The biodegradative effect of Tenebrio molitor Linnaeus larvae on vulcanized SBR and tire crumb.

The overall world consumption rate of rubber tends to increase by an average of 2.8% per year in the period between 2017 and 2025. Rubber residues represent a severe problem to both health and environment due to their cross-linked structure that offers a prolonged degradation rate. A good solution to eliminate this problem is recycling and recovery, aiming at the production of new materials. The tire crumb can be recycled by chemical/biological recovery, where the elastomer is devulcanized, or by physical recovery, where the three-dimensional network is transformed into small fragments. In this study, we investigated the bio-degradation effect caused by Mealworms (the larvae of Tenebrio molitor Linnaeus) on vulcanized SBR-rubber and tire crumb as a desulphurization method. The surface modifications of both rubbers were studied by instrumental techniques: FTIR-ATR, TGA, XRD, and SEM. The cross-linking degree of the rubber was determined via circular condensation method. The obtained results show that the Tenebrio molitor could survive after three weeks of direct contact with SBR-rubber and tire crumb as the only alimentation. There was a declining effect of cross-linking degree by increasing the contact time between the rubbers and larvae. The FTIR results indicate surface/chemical modifications of the rubbers and the SEM results show the free sulfur after it was released in the form of sulfur flower-like. Also, the TGA results highlight a difference in the degrading behavior and residues of the treated and non-treated rubbers. Therefore, the reported results were promising, demonstrating the biodegradation effect caused by the Tenebrio molitor mealworms, highlighting an alternative and natural mean of degrading vulcanized rubber residues.

Use of mix of clay/solid waste from steel works for civil construction materials.

The present study focuses on the use of solid waste generated by the steel works in Brazil for manufacturing clay-based structural products. The waste sample was characterized regarding chemical composition, X-ray diffraction, particle size, morphology, specific surface and plastic properties. The waste was added in gradual proportions to a kaolinitic clay from zero up to 3 wt.%. Ceramic bodies were formed by vacuum extrusion and fired at 950 degrees C. The physical-mechanical properties (linear shrinkage, water absorption, apparent density and flexural strength) of the resulting clay/solid waste mixtures were determined. In addition, leaching tests were performed according Brazilian Standards as well as a preliminary analysis of gases evolved during the thermal process. It was found that the solid waste is formed by irregular particles, ranging in size from 1 to 500 microm. The test results indicate that solid wastes generated by steel works can be used as filler in construction materials, thereby increasing reuse in an environmentally safe manner.