RESUMO
The data presented in this article are related to the research article entitled "Two-dimensional Pd-cellulose with optimized morphology for the effective solar to steam generation (Omelianovych et al., Desalination, 535, 115820 (2023)). We provide complementary analysis of the plasma synthesis parameters, such as plasma power optimization, which were omitted in the original research. The SEM images, XRD micrographs, XPS spectra, and evaporation performance of various plasma-synthesized Pd-cellulose absorbers are presented.
RESUMO
Solar-to-steam (STS) generation based on plasmonic materials has attracted significant attention as a green method for producing fresh water. Herein, a simple in situ method is introduced to fabricate Au nanoparticles (AuNPs) on cellulose filter papers as dual-functional substrates for STS generation and surface-enhanced Raman spectroscopy (SERS) sensing. The substrates exhibit 90% of broadband solar absorption between 350 and 1800 nm and achieve an evaporation rate of 0.96 kg·m-2·h-1 under 1-sun illumination, room temperature of 20 °C, and relative humidity of 40%. The STS generation of the substrate is stable during 30 h continuous operation. Enriched SERS hotspots between AuNPs endow the substrates with the ability to detect chemical contamination in water with ppb limits of detection for rhodamine 6G dye and melamine. To demonstrate dual-functional properties, the contaminated water was analyzed with SERS and purified by STS. The purified water was then analyzed with SERS to confirm its purity. The developed substrate can be an improved and suitable candidate for fresh water production and qualification.
RESUMO
This study is the first to quantify energy band alignments at a nanostructured TiO2/Au22(SG)18 cluster interface using X-ray photoelectron spectroscopy. The d-band of Au clusters shows band-like character and occupied states at the Fermi level are not detected. The results provide evidence of the existence of a finite optical energy gap in Au22(SG)18 clusters and the molecular-like nature of these clusters. The pinning position of the Fermi energy level at the interface was determined to be 2.8 and 1.3 eV higher than the top of the TiO2 valence band and the highest occupied molecular orbit level of the Au clusters, respectively. A diffuse reflectance and absorption analysis quantified a 3.2 eV bandgap of the TiO2 layer and a 2.2 eV energy gap between the highest occupied molecular orbit (HOMO) and the lowest unoccupied molecular orbit (LUMO) levels of the Au clusters. Thus, a cliff-like offset of 0.5 eV between the LUMO level and the TiO2 conduction band was determined. The cliff-like offset of 0.5 eV provides room for improving the efficiency of metal-cluster-sensitized solar cells (MCSSC) further by lowering the LUMO level through a change in the cluster size. The offset of 0.5 eV between the HOMO level and the 3I-/I-3 redox level yields a remarkable loss-in-potential, which implies the possibility of increasing the open-circuit voltage further by properly replacing the redox couple in the MCSSCs.
RESUMO
The data presented in this article are related to the research article entitled "NiCoPt/Graphene-dot Nanosponge as a Highly Stable Electrocatalyst for Efficient Hydrogen Evolution Reaction in Acidic Electrolyte (N.-A. Nguyen et al., 2020) [1]. This article reports a simple method to synthesize NiCoPt/Graphene-dot as an electrocatalyst with low Pt loading but high hydrogen evolution reaction (HER) performance. The morphology of NiCoPt/Graphene-dot was analyzed by scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) techniques. The structural and chemical properties of NiCoPt/Graphene-dot were investigated by using X-ray Powder Diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques.
