3D electrode configurations for spectral induced polarization surveys of landfills.

There is growing interest in the use of spectral induced polarization (SIP) surveys to characterize the near-surface environment. Few attempts have been made to perform field SIP surveys in a 3D configuration; when done, they are typically conducted using a series of parallel 2D electrode lines with collinear measurements. However, such measurements are limited in the resolution between the lines which is critical in the case of heterogeneous subsurface conditions, such as in landfills. To overcome this, we investigate here the enhanced resolution in SIP measurements through true 3D measurements, i.e., the resolving capabilities of different electrode configurations distributed across measuring planes. First, we investigate, through a synthetic study, the difference between results from using 2D parallel collinear electrode arrays and true 3D configurations. Second, we collected SIP data (in the frequency range between 1 and 240 Hz) using 2D and 3D configurations in two landfills to evaluate the application of our results in real field conditions. Both the synthetic and the field experiments demonstrate that measurements of parallel 2D collinear arrays result in the creation of artifacts and the loss of resolution in the 3D structure, especially of polarizable features. In contrast, the 3D configurations are able to resolve polarizable anomalies in synthetic and field measurements, resulting in a better delineation of the geometry of waste units. Our results also demonstrate that 3D configurations are better suited to recover the frequency-dependence of the electrical properties; thus, permitting an improved interpretation of waste composition and the quantification of waste volume.

Noninvasive characterization of the Trecate (Italy) crude-oil contaminated site: links between contamination and geophysical signals.

The characterization of contaminated sites can benefit from the supplementation of direct investigations with a set of less invasive and more extensive measurements. A combination of geophysical methods and direct push techniques for contaminated land characterization has been proposed within the EU FP7 project ModelPROBE and the affiliated project SoilCAM. In this paper, we present results of the investigations conducted at the Trecate field site (NW Italy), which was affected in 1994 by crude oil contamination. The less invasive investigations include ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI) surveys, together with direct push sampling and soil electrical conductivity (EC) logs. Many of the geophysical measurements were conducted in time-lapse mode in order to separate static and dynamic signals, the latter being linked to strong seasonal changes in water table elevations. The main challenge was to extract significant geophysical signals linked to contamination from the mix of geological and hydrological signals present at the site. The most significant aspects of this characterization are: (a) the geometrical link between the distribution of contamination and the site's heterogeneity, with particular regard to the presence of less permeable layers, as evidenced by the extensive surface geophysical measurements; and (b) the link between contamination and specific geophysical signals, particularly evident from cross-hole measurements. The extensive work conducted at the Trecate site shows how a combination of direct (e.g., chemical) and indirect (e.g., geophysical) investigations can lead to a comprehensive and solid understanding of a contaminated site's mechanisms.