Dummy molecularly imprinted polymer-based solid-phase extraction method for the determination of some phthalate monoesters in urine by gas chromatography-mass spectrometry analysis.

A dummy molecularly imprinted polymer-based solid-phase extraction (SPE) sorbent was used for the selective extraction of some phthalate monoesters, monoethyl phthalate (MEP), monobutyl phthalate (MnBP) and mono-(2-ethylhexyl) phthalate (MEHP) in urine prior to gas-chromatography-mass spectrometry (GC-MS) analysis. Diethyl phthalate (DEP), a phthalate ester, was successfully used as a dummy template to prepare selective sorbent for MEP, MnBP, and MEHP extraction. DEP-imprinted poly(ethylene glycol dimethacrylate N-methacryloyl-l-tryptophan methyl ester) (DPEMT) microbeads were synthesized by suspension polymerization and characterized by Fourier Transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and Brunauer Emmet Teller (BET) analysis. The critical parameters (i.e., pH, sorbent amount, ionic strength, sample volume, elution solvent) affecting the extraction performance of the DPEMT-SPE sorbent were optimized. Under optimum conditions, good linearities were obtained in the concentration range of 4 to 60 ng/mL with determination coefficients (R2) of greater than 0.9959. The developed SPE method provided low limits of detection (LOD) of 0.05-1.20 ng/mL and limits of quantification (LOQ) of 0.18-4.01 ng/mL with relative standard deviations (RSDs) of less than 8.95 % for intra- and inter-day analyses. The proposed SPE method was used to analyze phthalate monoesters in spiked urine samples, and recoveries of 97.45-109.26 % were obtained. DPEMT-SPE sorbent was reused for 15 times without any losses of performance. Consequently, a highly selective and sensitive SPE method based on a dummy molecularly imprinted polymer combined with GC-MS was successfully developed to monitor human phthalate exposure via urine samples.

A rational approach for 3D recognition and removal of L-asparagine via molecularly imprinted membranes.

In this study, a L-asparagine (L-Asn) imprinted membranes (L-Asn-MIPs) were synthesized via molecular imprinting for selective and efficient removal of L-Asn. The L-Asn-MIP membrane was prepared by using acrylamide (AAm) and hydroxyethyl methacrylate (HEMA) as a functional monomer and a comonomer, respectively. The membrane was characterized by scanning electron microscopy (SEM) and Fourier Transform infrared spectroscopy (FTIR). The L-Asn adsorption capacity of the membrane was investigated in detail. The maximum L-Asn adsorption capacity was determined as 408.2 mg/g at pH: 7.2, 24 °C. Determination of L-Asn binding behaviors of L-Asn-MIPs also shown with Scatchard analyses. The effect of pH on L-Asn adsorption onto the membrane and also the selectivity and reusability of the L-Asn-MIPs for L-Asn adsorption were determined through L-asparaginase (L-ASNase) enzyme activity measurements. The selectivity of the membrane was investigated by using two different ternary mixtures; L-glycine (L-Gly)/L-histidine (L-His)/L-Asn and L-tyrosin (L-Tyr)/L-cystein(L-Cys)/L-Asn. The obtained results showed that the L-Asn-MIP membranes have a high selectivity towards L-Asn.

L-(+)-Tryptophan methyl ester derived polymeric microbeads as an efficient heterogeneous catalyst for green synthesis of 2-amino-4-(nitromethyl)-4H-chromene-3-carbonitriles.

The cross-linked microbeads with average diameter of 106-300 µm, [poly(EGDMA-MATrp)], were obtained by copolymerization reaction of N-methacryloyl-L-(+)-tryptophan methyl ester (MATrp) with ethylene glycol dimethacrylate (EGDMA) and successfully applied as a heterogeneous catalyst in conjugate addition reaction of nitromethane to substituted 2-iminochromenes in aqueous media. A variety of 2-amino-4-(nitromethyl)-4H-chromene-3-carbonitriles has been synthesized in good yields. Polymeric microbeads were very durable and reused 5 times without a significant loss of activity. DFT calculations and experimental results revealed the significant role of π-π interactions as well as hydrogen bonding in the reaction mechanism.

Molecularly imprinted composite cryogel for extracorporeal removal of uric acid.

In this study, uric acid (UA)-imprinted poly (hydroxyethyl methacrylate-N-methacryloyl-amido-L-cysteine methyl ester)-Fe3+ [poly(HEMA-MAC)-Fe3+] nanoparticle-embedded poly(acrylamide-methyl methacrylate) cryogel [p(AAm-MMA)-MIP] was synthesized for selective UA adsorption. The nanoparticles were prepared via molecular imprinting. The prepared p(AAm-MMA)-MIP cryogel was characterized by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and swelling test. The swelling degree of the p(AAm-MMA)-MIP cryogel was determined as to 7.56 g H2O/g cryogel. The prepared cryogel was used for UA adsorption from aqueous solution.The effects of pH (4.0-8.0), initial UA concentration (5-40 mg/L), temperature (4 °C, 25 °C and 35 °C) and contact time on the UA adsorption capacity were detailedly investigated. UA adsorption data were applied to Langmuir and Freundlich isotherm models. The adsorption data were well fitted with pseudo-second order kinetic model. The thermodynamic parameters (ΔG ͦ, ΔH ͦ, ΔSo) demonstrated that the adsorption process was endothermic and spotaneous at 4 °C, 25 °C and 35 °C. The cryogel was also used for UA adsorption from human serum. The effects of the composite cryogel treatment on blood cells and hemostatic parameters were evaluated by using hemogram analyses, coagulation studies, thromboelastography and platelet aggregation studies. The results showed that the cryogel treatment has an allowable effect on blood cell counts and hemostatic parameters demonstrating the applicability of prepared composite cryogel for UA removal from human serum.

Application of affinity microspheres for effective SPE cleanup before the determination of sulfamerazine by HPLC.

This paper describes the application of poly (ethylene glycol dimethacrylate-N-methacryloyl-L-tryptophane methyl ester) [p(EGDMA-MATrp)] microspheres as an affinity sorbent for the SPE (solid phase extraction) cleanup of sulfamerazine (SMR) from food samples of animal origin before high performance liquid chromatography (HPLC) analysis. The microspheres were prepared by suspension polymerization of ethylene glycol dimethacrylate (EGDMA) and N-methacryloyl-L-tryptophane methyl ester (MATrp) as a crosslinker and a monomer, respectively. Various parameters affecting the SPE cleanup efficiency of the p(EGDMA-MATrp) microspheres (contact time, pH, initial SMR concentration, ionic strength etc.) were optimized. Under the optimized conditions, maximum adsorption capacity was found to be 8.55 ±â€¯0.44 mg/g sorbent at pH 5.0. 90% of the adsorbed SMR was desorbed by using ACN:MeOH (5:5) mixture as a desorption agent. Applicability of the microspheres for the SPE cleanup of SMR residues in the food samples such as egg and milk with HPLC was also determined. It was demonstrated that the prepared p(EGDMA-MATrp) microspheres could be repeatedly applied for SPE cleanup of sulfamerazine before chromatographic analysis. Also, the recoveries of SMR in milk and egg samples were reasonably satisfactory and in the range of 71 to 90%.

Dummy molecularly imprinted microbeads as solid-phase extraction material for selective determination of phthalate esters in water.

The aim of this study was to investigate the usability of newly synthesized dummy molecularly imprinted microbeads (DMIMs) as a solid phase extraction (SPE) material to determine six phthalate esters (PEs) in water by GC-MS analysis. Diethyl phthalate (DEP) was used as a dummy template to prepare poly(ethylene glycol dimethacrylate N-methacryloyl-l-tryptophan methyl ester) [PEMATrp)] DMIMs by using suspension polymerization. The PEMATrp DMIMs were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Firstly, the adsorption capacities of the DMIMs prepared in different template molecule (DEP) to functional monomer (MATrp) ratios were investigated by using DEP solutions in the concentration range of 1-500mg/L at pH 3.0. Styrene and vanillic acid were used to evaluate the selectivity of the prepared DMIMs towards the template molecule (DEP). Then, the best analytical conditions were investigated for the simultaneous determination of dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DBP), benzylbutyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DnOP) in aqueous media by using the PEMATrp DMIMs as SPE material. Validation experiments showed that the PEMATrp DMIMs-SPE method had good linearity at 12.5-250.0µg/L (0.988-0.999), good precision (1.2-5.9%), and limits of detection in a range of 0.31-0.41µg/L.

Adsorption of cinnabarinic acid from culture fluid with magnetic microbeads.

In this study, antimicrobial pigment cinnabarinic acid (CA) was produced from Pycnoporus cinnabarinus in laboratory-scale batch cultures. Magnetic poly(ethylene glycol dimethacrylate-N-methacryloyl-l-tryptophan methyl ester) [m-poly(EGDMA-MATrp)] beads (average diameter = 53-103 µm) were synthesized by copolymerizing of N-methacryloyl-l-tryptophan methyl ester (MATrp) with ethylene glycol dimethacrylate (EGDMA) in the presence of magnetite (Fe3O4) and used for the adsorption of CA. The m-poly(EGDMA-MATrp) beads were characterized by N2 adsorption/desorption isotherms (Brunauer Emmet Teller), X-ray photoelecron spectroscopy, scanning electron microscopy, infrared spectroscopy, thermal gravimetric analysis, electron spin resonance and swelling studies. The efficiency of m-poly(EGDMA-MATrp) beads for separation of CA from culture fluid was evaluated. The effects of pH, initial concentration, contact time and temperature on adsorption were analyzed. The maximum CA adsorption capacity of the m-poly(EGDMA-MATrp) beads was 272.9 mg g(-1) at pH 7.0, 25 °C. All the isotherm data can be fitted with the Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. The adsorption process obeyed pseudo-second-order kinetic model. Thermodynamic parameters ΔH = 5.056 kJ mol(-1), ΔS = 52.44 J K(-1) mol(-1) and ΔG = -9.424 kJ mol-(1) to -11.27 kJ mol-(1) with the rise in temperature from 4 to 40 °C indicated that the adsorption process was endothermic and spontaneous.

Magnetic vinylphenyl boronic acid microparticles for Cr(VI) adsorption: kinetic, isotherm and thermodynamic studies.

Magnetic vinylphenyl boronic acid microparticles, poly(ethylene glycol dimethacrylate(EG)-vinylphenyl boronic acid(VPBA)) [m-poly(EG-VPBA)], produced by suspension polymerization and characterized, was found to be an efficient solid polymer for Cr(VI) adsorption. The m-poly(EG-VPBA) microparticles were prepared by copolymerizing of ethylene glycol dimethylacrylate (EG) with 4-vinyl phenyl boronic acid (VPBA). The m-poly(EG-VPBA) microparticles were characterized by N2 adsorption/desorption isotherms, electron spin resonance (ESR), X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), elemental analysis, scanning electron microscope (SEM) and swelling studies. The m-poly(EG-VPBA) microparticles were used at adsorbent/Cr(VI) ion ratios. The influence of pH, Cr(VI) initial concentration, temperature of the removal process was investigated. The maximum removal of Cr(VI) was observed at pH 2. Langmuir isotherm and Dubinin-Radushkvich isotherm were found to better fit the experiment data rather than Fruendlich isotherm. The kinetics of the adsorption process of Cr(VI) on the m-poly(EG-VPBA) microparticles were investigated using the pseudo first-order, pseudo-second-order, Ritch-second-order and intraparticle diffusion models, results showed that the pseudo-second order equation model provided the best correlation with the experimental results. The thermodynamic parameters (free energy change, ΔG(0) enthalpy change, ΔH(0); and entropy change, ΔS(0)) for the adsorption have been evaluated.

Diethyl phthalate removal from aqueous phase using poly(EGDMA-MATrp) beads: kinetic, isothermal and thermodynamic studies.

In this study, poly(ethylene glycol dimethacrylate-N-methacryloyl-L-tryptophan methyl ester) [poly(EGDMA-MATrp)] beads (average diameter=106-300 µm), which were synthesized by co-polymerizing of N-methacryloyl-L-tryptophan methyl ester (MATrp) with ethylene glycol dimethacrylate (EGDMA), were used for diethyl phthalate (DEP) adsorption. The various factors affecting the adsorption of DEP from aqueous solutions such as pH, initial concentration, contact time and temperature were analysed. Adsorption behaviour of DEP on the poly(EGDMA-MATrp) beads was investigated by varying pH values of solution, contact time, initial concentration and temperature. An optimum adsorption capacity of 590.7 mg/g for DEP was obtained at 25 °C. The present adsorption process obeyed a pseudo-second-order kinetic model. All the isotherm data can be fitted with the Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Thermodynamic parameters ΔH=7.745 kJ/mol, ΔS=81.92 J/K/mol and ΔG=-16.69 kJ/mol to -18.31 kJ/mol with the rise in temperature from 25 °C to 45 °C indicated that the adsorption process was endothermic and spontaneous.

Microcontact imprinted surface plasmon resonance sensor for myoglobin detection.

In this study, we prepared surface plasmon resonance (SPR) sensor using the molecular imprinting technique for myoglobin detection in human serum. For this purpose, we synthesized myoglobin imprinted poly(hydroxyethyl methacrylate-N-methacryloyl-l-tryptophan methyl ester) [poly(HEMA-MATrp)] nanofilm on the surface of SPR sensor. We also synthesized non-imprinted poly(HEMA-MATrp) nanofilm without myoglobin for the control experiments. The SPR sensor was characterized with contact angle measurements, atomic force microscopy, X-ray photoelectron spectroscopy, and ellipsometry. We investigated the effectiveness of the sensor using the SPR system. We evaluated the ability of SPR sensor to sense myoglobin with myoglobin solutions (pH7.4, phosphate buffer) in different concentration range and in the serum taken from a patient with acute myocardial infarction. We found that the Langmuir adsorption model was the most suitable for the sensor system. The detection limit was 87.6 ng/mL. In order to show the selectivity of the SPR sensor, we investigated the competitive detection of myoglobin, lysozyme, cytochrome c and bovine serum albumin. The results showed that the SPR sensor has high selectivity and sensitivity for myoglobin.

Removal of diethyl phthalate from aqueous phase using magnetic poly(EGDMA-VP) beads.

The barium hexaferrite (BaFe(12)O(19)) containing magnetic poly(ethylene glycol dimethacrylate-vinyl pyridine), (mag-poly(EGDMA-VP)) beads (average diameter=53-212 µm) were synthesized and characterized. Their use as an adsorbent in the removal of diethyl phthalate (DEP) from an aqueous solution was investigated. The mag-poly(EGDMA-VP) beads were prepared by copolymerizing of 4-vinyl pyridine (VP) with ethylene glycol dimethacrylate (EGDMA). The mag-poly(EGDMA-VP) beads were characterized by N(2) adsorption/desorption isotherms (BET), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), elemental analysis, scanning electron microscope (SEM) and swelling studies. At a fixed solid/solution ratio, the various factors affecting the adsorption of DEP from aqueous solutions such as pH, initial concentration, contact time and temperature were analyzed. The maximum DEP adsorption capacity of the mag-poly(EGDMA-VP) beads was determined as 98.9 mg/g at pH 3.0, 25°C. All the isotherm data can be fitted with both the Langmuir and the Dubinin-Radushkevich isotherm models. The pseudo first-order, pseudo-second-order, Ritch-second-order and intraparticle diffusion models were used to describe the adsorption kinetics. The thermodynamic parameters obtained indicated the exothermic nature of the adsorption. The DEP adsorption capacity did not change after 10 batch successive reactions, demonstrating the usefulness of the magnetic beads in applications.

Adsorption equilibrium, kinetics and thermodynamics of α-amylase on poly(DVB-VIM)-Cu(+2) magnetic metal-chelate affinity sorbent.

Designing an immobilised metal ion affinity process on large-scale demands that a thorough understanding be developed regarding the adsorption behaviour of proteins on metal-loaded gels and the characteristic adsorption parameters to be evaluated. In view of this requirement, interaction of α-amylase as a model protein with newly synthesised magnetic-poly(divinylbenzene-1-vinylimidazole) [m-poly(DVB-VIM)] microbeads (average diameter, 53-212 µm) was investigated. The m-poly(DVB-VIM) microbeads were prepared by copolymerising of divinylbenzene (DVB) with 1-vinylimidazole (VIM). The m-poly(DVB-VIM) microbeads were characterised by N(2) adsorption/desorption isotherms, electron spin resonance, elemental analysis, scanning electron microscope and swelling studies. Cu(2+) ions were chelated on the m-poly(DVB-VIM) beads and used in adsorption of α-amylase in a batch system. The maximum α-amylase adsorption capacity of the m-poly(DVB-VIM)-Cu(2+) beads was determined as 10.84 mg/g at pH 6.0, 25 °C. The adsorption data were analyzed using three isotherm models, which are the Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. The pseudo-first-order, pseudo-second-order, modified Ritchie's-second-order and intraparticle diffusion models were used to test dynamic experimental data. The study of temperature effect was quantified by calculating various thermodynamic parameters such as Gibbs free energy, enthalpy and entropy changes.

Assesment of dimethyl phthalate removal from aqueous phase using barium hexaferrite containing magnetic beads.

The barium hexaferrite (BaFe(12)O(19)) containing magnetic poly (ethylene glycol dimethacrylate-vinyl pyridine; mag-poly [EGDMA-VP]) beads (average diameter=53-212 µm) were synthesized and characterized. Their use as an adsorbent in the removal of dimethyl phthalate (DMP) from an aqueous solution was investigated. The mag-poly (EGDMA-VP) beads were prepared by copolymerizing of 4-vinyl pyridine (VP) with ethylene glycol dimethacrylate (EGDMA). The mag-poly (EGDMA-VP) beads were characterized by N(2) adsorption/desorption isotherms (BET), vibrating sample magnetometer (VSM), X-ray powder diffraction (XRD), elemental analysis, scanning electron microscope (SEM), and swelling studies. At a fixed solid/solution ratio, the various factors affecting the adsorption of DMP from aqueous solutions such as pH, initial concentration, contact time, and temperature were analyzed. The maximum DMP adsorption capacity of the mag-poly (EGDMA-VP) beads was determined as 96.2 mg/g at pH 3.0, 25 °C. All the isotherm data can be fitted with both the Langmuir and the Dubinin-Radushkevich isotherm models. The pseudo-first-order, pseudo-second-order, Ritch-second-order, and intraparticle diffusion models were used to describe the adsorption kinetics. The thermodynamic parameters obtained indicated the exothermic nature of the adsorption. The DMP adsorption capacity did not change after 10 batch successive reactions, demonstrating the usefulness of the magnetic beads in applications.

Poly(hydroxyethyl methacrylate) based affinity membranes for in vitro removal of anti-dsDNA antibodies from SLE plasma.

The preparation of polymeric membrane using affinity technology for application in blood filtration devices is described here. DNA attached poly(hydroxyethyl methacrylate) (PHEMA) based microporous affinity membrane was prepared for selective removal of anti-dsDNA antibodies from systemic lupus erythematosus (SLE) patient plasma in in vitro. In order to further increase blood-compatibility of affinity membrane, aminoacid based comonomer N-methacryloyl-L-alanine (MAAL) was included in the polymerization recipe. PHEMAAL membrane was produced by a photopolymerization technique and then characterized by swelling tests and scanning electron microscope (SEM) studies. Blood-compatibility tests were also performed. The water swelling ratio of PHEMAAL membrane increased significantly (133.2%) compared with PHEMA (58%). PHEMAAL membrane has large pores around in the range of 5-10 microm. All the clotting times increased when compared with PHEMA membrane. Loss of platelets and leukocytes was very low. DNA loading was 7.8 mg/g. There was a very low anti-dsDNA-antibody adsorption onto the plain PHEMAAL membrane, about 78 IU/g. The PHEMAAL-DNA membrane adsorbed anti-dsDNA-antibody in the range of 10-68 x 10(3)IU/g from SLE plasma. Anti-dsDNA-antibody concentration decreased significantly from 875 to 144 IU/ml with the time. Anti-dsDNA-antibodies could be repeatedly adsorbed and eluted without noticeable loss in the anti-dsDNA-antibody adsorption amount.