Process optimisation of defatted wheat germ protein extraction in a novel alkaline-based deep eutectic solvent (DES) via Box-Behnken experimental design (BBD).

This is the first study to provide a preliminary investigation into the recovery of protein from wheat germ and the prediction of their extraction conditions in microwave cavity using a novel DES solvent. The response surface methodology was used to predict the microwaved protein extraction conditions of the DWG. The effects of DES buffer-concentration (X1: 0.01-1.00 g/mL), microwave power (X2: 50-250 W), irradiation time (X3: 1-5 min) and sample-to-buffer ratio (X4: 1:10-1:50) were tested using a single factor and Box-Behnken experimental design. Under the optimized conditions (X1 = 0.52 g/mL, X2 = 186 W, X3 = 3.28 min, and X4 = 1:39) protein yield and absorbed microwave were obtained at the optimal value of 33.00 % and 677 J/min, respectively with no denaturation of the protein as validated from the SDS-PAGE gel electrophoresis profile. Consequently, this investigation provides a practical approach for the extraction of bioactive protein from DWG using a novel deep eutectic solvent.

Elucidating the Effects of Reaction Time on the Physicochemical Characterization of Valorized Synthesized Alumina.

Aluminum waste-can management in Malaysia has recently become a serious environmental and public health issue, particularly in metropolitan areas. This has prompted the need to valorize these waste-cans into value-added products using the most economical and environmentally friendly techniques. In this study, the sol-gel technique was used to synthesize high-quality alumina from the aluminum waste-cans collected. From this method, the observed peaks of the synthesized alumina were identified as diaspore (α-AlO(OH)), boehmite (γ-AlO(OH)), aluminum oxide, or gamma-alumina (γ-Al2O3) crystalline structure and corundum. The morphological configuration, microstructure, and functional group properties of the synthesized alumina were evaluated. All the synthesized alumina exhibited a non-spherical shape and appeared to have hexagonal-like shape particles. Moreover, the XRD patterns of the synthesized alumina AL-6-30 and AL-12-30 exhibited a small angle (1-10°) with no XRD peak, which indicated a mesoporous pore structure with no long-range order. The overall results of γ-alumina synthesized from the aluminum waste-cans showed an optimal condition in producing a highly structured γ-alumina with excellent surface-area characteristics. The synthesized alumina exhibited stronger and highly crystalline functional characteristics almost comparable with the commercially available brands on the market.

Statistical Optimization of Flavonoid and Antioxidant Recovery from Macerated Chinese and Malaysian Lotus Root (Nelumbo nucifera) Using Response Surface Methodology.

In this study, the combination of parameters required for optimal extraction of anti-oxidative components from the Chinese lotus (CLR) and Malaysian lotus (MLR) roots were carefully investigated. Box-Behnken design was employed to optimize the pH (X1: 2-3), extraction time (X2: 0.5-1.5 h) and solvent-to-sample ratio (X3: 20-40 mL/g) to obtain a high flavonoid yield with high % DPPHsc free radical scavenging and Ferric-reducing power assay (FRAP). The analysis of variance clearly showed the significant contribution of quadratic model for all responses. The optimal conditions for both Chinese lotus (CLR) and Malaysian lotus (MLR) roots were obtained as: CLR: X1 = 2.5; X2 = 0.5 h; X3 = 40 mL/g; MLR: X1 = 2.4; X2 = 0.5 h; X3 = 40 mL/g. These optimum conditions gave (a) Total flavonoid content (TFC) of 0.599 mg PCE/g sample and 0.549 mg PCE/g sample, respectively; (b) % DPPHsc of 48.36% and 29.11%, respectively; (c) FRAP value of 2.07 mM FeSO4 and 1.89 mM FeSO4, respectively. A close agreement between predicted and experimental values was found. The result obtained succinctly revealed that the Chinese lotus exhibited higher antioxidant and total flavonoid content when compared with the Malaysia lotus root at optimum extraction condition.

Optimisation of microwave-assisted extraction and functional elucidation of bioactive compounds from Cola nitida pod.

INTRODUCTION: The quality characteristics and stability of phenolic by-products from Cola nitida wastes are critical factors for drug formulation and food nutraceutical applications. OBJECTIVES: In this study, the effect of electromagnetic-based microwave-reflux extraction on the total phenolic content, antioxidant capacity, morphological characteristics, physisorption and chromatographic phenolic profiles were successfully investigated. These physicochemical analyses are often employed in the standardisation of dried herbal and food nutraceutical products. MATERIAL AND METHODS: In this study, the electromagnetic-based extraction process was optimised using the Box-Behnken design. The oleoresin bio-products were subsequently characterised to determine the total phenolic content, morphological and microstructural degradation. These analyses were conducted to elucidate the effect of the microwave heating on the C. nitida pod powder. RESULTS: From the predicted response, the optimal percentage yield was achieved at 26.20% under 5.39 min of irradiation time, 440 W microwave power and oven temperature of 55°C. Moreover, the rapid estimation of the phenolic content and antioxidant capacity were recorded at 124.84 ± 0.064 mg gallic acid equivalent (GAE)/g dry weight (d.w.) and 6.93 ± 0.34 µg/mL, respectively. The physicochemical characterisation results from the Fourier-transform infrared spectroscopy, field emission scanning electron microscopy and physisorption analyses showed remarkable changes in the micro-surface area (13.66%) characteristics. CONCLUSION: The recorded optimal conditions established a basis for future scale-up of microwave extraction parameters with a potential for maximum yield. The physiochemical characterisation revealed the functional characteristics of C. nitida and their tolerance to microwave heating.

Holistic approach to microwave-reflux extraction and thermo-analytical fingerprints of under-utilized Artocarpus heterophyllus seed wastes.

The increase in wastes generated from jackfruit seeds has been largely under-utilized in Malaysia. Due to the high nutritional and medicinal content embedded in the cellulosic structure of jackfruit wastes, a need then arises for their physicochemical elucidations. In this study, the extraction of Artocarpus heterophyllus seed was carefully investigated using Taguchi orthogonal optimization design. Complete functional group characteristics and chemical profile of the A. heterophyllus seed extracts were obtained using different physicochemical characterization. The optimal conditions of the microwave extraction parameters were determined at 5 min of irradiation time, 450 W of power and 50 °C of temperature. Under this condition, the optimal yield of 17.34 (mg/g) % was achieved at an SNR ratio of 24.78. The mass spectrometry analysis tentatively identified a total of 90 and 148 secondary metabolites at positive and negative ESI modes, respectively. The chemical profile obtained provided a baseline reference for further investigation on the food and medicinal bioactive from Artocarpus heterophyllus seed oleoresins. The FT-infrared emission spectrum shows the presence of some specific carbohydrates and amide protein functional groups directly linked to C-O (1008 cm-1) the carbonyl (C=O) groups, respectively. Moreover, the morphological characteristics of the jackfruit raw and crude extracts conspicuously revealed large-sized globules which suggest the carbohydrates and protein contents. The result of this study indicates that the use of microwave extraction technology produced high-quality extracts with lower degradation of the thermal labile constituents. This will assist in determining the suitable conditions necessary for the total recovery of medicinal and nutritional constituents and conversion of agricultural waste products into useful products.

Data article on elemental and metabolomic-based alkaloidal composition in black pepper oleoresin using a positive ESI-mode LC-QToF and ICP-mass spectroscopy.

This paper contains data from the elemental and phytochemical profiling of black pepper oleoresin extracts using the LC-MS QToF and ICP-MS analysis. In recent years studies have shown the medicinal properties of extracts from these two cultivars of Piper nigrum. The medicinal properties are attributed to the presence of many secondary metabolites and mineral element in them. The phytochemical profiling was conducted using a Liquid Chromatography equipped with an electrospray time-of-flight mass spectrometer detectors. The mass spectrometer was equipped with an electrospray ionization sources operated in positive ion mode. The alkaloid compounds in the optimized black pepper extract were tentatively characterized in accordance with their ions׳ mass fragmentation.