Putting our heads together: The future of craniopagus twin separation.

Computer-assisted design and computer-assisted modeling (CAD/CAM), virtual surgical planning (VSP) and augmented/virtual reality (AR/VR) aid our ability to plan and perform complex craniofacial procedures. This study seeks to define the role of the aforementioned techniques in the separation of craniopagus conjoined twins. Six teams were identified who had successfully performed craniopagus twin separation with the use of CAD/CAM, VSP and/or AR/VR. Surgeons involved in separating craniopagus twins have increasingly utilized tools such as CAD/CAM models, VSP and AR/VR to plan and execute successful separation, and these tools are associated with higher success rates than historical controls.

Slow oscillation-spindle cross-frequency coupling predicts overnight declarative memory consolidation in older adults.

Cross-frequency coupling (CFC) between brain oscillations during non-rapid-eye-movement (NREM) sleep (e.g. slow oscillations [SO] and spindles) may be a neural mechanism of overnight memory consolidation. Declines in CFC across the lifespan might accompany coinciding memory problems with ageing. However, there are few reports of CFC changes during sleep after learning in older adults, controlling for baseline effects. Our objective was to examine NREM CFC in healthy older adults, with an emphasis on spindle activity and SOs from frontal electroencephalogram (EEG), during a learning night after a declarative learning task, as compared to a baseline night without learning. Twenty-five older adults (M [SD] age = 69.12 [5.53] years; 64% female) completed a two-night study, with a pre- and post-sleep word-pair associates task completed on the second night. SO-spindle coupling strength and a measure of coupling phase distance from the SO up-state were both examined for between-night differences and associations with memory consolidation. Coupling strength and phase distance from the up-state peak were both stable between nights. Change in coupling strength between nights was not associated with memory consolidation, but a shift in coupling phase towards (vs. away from) the up-state peak after learning predicted better memory consolidation. Also, an exploratory interaction model suggested that associations between coupling phase closer to the up-state peak and memory consolidation may be moderated by higher (vs. lower) coupling strength. This study supports a role for NREM CFC in sleep-related memory consolidation in older adults.

Youth Team Sports Participation Associates With Reduced Dimensional Psychopathology Through Interaction With Biological Risk Factors.

Background: Physical activity is associated with mental health benefits in youth. Here, we used causal inference and triangulation with 2 levels of biology to substantiate relationships between sports participation and dimensional psychopathology in youths. Methods: Baseline data from the Adolescent Brain Cognitive Development (ABCD) Study, which recruited children from 9 to 10 years of age across the United States, were included in multilevel regression models to assess relationships between lifetime participation in team sports (TS), individual sports, and nonsports activities and Child Behavior Checklist (CBCL) scores. We calculated polygenic risk scores for 8 psychiatric disorders to assess interactions with sports exposure on CBCL scores among European descendants. Following rigorous quality control, FreeSurfer-extracted brain magnetic resonance imaging structural data were examined for mediation of CBCL-activities relationships. Results: Among those with complete data (N = 10,411), causal estimates using inverse probability weighting associated lifetime TS exposure with a 1.05-point reduction in CBCL total (95% CI, -1.54 to -0.56, p < .0001) a relationship that was specific to TS and strengthened with more years of exposure. Associations of attention-deficit/hyperactivity disorder polygenic loading with CBCL total weakened in European children with TS exposure (n = 4041; beta = -0.93, SE = 0.38, p = .013). Furthermore, TS participation and lower CBCL each associated with increased subcortical volumes (n = 8197). Subcortical volume mediated 5.5% of TS effects on CBCL total. Conclusions: Our findings support prior associations of TS participation with lower psychopathology in youths through additional studies that demonstrate specificity, dose response, and coherence across 2 levels of biology. Longitudinal studies that further clarify causal relationships may justify interventional studies of TS for high-risk youth.

Comparing Postoperative Taping vs Customized 3D Splints for Managing Nasal Edema after Rhinoplasty.

Background: Significant swelling after rhinoplasty can temporarily obscure results and lead to distress for patients and surgeons. We recently developed three dimensional (3D)-printed nasal splints that aim to protect the nose and limit edema by applying gentle compression. This prospective, randomized study compares postoperative nasal edema in patients being treated with traditional taping versus 3D-printed splints. Methods: Patients undergoing primary rhinoplasty (2019-2020) were randomized into two groups: taping versus 3D-printed splinting. For 12 weeks, patients either applied steri-strips to the dorsum and tip, or used 3D-printed splints, which were based on nasal simulations. The percentage change in volume (cm3) was calculated for the total nose, dorsum, and nasal tip at various time points. Results: Nasal taping (n = 34) demonstrated a volume reduction of 4.8%, 9.9%, 10.0%, 10.3%, and 10.6% (compared with baseline) at 2 weeks, 6 weeks, 3 months, 6 months, and 1 year, respectively. In contrast, the resolution of swelling with 3D splints (n = 36) was 5.0%, 8.6%, 11.0%, 14.9%, and 15.1% at the same time points. Inter-group comparison showed that 3D splints led to significantly less edema of the total nose at 6 months and 1 year (P ≤ 0.05), as well as consistent reductions in the tip and dorsum, specifically (1 year, P ≤ 0.1, 0.01, respectively). Conclusions: 3D-printed splints after rhinoplasty leads to a significant reduction of edema, most noticeable at 6 months and 1 year. This study suggests that customized 3D-printed splints offer an effective clinical alternative to traditional taping to reduce postoperative edema after rhinoplasty.

Current Trends in Ideal Nasal Aesthetics Show Younger Patients Have a Preference Toward Longer Augmented Noses.

Background: Aesthetic norms fluctuate over time and often result in generational differences in preferred ideal nasal aesthetics. While some traditional concepts of the ideal nasal aesthetic have been suggested in our literature, there has been no study to date that has identified contemporary preferences across different age groups. Objectives: To understand the general population's current perception of ideal nasal profiles. Methods: Two-dimensional images of female noses (n = 10) of varying ethnicities were simulated to alter either the radix height or nasolabial angle (NLA) independently. Radix height was manipulated by increasing or decreasing the height by 5 mm relative to baseline. For NLA, 3 images were created with the following measurements: (1) 90°, (2) 100°, and (3) 110°. Groups were categorized by generation and age at the time of completing the study: Generation Z (Gen Z; age 18-23), Millennial 20s (age 24-30), Millennial 30s (age 31-39), and Generation X (Gen X; age 40-55). Each figure consisted of either 3 variations in radix height (n = 10) or 3 variations in NLA (n = 10). Within each figure, volunteers were asked to choose their preferred nose. Results: The younger generations, Gen Z and Millennial 20s and 30s, preferred a more augmented radix compared to Gen X which preferred a baseline radix height. Gen Z, Millennial 20s, and Gen X preferred a 90° NLA, while Millennial 30s preferred an NLA of 100°. Conclusions: The authors found that younger populations (Gen Z, Millennial 20s, and Millennial 30s) preferred a more augmented appearance to the nasal radix and, on average, a more acute NLA than published data suggest.

Topical Tranexamic Acid Does Not Reduce The Incidence Of Hematoma In Reduction Mammoplasty: A Double-Blinded, Randomized Placebo-Controlled Trial.

BACKGROUND: Breast reduction mammoplasty (BRM) is among the most common procedures in plastic surgery, with a 1-7% postoperative hematoma incidence reported. Tranexamic acid (TXA) has been shown to reduce perioperative bleeding and need for transfusion when administered intravenously or topically, but remains underutilized in plastic surgery. This study aims to investigate whether topical administration of topical TXA reduces postoperative hematoma following BRM. METHODS: A double-blinded, randomized controlled trial of 98 patients (196 breasts) undergoing bilateral primary reduction mammoplasty at a single academic institution was performed. Patients were used as internal matched controls, with one breast randomized to receive 1000mg of topical TXA before closure, and the other receiving saline. All members of the surgical team and patient were blinded as to which breast received the study drug. Postoperative complications, including hematoma, within 30 days of surgery, drain outputs, and duration of drain use, were compared between treatment and placebo breasts. RESULTS: The overall hematoma rate was 1.5%. There was no significant association between application of TXA and development of a hematoma (p=0.56) or other complications. The hematoma rate of patients enrolled in the trial was similar to the overall rate of hematoma during the study time period (1.5% versus 2.4%, p=0.511). In a multivariate model, TXA was not significantly associated with differences in drain output after controlling for resection weight, age, and duration of drain use (p=0.799). No adverse effects or thromboembolic events from TXA were observed. CONCLUSION: Topical application of TXA does not decrease the incidence of hematoma following reduction mammoplasty.

Genetic patterning for child psychopathology is distinct from that for adults and implicates fetal cerebellar development.

Childhood psychiatric symptoms are often diffuse but can coalesce into discrete mental illnesses during late adolescence. We leveraged polygenic scores (PGSs) to parse genomic risk for childhood symptoms and to uncover related neurodevelopmental mechanisms with transcriptomic and neuroimaging data. In independent samples (Adolescent Brain Cognitive Development, Generation R) a narrow cross-disorder neurodevelopmental PGS, reflecting risk for attention deficit hyperactivity disorder, autism, depression and Tourette syndrome, predicted psychiatric symptoms through early adolescence with greater sensitivity than broad cross-disorder PGSs reflecting shared risk across eight psychiatric disorders, the disorder-specific PGS individually or two other narrow cross-disorder (Compulsive, Mood-Psychotic) scores. Neurodevelopmental PGS-associated genes were preferentially expressed in the cerebellum, where their expression peaked prenatally. Further, lower gray matter volumes in cerebellum and functionally coupled cortical regions associated with psychiatric symptoms in mid-childhood. These findings demonstrate that the genetic underpinnings of pediatric psychiatric symptoms differ from those of adult illness, and implicate fetal cerebellar developmental processes that endure through childhood.

The Impact of Alar Flare Reduction Goes Beyond Just the Ala.

BACKGROUND: Alar flare reduction (AFR) is a widely used technique in rhinoplasty. Although the impact of AFR on the alar base has been well studied, its effect on the surrounding tissues is largely unknown. This study aims to elucidate the potential effect of AFR on the overall nasal and perinasal anatomy. METHODS: AFR was performed on cadavers ( n = 7) with sequential crescent-shaped alar excisions of 2, 4, and 6 mm. Two- and three-dimensional photographs were obtained at baseline and subsequent intervals. Analysis was performed with Adobe Photoshop and Vectra. Standardized landmarks were placed at the nasal tip point (NTP) and alar base point to quantify NTP vector distances, NTP surface distances, and alar crease angle. RESULTS: The surface and vector distances between the NTP and alar base point decreased for increasing AFR intervals. AFR created a surface decrease of 1.90 ± 1.60, 3.54 ± 1.85, and 4.91 ± 1.89 mm, respectively. AFR created a vector decrease of 1.50 ± 1.14, 2.83 ± 1.37, and 3.97 ± 1.38 mm, respectively. NTP projection decreased by 0.54 ± 0.31 mm for 6-mm excision. AFR led to cheek elevation of 0.87 ± 0.70, 1.25 ± 0.60, and 1.96 ± 0.48 mm, respectively. This alar crease elevation blunted the transition between the cheek and upper lip skin at the level of the alar rim with the angle of this transition increasing 26.62 ± 12.78 degrees from baseline to 6 mm. CONCLUSIONS: Three-dimensional analysis demonstrates the influence of AFR on the alar base and surrounding perinasal contour. AFR results in nasal tip deprojection, alar crease elevation, and alar flare width narrowing. Further investigation into the impact of modifying the alar base on surrounding structures is warranted.

Mild Paravalvular Leak May Pose an Increased Thrombogenic Risk in Transcatheter Aortic Valve Replacement (TAVR) Patients-Insights from Patient Specific In Vitro and In Silico Studies.

In recent years, the treatment of aortic stenosis with TAVR has rapidly expanded to younger and lower-risk patients. However, persistent thrombotic events such as stroke and valve thrombosis expose recipients to severe clinical complications that hamper TAVR's rapid advance. We presented a novel methodology for establishing a link between commonly acceptable mild paravalvular leak (PVL) levels through the device and increased thrombogenic risk. It utilizes in vitro patient-specific TAVR 3D-printed replicas evaluated for hydrodynamic performance. High-resolution µCT scans are used to reconstruct in silico FSI models of these replicas, in which multiple platelet trajectories are studied through the PVL channels to quantify thrombogenicity, showing that those are highly dependent on patient-specific flow conditions within the PVL channels. It demonstrates that platelets have the potential to enter the PVL channels multiple times over successive cardiac cycles, increasing the thrombogenic risk. This cannot be reliably approximated by standard hemodynamic parameters. It highlights the shortcomings of subjectively ranked PVL commonly used in clinical practice by indicating an increased thrombogenic risk in patient cases otherwise classified as mild PVL. It reiterates the need for more rigorous clinical evaluation for properly diagnosing thrombogenic risk in TAVR patients.

Virtual Surgical Planning and Three-Dimensional Printing in Rhinoplasty.

Recent developments in three-dimensional (3D) imaging technology offer a more comprehensive means of assessing facial features. 3D printing allows for the transition of planning from simply a preoperative tool to an intraoperative device with the use of tools such as 3D-printed cutting guides, marking guides, or positioning guides. With the advent of 3D printing technology, 3D surface images can now be used to generate new medical models, devices, or tools to assist with rhinoplasty during preoperative, intraoperative, and postoperative phases. In the field of rhinoplasty, 3D printing can be applied in three main areas: (1) reference models, (2) surgical guides, and (3) nasal splints. The value of 3D imaging extends far beyond the benefits of "conversion" during a preoperative consultation and has the potential to greatly enhance the overall treatment of rhinoplasty patients with enhanced communication and personalized devices that can be used during surgery and in the postoperative phase.

Three-Dimensional Perioral Assessment Following Subnasal Lip Lift.

BACKGROUND: The subnasal lip lift is a surgical technique that elevates the "lip line" (interface between vertical maxillary incisor height and upper lip) to achieve a more youthful aesthetic. OBJECTIVES: The authors sought to offer the first ever definition, to their knowledge, of 3-dimensional (3D) changes to the upper lip due to subnasal lip lift. METHODS: A lip lift procedure was performed (on cadaveric samples) in a sequential manner from 2.5- to 5.0-mm intervals (n = 13). 3D photographs were taken with the VECTRA H1 system (Canfield Scientific, Fairfield, NJ), and 3D analysis was performed including vermillion height and width, philtral height, sagittal lip projection, vermillion surface area, and incisor show. A subset of samples (n = 9) underwent a modification of the technique by undermining the upper lip subcutaneous tissue off the underlying muscular fascia. RESULTS: Vermillion surface area (baseline range, 1.45-5.52 cm2) increased by an average of 20.5% and 43.1% with 2.5-mm and 5.0-mm lip lift, respectively. Anterior projection of the vermillion increased in all cases by an average of 2.13 and 4.07 mm at 2.5 and 5.0 mm, respectively. Philtral height decreased in all cases by an average of 3.37 and 7.23 mm at 2.5 and 5.0 mm, whereas incisal show increased on average of 1.9 and 4.09 mm, respectively. CONCLUSIONS: This study is the first to our knowledge to define the 3D morphometric changes to the upper lip following subnasal lip lift. Quantifying these changes aids the surgeon in preoperative planning and guiding patient expectations.

Visions of TAVR Future: Development and Optimization of a Second Generation Novel Polymeric TAVR.

Tissue-based transcatheter aortic valve (AV) replacement (TAVR) devices have been a breakthrough approach for treating aortic valve stenosis. However, with the expansion of TAVR to younger and lower risk patients, issues of long-term durability and thrombosis persist. Recent advances in polymeric valve technology facilitate designing more durable valves with minimal in vivo adverse reactions. We introduce our second-generation polymeric transcatheter aortic valve (TAV) device, designed and optimized to address these issues. We present the optimization process of the device, wherein each aspect of device deployment and functionality was optimized for performance, including unique considerations of polymeric technologies for reducing the volume of the polymer material for lower crimped delivery profiles. The stent frame was optimized to generate larger radial forces with lower material volumes, securing robust deployment and anchoring. The leaflet shape, combined with varying leaflets thickness, was optimized for reducing the flexural cyclic stresses and the valve's hydrodynamics. Our first-generation polymeric device already demonstrated that its hydrodynamic performance meets and exceeds tissue devices for both ISO standard and patient-specific in vitro scenarios. The valve already reached 900 × 106 cycles of accelerated durability testing, equivalent to over 20 years in a patient. The optimization framework and technology led to the second generation of polymeric TAV design- currently undergoing in vitro hydrodynamic testing and following in vivo animal trials. As TAVR use is rapidly expanding, our rigorous bio-engineering optimization methodology and advanced polymer technology serve to establish polymeric TAV technology as a viable alternative to the challenges facing existing tissue-based TAV technology.

Robust immune responses to SARS-CoV-2 in a pediatric patient with B-Cell ALL receiving tisagenlecleucel.

Recipients of anti-CD19 targeted therapies such as chimeric antigen receptor (CAR)-T cell are considered at high risk for complicated Severe Acute Respiratory Syndrome Coronavirus (SARS-CoV-2) infection due to prolonged B cell aplasia and immunosuppression. These patients represent a unique cohort and so far, immune responses to SARS-CoV-2 have not been well characterized in this setting. We report a pediatric patient with B-cell acute lymphoblastic leukemia (B-ALL) who had asymptomatic SARS-CoV-2 infection while receiving blinatumomab, followed by lymphodepletion (LD) and tisagenlecleucel, a CD19 targeting CAR-T therapy. The patient had a complete response to tisagenlecleucel, did not develop cytokine release syndrome, or worsening of SARS-CoV-2 during therapy. The patient had evidence of ongoing persistence of IgG antibody responses to spike and nucleocapsid after LD followed by tisagenlecleucel despite the B-cell aplasia. Further we were able to detect SARS-CoV-2 specific T-cells recognizing multiple viral structural proteins for several months following CAR-T. The T-cell response was polyfunctional and predominantly CD4 restricted. This data has important implications for the understanding of SARS-CoV-2 immunity in patients with impaired immune systems and the potential application of SARS-CoV-2-specific T-cell therapeutics to treat patients with blood cancers who receive B cell depleting therapy.

Intraoperative Navigation in Plastic Surgery with Augmented Reality: A Preclinical Validation Study.

BACKGROUND: Augmented reality allows users to visualize and interact with digital images including three-dimensional holograms in the real world. This technology may have value intraoperatively by improving surgical decision-making and precision but relies on the ability to accurately align a hologram to a patient. This study aims to quantify the accuracy with which a hologram of soft tissue can be aligned to a patient and used to guide intervention. METHODS: A mannequin's face was marked in a standardized fashion with 14 incision patterns in red and nine reference points in blue. A three-dimensional photograph was then taken, converted into a hologram, and uploaded to HoloLens (Verto Studio LLC, San Diego, Calif.), a wearable augmented reality device. The red markings were then erased, leaving only the blue points. The hologram was then viewed through the HoloLens in augmented reality and aligned onto the mannequin. The user then traced the overlaid red markings present on the hologram. Three-dimensional photographs of the newly marked mannequin were then taken and compared with the baseline three-dimensional photographs of the mannequin for accuracy of the red markings. This process was repeated for 15 trials (n = 15). RESULTS: The accuracy of the augmented reality-guided intervention, when considering all trials, was 1.35 ± 0.24 mm. Markings that were positioned laterally on the face were significantly more difficult to reproduce than those centered around the facial midline. CONCLUSIONS: Holographic markings can be accurately translated onto a mannequin with an average error of less than 1.4 mm. These data support the notion that augmented reality navigation may be practical and reliable for clinical integration in plastic surgery.

3D Printed Surgical Guides Applied in Rhinoplasty to Help Obtain Ideal Nasal Profile.

INTRODUCTION: As computer simulation for rhinoplasty continues to rise, the technology's utility extends beyond increasing patient conversion. Virtual simulation of the surgical result can assist with surgical planning and intraoperative decision-making. 3D printed anatomic models or surgical guides based on 3D images may help align surgeons with their original surgical plan. This study aims to evaluate the utility of 3D printed surgical guides as an intraoperative tool to help establish dorsal height and tip position. METHODS: Patients undergoing rhinoplasty had preoperative virtual 3D surgical simulations performed. Simulations were used to create a 3D printed nasal kits containing ceramic models of the preoperative nose and simulated nose, sagittal contour guide, and customized postoperative nasal splint. Nasal guides were sterilized for continual intraoperative assessment of profile contour (i.e., dorsal height and tip position). Postoperative 3D images (1-3 months post-op) were then compared to preoperative simulations. The difference between z coordinates and y coordinates determined the difference in projection and rotation, respectively. RESULTS: Fifteen patients met inclusion criteria for this study. With the use of 3D printed surgical guides, the final tip position was on average of 0.8±0.7mm from simulated projection and 0.3±0.2mm from simulated rotation. Similarly, projection for the cartilaginous and bony dorsum was within 1.0±0.8 and 0.8±0.7mm of the simulation, respectively. CONCLUSION: Virtual simulation is useful in defining aesthetic goals preoperatively, but the potential clinical value extends beyond this. 3D printed rhinoplasty guides extend the simulation's utility to decision-making intraoperatively. This technology offers a novel medium for anatomic reference, which may improve adherence to desired aesthetic goals. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine Ratings, please refer to Table of Contents or online Instructions to Authors www.springer.com/00266 .