Validated stability-indicating capillary electrophoresis method for the separation and determination of a fixed-dose combination of carvedilol and hydrochlorothiazide in tablets.

A novel, fast, sensitive, and specific capillary electrophoresis (CE) technique coupled to a diode array detector has been developed for the separation and simultaneous determination of carvedilol (CRV) and hydrochlorothiazide (HCT) in two combination formulations. The proposed method utilized a fused silica capillary (55 cm x75 microm id) and the background electrolyte solution phosphate buffer (12.5 mM, pH 7.4)-methanol (95+5, v/v). The separation was achieved at 30 kV applied voltage and 24 degree C. Atorvastatin (80 microg/mL) was chosen as the internal standard. The described method was linear over the range of 1-200 and 0.2-150 microg/mL for CRV and HCT, respectively. Intraday and interday RSD (n = 6) was < or =1.4%. The LOD values of CRV and HCT were 0.26 and 0.07 microg/mL, respectively. The validated CE method was successfully applied to the analysis of two commercial tablet dosage forms. Forced degradation studies were performed on bulk samples of the two drugs using thermal, photolytic, hydrolytic, and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. Degradation products produced as a result of stress studies did not interfere with the determination of CRV and HCT; the assay could, therefore, be considered stability-indicating.

Capillary electrophoretic determination of antimigraine formulations containing caffeine, ergotamine, paracetamol and domperidone or metoclopramide.

A novel, fast, sensitive and specific technique using capillary electrophoresis coupled to a diode array detector has been developed for the separation and simultaneous determination of two antimigraine mixtures in tablet formulation. The two combinations are ergotamine tartrate (ERG), caffeine (CAF) and paracetamol (PAR) with either domperidone (DOM), combination (I) or metoclopramide (MET), combination (II). The proposed method utilized a fused silica capillary (55 cm × 75 µm i.d.) and background electrolyte composed of phosphate buffer (25 mM, pH 9.8). The separation was achieved at 20 KV applied voltage and at 25°C. The described method was linear over the range of 1-80 and 2-100 µg/mL for CAF and MET, respectively, and 1-80 µg/mL for DOM, ERG and PAR. Intra-day and inter-day relative standard deviation (n = 5) was ≤1.10%. The limits of detection of CAF and PAR were 0.20 and 0.10 µg/mL, respectively, and 0.50 µg/mL for MET, DOM and ERG. Other aspects of analytical validation were also evaluated. The proposed method was successfully applied to the analysis of the two combinations in their tablets. Therefore, the proposed method is suitable for the routine control of these ingredients in multicomponent dosage forms.

Development of validated stability-indicating chromatographic method for the determination of fexofenadine hydrochloride and its related impurities in pharmaceutical tablets.

A simple reversed phase high performance liquid chromatographic method with diode array detector (HPLC-DAD) has been developed and subsequently validated for the determination of fexofenadine hydrochloride (FEX) and its related compounds; keto fexofenadine (Impurity A), meta isomer of fexofenadine (Impurity B), methyl ester of fexofenadine (Impurity C) in addition to the methyl ester of ketofexofenadine (Impurity D). The separation was based on the use of a Hypersil BDS C-18 analytical column (250 × 4.6 mm, i.d., 5 µm). The mobile phase consisted of a mixture of phosphate buffer containing 0.1 gm% of 1-octane sulphonic acid sodium salt monohydrate and 1% (v/v) of triethylamine, pH 2.7 and methanol (60:40, v/v). The separation was carried out at ambient temperature with a flow rate of 1.5 ml/min. Quantitation was achieved with UV detection at 215 nm using lisinopril as internal standard, with linear calibration curves at concentration ranges 0.1-50 µg/ml for FEX and its related compounds. The optimized conditions were used to develop a stability-indicating HPLC-DAD method for the quantitative determination of FEX and its related compounds in tablet dosage forms. The drugs were subjected to oxidation, hydrolysis, photolysis and heat to apply stress conditions. Complete separation was achieved for the parent compounds and all degradation products. The method was validated according to ICH guidelines in terms of accuracy, precision, robustness, limits of detection and quantitation and other aspects of analytical validation.