Evaluation of thermal conductivity models and dielectric properties in metal oxide-filled poly(butylene succinate-co-adipate) composites.

This study examines how various nanofillers impact thermal conductivity, dielectric characteristics, and electromagnetic interference (EMI) shielding potential of bio-based and biodegradable poly(butylene succinate-co-adipate) (PBSA). TiO2, NiFe2O4, Fe2O3, and Fe3O4 were selected as fillers for nanocomposites at 4-50 vol.% (12-81 wt.%). The nanocomposites were analyzed in three domains: structural (scanning electron microscopy, energy dispersive X-ray spectroscopy mapping, density, tensile testing), thermal (light flash analysis, literature models), and dielectric (AC conductivity, permittivity, EM shielding effectiveness (SE)). The investigated fillers showed good dispersion and compatibility with the PBSA matrix. LFA was analyzed according to literature models, where Bruggeman and Agari models showed the best fit at high concentrations. The dielectric analysis revealed that most of the nanocomposites did not reach percolation; thus, producing thermally conductive plastics that are electrically insulating. EMI shielding was limited to frequencies below 10 Hz, with the notable exception of Fe3O4 (100 nm and loading of > 25 vol.%), which showed shielding at frequencies up to 105 Hz. The investigated composites based on a biodegradable polyester and abundant metal oxide nanofillers are suitable for the production of cheap, ecological, and electrically insulating heat dissipation solutions required for modern and lightweight applications.

Biodegradable Poly(butylene succinate) Laminate with Nanocellulose Interphase Layer for High-Barrier Packaging Film Application.

In response to rising concerns over the environmental and human health ramifications of polymers derived from petroleum, particularly in the food packaging industry, research has pivoted towards more sustainable materials. Poly(butylene succinate) (PBS), selected as the polymer matrix, stands out as one of the most promising bio-based and biodegradable polymers suitable for film blowing and lamination. A layered spray-coating technique was employed to apply 1, 5, 10, and 20 layers of nanofibrillated cellulose (NFC) between blown PBS films, creating a three-layer laminate structure. NFC sourced from minimally processed hemp stalk waste highlights the potential for minimizing environmental impact. The water vapor transmission rate (WVTR) of these films, a critical parameter for food packaging, was assessed in a controlled environment at 38 °C and 90% relative humidity over a period of two months. The integration of a single NFC layer, constituting 0.35% of the composite's weight, was observed to significantly reduce the WVTR by up to 5.5-fold. It was noted that higher NFC layer counts above 10 reduced the adhesion within the laminate layers. Morphological assessments showed that the number of structural defects increased with a higher count of NFC layers. As the count of NFC layers increased, the optical transparency of the laminates dropped from approximately 65% to 25% in the visible light spectrum. Notably, by weight percent, NFC proved to be an effective barrier even without chemical modification. The developed laminates stand out as a viable, green option for food packaging, offering a sustainable and renewable solution.