Computational analysis of the flow of bile in human cystic duct.

Computational fluid dynamic (CFD) simulations of the three-dimensional flow structures in realistic cystic ducts have been performed to obtain quantitative readings of the flow parameters to compare with clinical measurements. Resin casts of real patients' cystic ducts lumen that possess representative anatomical features were scanned to obtain three-dimensional flow domains that were used in the numerical analysis. The convoluting nature of the studied cystic ducts resulted in strong secondary flow that contributed towards a dimensionless pressure drop that is four times higher than those of a straight circular tube of an equivalent length and average diameter. The numerical pressure drop results across the cystic duct compared very well with those obtained from clinical observations which indicate that CFD is an appropriate tool to investigate the flow and functions of the biliary system. From the hydrodynamic point of view, the cystic duct lumen seems to serve as a passive resistor that strives to provide a constant amount of resistance to control the flow of bile out of the gallbladder. This is mainly achieved by the coupling of the secondary flow effects and bile rheology to provide flow resistance.

Investigation of the functional three-dimensional anatomy of the human cystic duct: a single helix?

Clinical research into the formation of gallstones has indicated that the anatomy of the cystic duct is one of a number of factors contributing to the formation of gallstones. The cystic duct allows low-viscosity hepatic bile to enter the gallbladder under low pressure and the expulsion of a more viscous gallbladder bile, but little is known about this transport mechanism and the effect of anatomical variations in structure. This article describes the variation in geometry of the cystic duct, obtained from acrylic resin casts of the neck and first part of the cystic duct in gallbladders removed for gallstone disease and obtained from patients undergoing partial hepatectomy for metastatic disease. The data obtained allowed us to formulate a number of standard terms for describing cystic duct morphology and demonstrate that the term "spiral valve" is only partially correct when describing the duct anatomy. In over half of the casts, spiraling was not the dominant feature of the cystic duct. Additionally, the term valve implies active resistance to flow in one direction, whereas the internal baffles of the cystic duct would serve to regulate bile flow in both directions. These data are useful for realistic 3D modeling of fluid-structure interactions of the flow of bile in the human cystic duct.

The flow of bile in the human cystic duct.

Clinical studies suggest that the flow of bile in the biliary system may be a contributing factor in the pathogenesis of cholelithiasis, but little is known about its transport mechanism. This paper reports a numerical study of steady flow in human cystic duct models. In order to obtain parametric data on the effects of various anatomical features in the cystic duct, idealised models were constructed, first with staggered baffles in a channel to represent the valves of Heister and lumen. The qualitative consistency of these findings are validated by modelling two of the real cystic ducts obtained from operative cholangiograms. Three-dimensional (3D) models were also constructed to further verify the two-dimensional (2D) results. It was found that the most significant geometric parameter affecting resistance is the baffle clearance (lumen size), followed by the number of baffles (number of folds in the valves of Heister), whilst the least significant ones are the curvature of the cystic duct and the angle between the neck and the gallbladder. The study presented here forms part of a larger project to understand the functions of the human cystic duct, especially the influence of its various anatomical structures on the resistance to bile flow, so that it may aid the assessment of the risk of stone formation in the gallbladder.

Submental intubation in a patient with beta-thalassaemia major undergoing elective maxillary and mandibular osteotomies.

A 33-yr-old woman with marked maxillo-facial deformities as a result of underlying beta-thalassaemia major was to undergo corrective maxillary and mandibular osteotomies. The placement of an endotracheal tube posed a problem in this patient because of anatomical deformities in her nasal passage, surgical constraints on using the oral route, and reluctance of the patient to have a tracheostomy. This case report describes the use of a submental tracheal intubation technique, and the associated anaesthetic difficulties encountered in patients with this pathology.

Distribution of aldoxime dehydratase in microorganisms.

The distribution of phenylacetaldoxime-degrading and pyridine-3-aldoxime-degrading ability was examined with intact cells of 975 microorganisms, including 45 genera of bacteria, 11 genera of actinomyces, 22 genera of yeasts, and 37 genera of fungi, by monitoring the decrease of the aldoximes by high-pressure liquid chromatography. The abilities were found to be widely distributed in bacteria, actinomyces, fungi, and some yeasts: 98 and 107 strains degraded phenylacetaldoxime and pyridine-3-aldoxime, respectively. All of the active strains exhibited not only the aldoxime-dehydration activity to form nitrile but also nitrile-hydrolyzing activity. On the other hand, all of 19 nitrile-degrading microorganisms (13 species, 7 genera) were found to exhibit aldoxime dehydration activity. It is shown that aldoxime dehydratase and nitrile-hydrolyzing activities are widely distributed among 188 aldoxime and 19 nitrile degraders and that the enzymes were induced by aldoximes or nitriles.

Isolation and characterization of a bacterium possessing a novel aldoxime-dehydration activity and nitrile-degrading enzymes.

A bacterial strain capable of utilizing E-pyridine-3-aldoxime as a nitrogen source was isolated from soil after a 4-month acclimation period and was identified as Rhodococcus sp. The strain contained a novel aldoxime dehydration activity that catalyzed a stoichiometric dehydration of E-pyridine-3-aldoxime to form 3-cyanopyridine. The enzyme activity was induced by various aldoximes and nitriles. The strain metabolized the aldoxime as follows: E-pyridine-3-aldoxime was dehydrated to form 3-cyanopyridine, which was converted to nicotinamide by a nitrile hydratase, and the nicotinamide was successively hydrolyzed to nicotinic acid by an amidase.

New agents, the circle system and short procedures.

Sevoflurane, desflurane and isoflurane were compared using a circle system in 97 patients undergoing short surgical procedures. Using initial high flows, the time intervals to equilibration between inspired and end-expired agent concentrations were measured; equilibration was defined as FE/FI = 0.8. The mean (SD) times obtained for sevoflurane, desflurane and isoflurane were 8.2 (2.1) min, 3.8 (0.7) min and 19.7 (6.5) min, respectively. These times were significantly different from each other (p < 0.0001). After equilibration total flow were reduced to 500 ml.min-1; at these flows the initial decline in end-expired agent concentration was minimal with desflurane, intermediate with sevoflurane and greatest with isoflurane. Both desflurane and sevoflurane are appropriate for efficient use of the circle system during short anaesthetics.

Anaesthesia and the Internet.

The Internet is a network of computers that allows rapid transfer of information throughout the world. The number of medical, and particularly anaesthetic, resources is rapidly increasing. This article briefly describes the Internet and its features which may be of interest to anaesthetists and intensivists in the United Kingdom, together with some of the tools for working with them.

Fresh gas flow requirements during spontaneous ventilation: fresh gas flow to total ventilation ratio or ml kg-1 min-1?

Both the performance of breathing systems and recommendations for the fresh gas flows to be used in patients breathing spontaneously can be expressed in ml kg-1 min-1 or fresh gas: total ventilation ratio (VF:VE). We have examined the relationship between these two descriptions. The data of 106 subjects (awake volunteers and anaesthetized patients) were retrieved from the archives of previous work performed in our department. The two methods of describing the requisite fresh gas produced different results, with correlation coefficients (r) between the methods of r = 0.69 and r = 0.49 for the awake and anaesthetized groups, respectively. The results of the multiple regression models suggest that both baseline total ventilation and body weight may be used to predict the fresh gas flow requirements, but residual analysis did not discriminate which method was a better predictor.

The additional work of breathing imposed by Mapleson A systems.

The additional work attributable to breathing through five Mapleson A anaesthetic breathing systems (Magill, Lack, Parallel Lack, Humphrey ADE and Enclosed Magill) was studied using a lung model. With all five systems, the additional work was found to be a function of fresh gas flow, respiratory flow as well as system geometry. Within the range of fresh gas flow and respiratory flow studied, the additional work ranged between 80 mJ.l-1 and 182 mJ.l-1. Expiratory work was always greater than the inspiratory workload. Increasing fresh gas inflow into the system increases expiratory work, both resistive and elastic components. The Magill system posed the least work expenditure. The values for the additional work obtained with the lung model were of the same order of magnitude when measurements were taken in volunteers.

The parallel Lack anaesthetic breathing system.

The parallel Lack system is a new modification of the Mapleson A system comprising separate inspiratory and expiratory tubes. To determine that the function of the system was that anticipated of a Mapleson A, the fresh gas flow requirements to prevent rebreathing during spontaneous ventilation were assessed in three situations: (1) a lung model (2) conscious volunteers and (3) anaesthetised patients. Two sets of criteria to define rebreathing were used; (A) those based on changes in ventilation or end-expired carbon dioxide tension and (B) minimum inspired carbon dioxide tension. Using A, rebreathing occurred at a fresh gas flow to minute ventilation ratio (VF/VE) of 0.75 for the lung model, and 0.73 for conscious volunteers. These results were comparable to those obtained for a Magill attachment. They were also close to the point at which mechanical dead space began to increase in the lung model. Criteria B gave much lower values for the onset of rebreathing. Rebreathing was present by criteria A in five of the six anaesthetised patients at a fresh gas flow of 60 ml.kg-1.min-1 (VF/VF of 0.78). The results confirm that the parallel Lack behaves as a Mapleson A system. The resistance to breathing posed by the parallel Lack was also comparable to the Magill system.

The rebreathing characteristics of the Hudson oxygen mask.

A lung model was used to study the effect of varying minute ventilation, oxygen flow and inspiratory : expiratory ratio on the rebreathing characteristics of the Hudson oxygen mask. The onset of rebreathing was detected using two different sets of criteria; those defined by Kain et al. and Humphrey. The onset of rebreathing was also quantified in terms of the inspired volume of carbon dioxide and increases in deadspace. The magnitude of rebreathing was increased by reducing oxygen inflow and increasing minute ventilation. Variation in I : E ratio between 1 : 1 and 1 : 4 had little effect on rebreathing. Using the clinical criteria of Kain et al, the onset of rebreathing was detected when oxygen inflow/minute ventilation ratio was reduced below 0.78 on average. With the other criterion, rebreathing occurred when the ratio was 0.46.

Extra inspiratory work of breathing imposed by cricothyrotomy devices.

Using a lung model for spontaneous ventilation, we have assessed the additional work of inspiration imposed by a variety of cannulae ranging from the 12- and 14-gauge intravascular cannulae to the 8.0-mm i.d. adult tracheostomy tube. Work (W) ranged between 9 and 2262 mJ litre-1 and power (W) between 0.2 and 37.7 mW litre-1 min; the smallest values were obtained with the 8.0-mm i.d. adult tracheostomy tube and the 12- and 14-gauge intravascular cannulae gave the largest values. With any given cannula, W and W were influenced by ventilation (tidal volume and frequency) and ventilatory wave pattern of the analogue lung. The results obtained from the 12- and 14-gauge cannulae represent what is probably an excessive inspiratory workload, whereas the other four devices (Portex MiniTrach, 4.0, 6.0 and 8.0 tracheostomy tubes) may be suitable in the short term for relieving airway obstruction and compatible with spontaneous ventilation.

Pre-oxygenation: the Hudson mask as an alternative technique.

The use of a simple oxygen facemask (Hudson) with high oxygen inflow (48 l.min-1) was investigated as a technique for pre-oxygenation, comparing it with the Magill system (oxygen flow: 100 ml.kg-1.min-1). One hundred and thirty-eight patients scheduled for elective gynaecological and orthopaedic surgery were studied: group 1, Hudson mask and group 2, Magill system (ASA 1-2, n = 107); group 3, Hudson mask and group 4, Magill system (ASA 3, n = 30). Pre-oxygenation was assessed by measuring the times to 97%, 95% and 93% arterial desaturation (finger pulse oximetry) following 3 min of pre-oxygenation. The times taken to achieve these end-points in all the study groups suggest that the Hudson mask offers an alternative technique for pre-oxygenation.

Nitrous oxide-oxygen analgesia: the performance of the MC mask delivery system.

Nitrous oxide administration via an oxygen facemask such as the Mary Catterall (MC) is an accepted technique for supplementing regional anaesthesia. This study assessed the range of nitrous oxide and oxygen concentrations delivered to the trachea using a mechanical lung model. The inspired concentrations of these two gases were determined by the total fresh gas inflow rates, their concentrations in the fresh gas mixture and the peak inspiratory flow rate of the analogue lung. A 1:1 nitrous oxide-oxygen mixture in the fresh gas with an inflow rate of 4-6 l/min is recommended to ensure adequate oxygen delivery into the trachea as well as achieving the therapeutic concentrations of nitrous oxide (20-30%).

An evaluation of oxygen delivery using nasal prongs.

Oxygen delivery using nasal prongs was assessed using a lung model for spontaneous ventilation. The analogue lung was attached to a manikin, which provided a model of the 'face and pharynx' to which the nasal prongs were applied. Oxygen concentrations were measured in the model trachea at varying fresh gas inflow and peak inspiratory flows. The study demonstrated enormous variability in the both the peak-inspired (26.3-90.0%) and end-expired concentrations (25.2-78.6%) of oxygen delivered to the trachea. There was a regular relationship between the ratio of peak inspiratory flows, expressed over fresh gas inflow and the end-expired oxygen concentrations which could allow estimation of inspired oxygen concentration.