Utility of Schwann/2E and Sox10 in distinguishing CD57-negative olfactory groove schwannoma from olfactory ensheathing cell tumor: A case report and review of the literature.

We herein report a patient who was diagnosed as having olfactory groove schwannoma (OGS) which was negative for CD57 (Leu7) but positive for Schwann/2E and Sox10. A 13-year-old female with a chief complaint of headache was referred to our department due to a tumor lesion in the anterior skull base identified by magnetic resonance imaging (MRI). At the first visit, she did not exhibit altered consciousness, motor palsy, anosmia, seizures, or café au lait spots. On contrast-enhanced computed tomography (CT), a heterogeneously enhanced tumor, 50 × 45 × 50 mm in size, was observed at the anterior skull base. The left cribriform plate was thinner on bone window CT. The tumor exhibited strong, heterogeneous gadolinium enhancement on MRI as well. Slight tumor staining was observed by angiography of the left internal carotid artery but not the left external carotid artery. The patient was preoperatively diagnosed as having meningioma and underwent gross tumor resection via the basal interhemispheric approach. The tumor was strongly positive for S-100 protein and negative for epithelial membrane antigen and CD57 by immunostaining. The tumor was positive for both Schwann/2E and Sox10, which aided in the differential diagnosis between OGSs and olfactory ensheathing cell (OEC) tumors, and the definitive diagnosis was OGS. The assessment of immunoreactivities for Schwann/2E and Sox10 might be necessary to differentiate CD57-negative Schwannomas from OEC tumors.

Comparison of quantitative measurements of central nervous system tumour consistency and the associated preoperative imaging findings.

Purpose: Central nervous system (CNS) tumour consistency is one of the factors determining the difficulty of surgery for such lesions. We measured the consistency of surgically excised CNS tumour specimens using a hardness meter. The purpose of this study was to identify imaging parameters that reflect tumour consistency by comparing preoperative imaging findings with CNS tumour consistency measurements. Material and methods: Of 175 consecutive patients with CNS tumours who underwent surgery at our hospital between October 2012 and October 2018, 127 were included in this study (those whose specimens were difficult to measure were excluded). CNS tumour consistency was measured immediately after surgical excision using a hardness meter and compared with preoperative T1-weighted, T2-weighted (T2WI), fluid attenuated inversion recovery (FLAIR), diffusion-weighted imaging, gadolinium-enhanced magnetic resonance imaging, plain computed tomography (CT), and contrast-enhanced CT findings. Tumour consistency was also subjectively classified by the surgeon into soft, hard, or very hard. Results: The intracranial meningiomas were harder than the metastatic tumours and gliomas (p = 0.03 and p = 0.03, respectively). Among the intracranial meningiomas, the tumours that exhibited high intensity on T2WI were softer than those that displayed isointensity or low intensity (p < 0.001 and p < 0.001, respectively), and the isointense tumours were softer than the low intensity tumours (p = 0.02). Among the metastatic tumours, the tumours that exhibited high intensity on T2WI were softer than those that displayed isointensity or low intensity (p < 0.001 and p < 0.001, respectively). Among the intracranial meningiomas and metastatic tumours, significant correlations were detected between the T2WI findings and subjective tumour consistency according to the surgeon or quantitative tumour consistency (p = 0.01 and p = 0.03, respectively). Conclusions: The preoperative T2WI findings of intracranial meningiomas and metastatic tumours were significantly correlated with quantitatively measured tumour consistency and subjectively evaluated tumour consistency. Therefore, we concluded that T2WI findings are useful for preoperatively predicting the consistency of such tumours.

[Acute Changes in the Computed Tomography Findings of Mucocele Combined with Pituitary Adenoma:A Case Report].

INTRODUCTION: We report a rare case in which a pituitary tumor co-occurred with a giant mucocele. The mucocele's computed tomography(CT)values fell markedly when it collapsed, and we report the associated considerations. CASE: This case involved a 42-year-old male patient. For 20 years, his visual acuity had progressively declined, and it suddenly rapidly worsened over a month. Cranial CT revealed a massive tumor in the sphenoid sinus and a pituitary tumor. A region of high absorption extended from the paranasal sinus to the skull base. Two days after the patient's initial presentation, he experienced a sudden loss of vision. Therefore, we performed an urgent re-examination. The CT value of the paranasal lesion was found to have sharply declined. The sinus lesion was diagnosed as a mucocele. Emergent endoscopic surgery was performed. Actinomyces meyeri was detected in the samples cultures. DISCUSSION: The causes of mucocele exhibiting abnormally high signal intensity on CT include the accumulation of hemosiderin due to repeated bleeding in the cyst. Furthermore, we inferred that the Actinomyces meyeri had been taking up metallic elements in vivo for a long time. The marked reduction in the lesion's CT value was considered to have been due to the destruction of the mucocele. The contents of the mucocele flowed out and were replaced with newly produced mucus, which exhibits low absorption values. CONCLUSION: We treated a patient with a giant mucocele involving distraction of the frontal base and a pituitary adenoma. In such cases, surgery should be performed when visual acuity deteriorates suddenly.

Acute contrecoup epidural hematoma that developed without skull fracture in two adults: two case reports.

BACKGROUND: The incidence of acute epidural hematoma not accompanied by fracture is low, and it mostly occurs right below the impact point in children. Acute epidural hematoma on the contralateral side of the impact point without fracture is very rare. CASE PRESENTATION: Case 1: a 52-year-old Japanese woman fell and was bruised in the left occipital region, and acute epidural hematoma developed in the right frontal region. No fracture line was observed in the right frontal region on head computed tomography or during surgery, and the source of bleeding was the middle meningeal artery. Case 2: a 56-year-old Japanese man fell down the stairs and was bruised in the right occipital region, and acute epidural hematoma developed in the right occipital supra- and infratentorial regions and left frontal region. Separation of the lambdoid suture was noted in the right occipital region, but no fracture line was present in the left frontal region on either head computed tomography or during surgery, and the source of bleeding was the middle meningeal artery. CONCLUSIONS: Two rare cases of frontal contrecoup acute epidural hematoma without facture near the hematoma were reported. It is possible that the dura mater detaches from the inner surface of the skull due to cavitation theory-related negative pressure and blood vessels in the dura mater are damaged, causing contrecoup acute epidural hematoma even though no fracture occurs, for which careful course observation is necessary.

Operative simulation of anterior clinoidectomy using a rapid prototyping model molded by a three-dimensional printer.

BACKGROUND: As the anatomical three-dimensional (3D) positional relationship around the anterior clinoid process (ACP) is complex, experience of many surgeries is necessary to understand anterior clinoidectomy (AC). We prepared a 3D synthetic image from computed tomographic angiography (CTA) and magnetic resonance imaging (MRI) data and a rapid prototyping (RP) model from the imaging data using a 3D printer. The objective of this study was to evaluate anatomical reproduction of the 3D synthetic image and intraosseous region after AC in the RP model. In addition, the usefulness of the RP model for operative simulation was investigated. METHODS: The subjects were 51 patients who were examined by CTA and MRI before surgery. The size of the ACP, thickness and length of the optic nerve and artery, and intraosseous length after AC were measured in the 3D synthetic image and RP model, and reproducibility in the RP model was evaluated. In addition, 10 neurosurgeons performed AC in the completed RP models to investigate their usefulness for operative simulation. RESULTS: The RP model reproduced the region in the vicinity of the ACP in the 3D synthetic image, including the intraosseous region, at a high accuracy. In addition, drilling of the RP model was a useful operative simulation method of AC. CONCLUSIONS: The RP model of the vicinity of ACP, prepared using a 3D printer, showed favorable anatomical reproducibility, including reproduction of the intraosseous region. In addition, it was concluded that this RP model is useful as a surgical education tool for drilling.

A neurosurgical simulation of skull base tumors using a 3D printed rapid prototyping model containing mesh structures.

BACKGROUND: Deep regions are not visible in three-dimensional (3D) printed rapid prototyping (RP) models prepared from opaque materials, which is not the case with translucent images. The objectives of this study were to develop an RP model in which a skull base tumor was simulated using mesh, and to investigate its usefulness for surgical simulations by evaluating the visibility of its deep regions. METHODS: A 3D printer that employs binder jetting and is mainly used to prepare plaster models was used. RP models containing a solid tumor, no tumor, and a mesh tumor were prepared based on computed tomography, magnetic resonance imaging, and angiographic data for four cases of petroclival tumor. Twelve neurosurgeons graded the three types of RP model into the following four categories: 'clearly visible,' 'visible,' 'difficult to see,' and 'invisible,' based on the visibility of the internal carotid artery, basilar artery, and brain stem through a craniotomy performed via the combined transpetrosal approach. In addition, the 3D positional relationships between these structures and the tumor were assessed. RESULTS: The internal carotid artery, basilar artery, and brain stem and the positional relationships of these structures with the tumor were significantly more visible in the RP models with mesh tumors than in the RP models with solid or no tumors. CONCLUSIONS: The deep regions of PR models containing mesh skull base tumors were easy to visualize. This 3D printing-based method might be applicable to various surgical simulations.

Anatomical Reproducibility of a Head Model Molded by a Three-dimensional Printer.

We prepared rapid prototyping models of heads with unruptured cerebral aneurysm based on image data of computed tomography angiography (CTA) using a three-dimensional (3D) printer. The objective of this study was to evaluate the anatomical reproducibility and accuracy of these models by comparison with the CTA images on a monitor. The subjects were 22 patients with unruptured cerebral aneurysm who underwent preoperative CTA. Reproducibility of the microsurgical anatomy of skull bone and arteries, the length and thickness of the main arteries, and the size of cerebral aneurysm were compared between the CTA image and rapid prototyping model. The microsurgical anatomy and arteries were favorably reproduced, apart from a few minute regions, in the rapid prototyping models. No significant difference was noted in the measured lengths of the main arteries between the CTA image and rapid prototyping model, but errors were noted in their thickness (p < 0.001). A significant difference was also noted in the longitudinal diameter of the cerebral aneurysm (p < 0.01). Regarding the CTA image as the gold standard, reproducibility of the microsurgical anatomy of skull bone and main arteries was favorable in the rapid prototyping models prepared using a 3D printer. It was concluded that these models are useful tools for neurosurgical simulation. The thickness of the main arteries and size of cerebral aneurysm should be comprehensively judged including other neuroimaging in consideration of errors.

Levodopa-responsive benign tremulous parkinsonism.

BACKGROUND: Benign tremulous parkinsonism (BTP) is a tremor dominant syndrome characterized by mild, levodopa-resistant parkinsonism with limited disability or progression. CASE PRESENTATION: A 56-year-old woman presented with a 2-year history of tremor. Neurological examination revealed right-hand rest tremor and slow finger tapping with decreased amplitude; however, we did not observe posture tremor, rigidity, bradykinesia, or posture disability. She was diagnosed with Parkinson's disease (PD) and received levodopa/carbidopa, effectively treating her rest tremor. At the age of 61 years, reoccurrence of the rest tremor was successfully treated again with levodopa/carbidopa and selegiline. Approximately 11 years have passed since symptom onset and the patient shows no further disease progression. CONCLUSION: This case broadens the characterization of BTP to include levodopa-responsive PD.