Conductive organic electrodes for flexible electronic devices.

The paper reports on a novel process flow to manufacture conductive organic electrodes from highly conductive doped PEDOT:PSS polymer films that can be patterned and display a good adhesion to oxidized Si wafers as well as to flexible substrates, such as Mylar. Among other results, it is shown that multiple depositions of PEDOT:PSS increase the electrical conductivity by more than two orders of magnitude without increasing the film thickness of PEDOT:PSS significantly. An exponential dependence between sheet resistance and the number of PEDOT:PSS coatings has been found. The electrical conductivity of PEDOT:PSS can be increased by another two orders of magnitude doping with Cu nanoparticles when coated on the surface of a soft-baked PEDOT:PSS film. It is found, however, that both kinds of conductivity enhancement are not additive. Adhesion of PEDOT:PSS to oxidized Si wafers and BoPET (Mylar) has been ensured by applying an oxygen plasma cleaning step before spin coating. The manufactured high-conductivity PEDOT:PSS film can be patterned using a sacrificial metal layer with subsequent etching of PEDOT:PSS in oxygen plasma, followed by the removal of the patterned segments of the sacrificial metal layer in an aqueous acid solution.

Electron tunneling between vibrating atoms in a copper nano-filament.

Nanowires, atomic point contacts, and chains of atoms are one-dimensional nanostructures, which display size-dependent quantum effects in electrical and thermal conductivity. In this work a Cu nanofilament of a defined resistance and formed between a Cu and Pt electrode is heated remotely in a controlled way. Depending on the robustness of the conductive filament and the amount of heat transferred several resistance-changing effects are observed. In case of sufficiently fragile nanofilament exhibiting electrical quantum conductance effects and moderate heating applied to it, a dramatic increase of resistance is observed just after the completion of the heating cycle. However, when the filament is allowed to cool off, a spontaneous restoration of the originally set resistance of the filament is observed within less than couple tens of seconds. When the filament is sufficiently fragile or the heating too excessive, the filament is permanently ruptured, resulting in a high resistance of the cell. In contrast, for robust, low resistance filaments, the remote heating does not affect the resistance. The spontaneous restoration of the initial resistance value is explained by electron tunneling between neighboring vibrating Cu atoms. As the vibrations of the Cu atoms subside during the cooling off period, the electron tunneling between the Cu atoms becomes more likely. At elevated temperatures, the average tunneling distance increases, leading to a sharp decrease of the tunneling probability and, consequently, to a sharp increase in transient resistance.

Observation of Quantized and Partial Quantized Conductance in Polymer-Suspended Graphene Nanoplatelets.

Quantized conductance is observed at zero magnetic field and room temperature in metal-insulator-metal structures with graphene submicron-sized nanoplatelets embedded in a 3-hexylthiophene (P3HT) polymer layer. In devices with medium concentration of graphene platelets, integer multiples of G o = 2e (2)/h (=12.91 kΩ(-1)), and in some devices partially quantized including a series of with (n/7) × G o, steps are observed. Such an organic memory device exhibits reliable memory operation with an on/off ratio of more than 10. We attribute the quantized conductance to the existence of a 1-D electron waveguide along the conductive path. The partial quantized conductance results likely from imperfect transmission coefficient due to impedance mismatch of the first waveguide modes.