Aqueous Asymmetric 1,4-Addition of Arylboronic Acids to Enones Catalyzed by an Amphiphilic Resin-Supported Chiral Diene Rhodium Complex under Batch and Continuous-Flow Conditions.

A rhodium-chiral diene complex immobilized on amphiphilic polystyrene-poly(ethylene glycol) (PS-PEG) resin (PS-PEG-diene*-Rh) has been developed. The immobilized rhodium-chiral diene complex (PS-PEG-diene*-Rh) efficiently catalyzed the asymmetric 1,4-addition of various arylboronic acids to cyclic or linear enones in water under batch conditions to give the corresponding ß-arylated carbonyl compounds in excellent yields and with excellent enantioselectivity. The catalyst was readily recovered by simple filtration and reused 10 times without loss of its catalytic activity and enantioselectivity. Moreover, a continuous-flow asymmetric 1,4-addition in a flow reactor containing PS-PEG-diene*-Rh proceeded efficiently at 50 °C with retention of high enantioselectivity. Long-term continuous-flow asymmetric 1,4-addition during 12 h readily gave the desired product on a 10 g scale with high enantioselectivity.

Enantioposition-selective copper-catalyzed azide-alkyne cycloaddition for construction of chiral biaryl derivatives.

A highly enantioposition-selective copper-catalyzed azide-alkyne cycloaddition (CuAAC) of dialkynes bearing prochiral biaryls has been developed for the construction of 1,2,3-triazoles bearing axially chiral biaryl groups in up to 76% yield and up to 99% ee.

Use of dimethyl carbonate as a solvent greatly enhances the biaryl coupling of aryl iodides and organoboron reagents without adding any transition metal catalysts.

The coupling reaction of aryl iodides with arylboronic acids to give biaryl compounds can be efficiently performed without adding a transition metal catalyst. The key to success is the use of dimethyl carbonate as a solvent. This finding provides a new strategy for constructing a biaryl linkage.

Enantioselective carbenoid insertion into phenolic O-H bonds with a chiral copper(I) imidazoindolephosphine complex.

The enantioselective O-H carbenoid insertion reaction with a new chiral copper(I) imidazoindolephosphine complex has been developed. The chiral copper(I) complex catalyzed the insertion of carbenoids derived from α-diazopropionates into the O-H bonds of various phenol derivatives to give the corresponding α-aryloxypropionates with up to 91% ee.

Intramolecular arene hydroxylation versus intermolecular olefin epoxidation by (mu-eta2:eta2-peroxo)dicopper(II) complex supported by dinucleating ligand.

A discrete (mu-eta2:eta2-peroxo)Cu(II)2 complex, [Cu2(O2)(H-L)]2+, is capable of performing not only intramolecular hydroxylation of a m-xylyl linker of a dinucleating ligand but also intermolecular epoxidation of styrene via electrophilic reaction to the C=C bond and hydroxylation of THF by H-atom abstraction.

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands.

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe

Kinetics and DFT studies on the reaction of copper(II) complexes and H2O2.

Copper(II) complexes supported by bulky tridentate ligands L1(H) (N,N-bis(2-quinolylmethyl)-2-phenylethylamine) and L1(Ph) (N,N-bis(2-quinolylmethyl)-2,2-diphenylethylamine) have been prepared and their crystal structures as well as some physicochemical properties have been explored. Each complex exhibits a square pyramidal structure containing a coordinated solvent molecule at an equatorial position and a weakly coordinated counter anion (or water) at an axial position. The copper(II) complexes reacted readily with H(2)O(2) at a low temperature to give mononuclear hydroperoxo copper(II) complexes. Kinetics and DFT studies have suggested that, in the initial stage of the reaction, deprotonated hydrogen peroxide attacks the cupric ion, presumably at the axial position, to give a hydroperoxo copper(II) complex retaining the coordinated solvent molecule (H(R).S). H(R).S then loses the solvent to give a tetragonal copper(II)-hydroperoxo complex (H(R)), in which the -OOH group may occupy an equatorial position. The copper(II)-hydroperoxo complex H(R) exhibits a relatively high O-O bond stretching vibration at 900 cm(-1) compared to other previously reported examples.

Carbon-halogen bond activation mechanism by copper(I) complexes of (2-pyridyl)alkylamine ligands.

The reaction of p-substituted benzyl halides ((Y)BnX; X = Cl, Br, and I; Y = p-substituent, OMe, t-Bu, Me, H, F, Cl, and NO(2)) and copper(I) complexes supported by a series of (2-pyridyl)alkylamine ligands has been investigated to shed light on the mechanism of copper(I) complex mediated carbon-halogen bond activation, including ligand effects on the redox reactivity of copper(I) complexes which are relevant to the chemistry. For both the tridentate ligand (Phe)L(Pym2) [N,N-bis(2-pyridylmethyl)-2-phenylethylamine] and tetradentate ligand TMPA [tris(2-pyridylmethyl)amine] complexes, the C-C coupling reaction of benzyl halides proceeded smoothly to give corresponding 1,2-diphenylethane derivatives and copper(II)-halide complex products. Kinetic analysis revealed that the reaction obeys second-order kinetics both on the copper complex and the substrate; rate = k[Cu](2)[(Y)BnX](2). A reaction mechanism involving a dinuclear copper(III)-halide organometallic intermediate is proposed, on the basis of the kinetic results, including observed electronic effects of p-substituents (Hammett plot) and the rate dependence on the BDE (bond dissociation energy) of the C-X bond, as well as the ligand effects.

C-S bond formation reaction between a phenolate and disulfide-bridged dicopper(I) complexes.

A novel C-S bond formation reaction took place, when a lithium phenolate derivative was treated with a disulfide-bridged dicopper(I) complex or a bis(micro-thiolato)dicopper(II) complex under very mild conditions. The reaction has been suggested to proceed via a disulfide-bridged (micro-phenoxo)dicopper(I) complex as the common reaction intermediate. Copper(II) complexes of the modified ligands containing a thioether group (products of the C-S bond formation reaction) have been isolated and structurally characterized by X-ray analysis as model compounds of the active site of galactose oxidase. Mechanism of the C-S bond formation reaction is also discussed in relation to the biosynthetic mechanism of the organic cofactor Tyr-Cys of galactose oxidase.

Dinuclear copper-dioxygen intermediates supported by polyamine ligands.

Reactivity of the dicopper(I) and dicopper(II) complexes supported by novel polyamine ligands L1 (1,11-bis(6-methylpyridin-2-yl)-2,6,10-triaza-2,6,10-tribenzylundecane) and L2 (5-benzyl-1,9-bis(6-methylpyridin-2-yl)-2,8-bis(6-methylpyridin-2-ylmethyl)-2,5,8-triazanonane) towards O(2) and H(2)O(2), respectively, has been investigated in order to shed light on the ligand effects on Cu(2)/O(2) chemistry. The dicopper(I) complex of L1 (1a) readily reacted with O(2) in a 2:1 ratio at a low temperature (-94 degrees C) in acetone to afford a mixture of (mu-eta2.eta2-peroxo)dicopper(II) and bis(mu-oxo)dicopper(III) complexes. The formation of these species has been confirmed by the electron spin resonance (ESR) silence of the solution as well as their characteristic absorption bands in the UV-visible region (gammamax= 350 and 510 nm due to the peroxo complex and approximately 400 nm due to the bis(mu-oxo) complex] and the resonance Raman bands at 729 cm(-1) [Deltanu (16(O2)-18(O2)) = 38 cm(-1)] due to the peroxo complex and at 611 and 571 cm(-1) [Deltanu(16(O2)-18(O2)) = 22 and 7 cm(-1), respectively] due to the bis(mu-oxo) complex. The peroxo and bis(mu-oxo) complexes were unstable even at the low temperature, leading to oxidative N-dealkylation at the ligand framework. The dicopper(I) complex of L2 (2a) also reacted with O(2) to give (mu-hydroxo)dicopper(II) complex (2b(OH)) as the product. In this case, however, no active oxygen intermediate was detected even at the low temperature (-94 degrees C). With respect to the copper(II) complexes, treatment of the (mu-hydroxo)dicopper(II) complex of L1 (1b(OH)) with an equimolar amount of H(2)O(2) in acetone at -80 degrees C efficiently gave a (mu-1,1-hydroperoxo)dicopper(II) complex, the formation of which has been supported by its ESR-silence as well as UV-vis (370 and 650 nm) and resonance Raman spectra [881 cm(-1); [Deltanu (16(O2)-18(O2)) = 49 cm(-1)]. The (mu-1,1-hydroperoxo)dicopper(II) intermediate of L1 also decomposed slowly at the low temperature to give similar oxidative N-dealkylation products. Kinetic studies on the oxidative N-dealkylation reactions have been performed to provide insight into the reactivity of the active oxygen intermediates.

Quantitative evaluation of d-pi interaction in copper(I) complexes and control of copper(I)-dioxygen reactivity.

Crystal structures of the copper(I) complexes 1(X), 2, and 3 of a series of tridentate ligands L1(X), L2, and L3, respectively (L1(X): p-substituted derivatives of N,N-bis[2-(2-pyridyl)ethyl]-2-phenylethylamine; X=H, Me, OMe, Cl, NO(2); L2: N,N-bis[2-(2-pyridyl)ethyl]-2-methyl-2-phenylethylamine; L3: N,N-bis[2-(2-pyridyl)ethyl]-2,2-diphenylethylamine) were solved to demonstrate that all the copper(I) complexes involve an eta(2) copper-arene interaction with the phenyl ring of the ligand sidearm. The Cu(I) ion in each complex has a distorted tetrahedral geometry consisting of the three nitrogen atoms (one tertiary amine nitrogen atom and two pyridine nitrogen atoms) and C(1)-C(2) of the phenyl ring of ligand sidearm, whereby the Cu-C distances of the copper-arene interaction significantly depend on the para substituents. The existence of the copper-arene interaction in a nonpolar organic solvent (CH(2)Cl(2)) was demonstrated by the observation of an intense MLCT band around 290 nm, and the magnitude of the interaction was evaluated by detailed analysis of the (1)H and (13)C NMR spectra and the redox potentials E(1/2) of the copper ion, as well as by means of the ligand-exchange reaction between the phenyl ring and CH(3)CN as an external ligand. The thermodynamic parameters DeltaH(o) and DeltaS(o) for the ligand-exchange reaction with CH(3)CN afforded a quantitative measure for the energy difference of the copper-arene interaction in the series of copper(I) complexes. Density functional studies indicated that the copper(I)-arene interaction mainly consists of the interaction between the d(z(2) ) orbital of Cu(I) and a pi orbital of the phenyl ring. The copper(I) complexes 1(X) reacted with O(2) at -80 degrees C in CH(2)Cl(2) to give the corresponding (micro-eta(2):eta(2)-peroxo)dicopper(II) complexes 4, the formation rates k(obs) of which were significantly retarded by stronger d-pi interaction, while complexes 2 and 3, which exhibit the strongest d-pi interaction showed significantly lower reactivity toward O(2) under the same experimental conditions. Thus, the d-pi interaction has been demonstrated for the first time to affect the copper(I)-dioxygen reactivity, and represents a new aspect of ligand effects in copper(I)-dioxygen chemistry.

Structures and redox reactivities of copper complexes of (2-pyridyl)alkylamine ligands. Effects of the alkyl linker chain length.

Ligand effects on the structures and redox reactivities of copper complexes have been examined using (2-pyridyl)alkylamine derivatives as the supporting ligands, where particular attention has been focused on the effects of the alkyl linker chain length connecting the tertiary amine nitrogen atom and the pyridine nucleus: N[bond]CH(2)[bond]Py (Pym) vs N[bond]CH(2)CH(2)[bond]Py (Pye). X-ray crystallographic analysis of the copper(I) complex of tridentate ligand (Phe)L(Pym2) [N,N-di(2-pyridylmethyl)-2-phenylethylamine] (complex 1) has demonstrated that it possesses a trigonal pyramidal geometry in which a d[bond]pi interaction with an eta(1)-binding mode exists between the metal ion and one of the ortho carbons of the phenyl ring of the ligand side arm (phenethyl). The result shows sharp contrast to the d[bond]pi interaction with an eta(2)-binding mode existing in the copper(I) complex of (Phe)L(Pye2) [N,N-di[2-(2-pyridyl)ethyl]-2-phenethylamine] (complex 2). Such a d-pi interaction has been shown to affect the stability of the copper(I) complex in CH(2)Cl(2). Oxygenation of copper(I) complex 1 supported by (Phe)L(Pym2) produces a bis(mu-oxo)dicopper(III) complex, also being in sharp contrast to the case of the copper(I) complex 2 with ligand (Phe)L(Pye2), which preferentially affords a (micro-eta(2):eta(2)-peroxo)dicopper(II) complex in the reaction with O(2). Such an effect of the alkyl linker chain length of the metal binding site has also been found to operate in the RSSR (disulfide)/2RS(-) (thiolate) redox system. Namely, ligand (S2,R)L(Pym1) (di[2-[(alkyl)(2-pyridinylmethyl)amino]ethyl] disulfide) with the methylene linker group (Pym) induced the reductive disulfide bond cleavage in the reaction with copper(I) ion to give a bis(micro-thiolato)dicopper(II) complex, while the ligand with the ethylene linker group (Pye), (S2,Bn)L(Pye1) (di[2-[(benzyl)(2-(2-pyridinyl)ethyl)amino]ethyl] disulfide), gave a disulfide-dicopper(I) complex. These ligand effects in the Cu(2)[bond]O(2) and Cu(2)[bond]S(2) systems have been discussed by taking into account the difference in electron-donor ability of the pyridine nucleus between the Pym and Pye ligand systems.

Oxidation mechanism of phenols by dicopper-dioxygen (Cu(2)/O(2)) complexes.

The first systematic studies on the oxidation of neutral phenols (ArOH) by the mu-eta(2):eta(2)-peroxo)dicopper(II) complex (A) and the bis(mu-oxo)dicopper(III) complex (B) supported by the 2-(2-pyridyl)ethylamine tridentate and didentate ligands L(Py2) and L(Py1), respectively, have been carried out in order to get insight into the phenolic O-H bond activation mechanism by metal-oxo species. In both cases (A and B), the C-C coupling dimer was obtained as a solely isolable product in approximately 50% yield base on the dicopper-dioxygen (Cu(2)/O(2)) complexes, suggesting that both A and B act as electron-transfer oxidants for the phenol oxidation. The rate-dependence in the oxidation of phenols by the Cu(2)/O(2) complexes on the one-electron oxidation potentials of the phenol substrates as well as the kinetic deuterium isotope effects obtained using ArOD have indicated that the reaction involves a proton-coupled electron transfer (PCET) mechanism. The reactivity of phenols for net hydrogen atom transfer reactions to cumylperoxyl radical (C) has also been investigated to demonstrate that the rate-dependence of the reaction on the one-electron oxidation potentials of the phenols is significantly smaller than that of the reaction with the Cu(2)O(2) complexes, indicative of the direct hydrogen atom transfer mechanism (HAT). Thus, the results unambiguously confirmed that the oxidation of phenols by the Cu(2)O(2) complex proceeds via the PCET mechanism rather than the HAT mechanism involved in the cumylperoxyl radical system. The reactivity difference between A and B has also been discussed by taking account of the existed fast equilibrium between A and B.