On-chip mass spectrometric analysis in non-polar solvents by liquid beam infrared matrix-assisted laser dispersion/ionization.

By the on-chip integration of a droplet generator in front of an emitter tip, droplets of non-polar solvents are generated in a free jet of an aqueous matrix. When an IR laser irradiates this free liquid jet consisting of water as the continuous phase and the non-polar solvent as the dispersed droplet phase, the solutes in the droplets are ionized. This ionization at atmospheric pressure enables the mass spectrometric analysis of non-polar compounds with the aid of a surrounding aqueous matrix that absorbs IR light. This works both for non-polar solvents such as n-heptane and for water non-miscible solvents like chloroform. In a proof of concept study, this approach is applied to monitor a photooxidation of N-phenyl-1,2,3,4-tetrahydroisoquinoline. By using water as an infrared absorbing matrix, analytes, dissolved in non-polar solvents from reactions carried out on a microchip, can be desorbed and ionized for investigation by mass spectrometry.

Conversion Efficiencies of a Few Living Microbial Cells Detected at a High Throughput by Droplet-Based ESI-MS.

The label-free and sensitive detection of synthesis products from single microbial cells remains the bottleneck for determining the specific turnover numbers of individual whole-cell biocatalysts. We demonstrate the detection of lysine synthesized by only a few living cells in microfluidic droplets via mass spectrometry. Biocatalyst turnover numbers were analyzed using rationally designed reaction environments compatible with mass spectrometry, which were decoupled from cell growth and showed high specific turnover rates (∼1 fmol/(cell h)), high conversion yields (25%), and long-term catalyst stability (>14h). The heterogeneity of the cellular reactivity of only 15 ± 5 single biocatalysts per droplet could be demonstrated for the first time by parallelizing the droplet incubation. These results enable the resolution of biocatalysis beyond averages of populations. This is a key step toward quantifying specific reactivities of single cells as minimal functional catalytic units.

On-chip integration of organic synthesis and HPLC/MS analysis for monitoring stereoselective transformations at the micro-scale.

We present a microfluidic system, seamlessly integrating microflow and microbatch synthesis with a HPLC/nano-ESI-MS functionality on a single glass chip. The microfluidic approach allows to efficiently steer and dispense sample streams down to the nanoliter-range for studying reactions in quasi real-time. In a proof-of-concept study, the system was applied to explore amino-catalyzed reactions, including asymmetric iminium-catalyzed Friedel-Crafts alkylations in microflow and micro confined reaction vessels.

Rapid prototyping of microfluidic chips for dead-volume-free MS coupling.

A fast and straightforward method to prototype microfluidic chip systems for dead-volume-free hyphenation to electrospray-ionisation mass spectrometry is presented. The developed approach based on liquid-phase lithography provides an inexpensive and reliable access to microfluidic chips for MS coupling which can be manufactured in any laboratory with low technical demands. The rapid prototyping approach enables the seamless integration of capillaries serving as electrospray emitters with negligible dead volume. The high versatility of the presented prototyping method and the applicability of a variety of chip-based devices in different fields of lab-on-a-chip technology are established for analytical separations by means of chip-electrochromatography-MS and for continuous-flow synthesis using microreactor technology with MS detection.

Surface modification of PDMS microfluidic devices by controlled sulfuric acid treatment and the application in chip electrophoresis.

Herein, we present a straightforward surface modification technique for PDMS-based microfluidic devices. The method takes advantage of the high reactivity of concentrated sulfuric acid to enhance the surface properties of PDMS bulk material. This results in alteration of the surface morphology and chemical composition that is in-depth characterized by ATR-FTIR, EDX, SEM, and XPS. In comparison to untreated PDMS, modified substrates exhibit a significantly reduced diffusive uptake of small organic molecules while retaining its low electroosmotic properties. This was demonstrated by exposing the channels of a microfluidic device to concentrated rhodamine B solution followed by fluorescence microscopy. The surface modification procedure was used to improve chip-based electrophoretic separations. Separation efficiencies of FITC-labeled amines/amino acids obtained in treated and untreated PDMS-devices as well as in glass chips were compared. We obtained higher efficiencies in H2 SO4 treated PDMS chips compared to untreated ones but lower efficiencies than those obtained in commercial microfluidic glass devices.

An integrated microfluidic chip enabling control and spatially resolved monitoring of temperature in micro flow reactors.

A strength of microfluidic chip laboratories is the rapid heat transfer that, in principle, enables a very homogeneous temperature distribution in chemical processes. In order to exploit this potential, we present an integrated chip system where the temperature is precisely controlled and monitored at the microfluidic channel level. This is realized by integration of a luminescent temperature sensor layer into the fluidic structure together with inkjet-printed micro heating elements. This allows steering of the temperature at the microchannel level and monitoring of the reaction progress simultaneously. A fabrication procedure is presented that allows for straightforward integration of thin polymer layers with optical sensing functionality in microchannels of glass-polydimethylsiloxane (PDMS) chips of only 150 µm width and 29 µm height. Sensor layers consisting of polyacrylonitrile and a temperature-sensitive ruthenium tris-phenanthroline probe with film thicknesses of about 0.5 to 6 µm were generated by combining blade coating and abrasion techniques. Optimal coating procedures were developed and evaluated. The chip-integrated sensor layers were calibrated and investigated with respect to stability, reproducibility, and response times. These microchips allowed observation of temperature in a wide range with a signal change of around 1.6 % per K and a maximum resolution of around 0.07 K. The device is employed to study temperature-controlled continuous micro flow reactions. This is demonstrated exemplarily for the tryptic cleavage of coumarin-modified peptides via fluorescence detection.

Improving sensitivity in microchip electrophoresis coupled to ESI-MS/MS on the example of a cardiac drug mixture.

A comprehensive study for a sensitivity optimization in MCE with mass spectrometric detection is presented. As a text mixture, we chose a mixture of the cardiac drugs propranolol, bisoprolol, lidocaine, procaine and studied the effect of different chip layouts and experimental parameters with the aim of achieving both high sensitivity in MS detection and adequate chip electrophoretic separation. An important aspect was a comparison of microfluidic layouts containing various sheath-flow channels with that avoiding sheath-flow junctions on-chip. We utilized glass chips with monolithically integrated nanospray emitter tips coupled dead volume-free to an IT mass spectrometer running in fragmentation mode (MS(n) ). With this setup, detection limits down to 0.6 ng/mL for the model compound propranolol were achieved.

Label-free fluorescence detection of aromatic compounds in chip electrophoresis applying two-photon excitation and time-correlated single-photon counting.

In this study, we introduce time-resolved fluorescence detection with two-photon excitation at 532 nm for label-free analyte determination in microchip electrophoresis. In the developed method, information about analyte fluorescence lifetimes is collected by time-correlated single-photon counting, improving reliable peak assignment in electrophoretic separations. The determined limits of detection for serotonin, propranolol, and tryptophan were 51, 37, and 280 nM, respectively, using microfluidic chips made of fused silica. Applying two-photon excitation microchip separations and label-free detection could also be performed in borosilicate glass chips demonstrating the potential for label-free fluorescence detection in non-UV-transparent devices. Microchip electrophoresis with two-photon excited fluorescence detection was then applied for analyses of active compounds in plant extracts. Harmala alkaloids present in methanolic plant extracts from Peganum harmala could be separated within seconds and detected with on-the-fly determination of fluorescence lifetimes.

Chip-based separation devices coupled to mass spectrometry.

The hyphenation of miniaturized separation techniques like chip electrophoresis or chip chromatography to mass spectrometry (MS) is a highly active research area in modern separation science. Such methods are particularly attractive for comprehensive analysis of complex biological samples. They can handle extremely low sample amounts, with low solvent consumption. Furthermore they provide unsurpassed analysis speed together with the prospect of integrating several functional elements on a single multifunctional platform. In this article we review the latest developments in this emerging field of technology and summarize recent trends to face current and future challenges in chip-based biochemical analysis.

Monitoring on-chip Pictet-Spengler reactions by integrated analytical separation and label-free time-resolved fluorescence.

High-throughput screening for optimal reaction conditions and the search for efficient catalysts is of eminent importance in the development of chemical processes and for expanding the spectrum of synthetic methodologies in chemistry. In this context we report a novel approach for a microfluidic chemical laboratory integrating organic synthesis, separation and time-resolved fluorescence detection on a single microchip. The feasibility of our integrated laboratory is demonstrated by monitoring the formation of tetrahydroisoquinoline derivatives by Pictet-Spengler condensation. After on-chip reaction the products and residual starting material were separated enantioselectively on the same chip. On-chip deep UV laser-induced fluorescence detection with time-correlated single photon counting was applied for compound assignment. The system was utilized to screen reaction conditions and various substrates for Pictet-Spengler reactions on-chip. Finally, the microlab was successfully applied to investigate enantioselective reactions using BINOL-based phosphoric acids as organocatalysts.

Label-free analysis in chip electrophoresis applying deep UV fluorescence lifetime detection.

Herein we introduce deep UV fluorescence lifetime detection in microfluidics applied for label-free detection and identification of various aromatic analytes in chip electrophoresis. For this purpose, a frequency quadrupled Nd:YAG (neodymium-doped yttrium aluminum garnet) picosecond laser at 266 nm was incorporated into an inverse fluorescence microscope setup with time-correlated single photon counting detection. This allowed recording of photon timing with sub-nanosecond precision. Thereby fluorescence decay curves are gathered on-the-fly and average lifetimes can be determined for each substance in the electropherogram. The aromatic compounds serotonin, propranolol, 3-phenoxy-1,2-propanediol and tryptophan were electrophoretically separated using a fused-silica microchip. Average lifetimes were independently determined for each compound via bi-exponential tail fitting. Time-correlated single photon counting also allows the discrimination of background fluorescence in the time domain. This results in improved signal-to-noise-ratios as demonstrated for the above model analytes. Microchip electrophoretic separations with fluorescence lifetime detection were also performed with a protein mixture containing lysozyme, trypsinogen and chymotrypsinogen emphasizing the potential for biopolymer analysis.

Microfluidic chips for chirality exploration.

Microfluidic chips applied to the investigation of chirality allow reaction, separation and analysis of minuscule amounts of enantiomeric molecules. Chiral chip technology is employed in fields as diverse as pharmaceutical high throughput screening and deep space exploration missions.

Chip electrophoresis of active banana ingredients with label-free detection utilizing deep UV native fluorescence and mass spectrometry.

In the present work, we report on a rapid and straightforward approach for the determination of biologically active compounds in bananas applying microchip electrophoresis (MCE). For this purpose, we applied label-free detection utilizing deep UV fluorescence detection with excitation at 266 nm. Using this approach, we could identify dopamine and serotonin, their precursors tryptophan and tyrosine and also the isoquinoline alkaloid salsolinol in less than 1 min. In bananas, after 10 days of ripening, we additionally found the compound levodopa which is a metabolite of the tyrosine pathway. Quantitative analysis of extracts by external calibration revealed concentrations of serotonin, tryptophan, and tyrosine from 2.7 to 7.6 µg/mL with relative standard deviations of less than 3.5%. The corresponding calibration plots showed good linearity with correlation coefficients higher than 0.985. For reliable peak assignment, the compounds were also analyzed by coupling chip electrophoresis with mass spectrometry. This paper demonstrates exemplarily the applicability of MCE with native fluorescence detection for rapid analysis of natural compounds in fruits and reveals the potential of chip-based separation systems for the analysis of complex mixtures.

An integrated on-chip sirtuin assay.

A microchip-based assay to monitor the conversion of peptide substrates by human recombinant sirtuin 1 (hSIRT1) is presented. For this purpose a fused silica microchip consisting of a microfluidic separation structure with an integrated serpentine micromixer has been used. As substrate for the assay, we used a 9-fluorenylmethoxycarbonyl (Fmoc)-labeled tetrapeptide derived from the amino acid sequence of p53, a known substrate of hSIRT1. The Fmoc group at the N-terminus resulting from solid-phase peptide synthesis enabled deep UV laser-induced fluorescence detection with excitation at 266 nm. The enzymatic reaction of 0.1 U/µL hSIRT1 was carried out within the serpentine micromixer using a 400 µM solution of the peptide in buffer. In order to reduce protein adsorption, the reaction channel was dynamically coated with hydroxypropylmethyl cellulose. The substrate and the deacetylated product were separated by microchip electrophoresis on the same chip. The approach was successfully utilized to screen various SIRT inhibitors.