Kinetic study on heterogeneous nucleation and incubation period during chemical vapor deposition.

The kinetics of heterogeneous nucleation during chemical vapor deposition (CVD) is still unclear despite its importance. Nucleation delay is often observed in many CVD processes, which is known as the incubation period (τi). In this study, the effects of concentration (C) and sticking probability (η) of film-forming species on τi were formulated based on our kinetic model. To discuss the kinetics, τi -1 with the rate dimension was used and formulated using C and η. Because η onto heterogeneous surfaces (ηhetero) is difficult to evaluate, the study was initiated with η onto homogeneous surfaces (ηhomo), followed by a discussion on its reasonability. The formulation was validated using the experimental dataset for SiC-CVD from CH3SiCl3/H2 onto BN underlayers because CVD involves multiple film-forming species with different ηhomo ranging from 10-6 to 10-2 and thus is a suitable system for studying the effect of ηhomo. High-aspect-ratio (1000:1) parallel-plate microchannels consisting of τi-involving BN and a τi-free Si surface were utilized to separate these film-forming species along the microchannel depth. τi was exceptionally long, up to several hours, depending on the CVD conditions. τi -1 was found to be proportional to Cn, where n is the reaction order. n was quantified as ≈1.6, suggesting the initial nucleation was triggered by the impingement of two adspecies in the second order and lowered possibly by the discrepancy between C in the gas-phase and that actually producing adspecies on the surface. τi -1 was also found to be proportional to ηhomo. The exceptionally long τi was likely originated from the significantly lower ηhetero than ηhomo and the higher activation energy for ηhetero than that for ηhomo.

Conformal and Stoichiometric Chemical Vapor Deposition of Silicon Carbide onto Ultradeep Heterogeneous Micropores by Controlling the Initial Nucleation Stage.

Conformal chemical vapor deposition (CVD) of silicon carbide (SiC) from methyltrichlorosilane (MTS) and hydrogen (H2) onto high-aspect-ratio (HAR; typically >100:1) three-dimensional features has been a challenge in the fabrication of ceramic matrix composites. In this study, the impact of heterogeneous underlayers on the initial nucleation of SiC-CVD was studied using HAR (1000:1) microchannels with a tailored wetting underlayer of Si(100) and dewetting underlayers of thermally formed amorphous silicon dioxide (a-SiO2) and turbostratic boron nitride (t-BN). Incubation periods were distributed in the microchannels on a-SiO2 and t-BN underlayers, with the longest period of 70 min found at the feature-bottom due to a decreased concentration (C) of film-forming species. The longer incubation periods with more dewetting underlayers arose due to demoted initial nucleation. Prolonged incubation at the feature bottom led to poor conformality because thick films had already formed at the inlet when film formation began at the feature bottom. The incubation periods were eliminated by increasing the supply of MTS/H2, in accordance with classical heterogeneous nucleation theory. In the meantime, carbon-rich SiC films formed in the vicinity of dewetting a-SiO2 and t-BN underlayers at the feature bottoms, with greater carbon segregation on more dewetting underlayers. This was probably due to the deposition of pyrocarbons (CH4, C2H2, and/or C2H4) generated from MTS/H2 in the gas phase. Decreasing the temperature (T) from 1000 to 900 °C prevented carbon-rich film formation, and the expected deposition rate of pyrocarbon decreased to 0.6% for the case of CH4. A higher C of MTS/H2 combined with a lower T enabled conformal and stoichiometric film formation on the heterogeneous HAR features.