Electrospun Cactus Mucilage/Poly(vinyl alcohol) Nanofibers as a Novel Wall Material for Dill Seed Essential Oil (Anethum graveolens L.) Encapsulation: Release and Antibacterial Activities.

This study aimed to create long-lasting carriers by producing electrospun nanofibers loaded with dill seed (Anethum graveolens L.) essential oil (DSEO), using cactus mucilage (CM) and poly(vinyl alcohol) (PVA). Continuous and uniform electrospun nanofibers with a diameter of 158 ± 18 to 230 ± 26 nm were successfully made from the CM/PVA blend solution and the CM/PVA/DSEO emulsion. Atomic force microscopy topographic images revealed that the electrospun nanofibers had a tubular morphology. The thermogravimetric curves of DSEO, CM, pure PVA, and electrospun nanofibers demonstrate that the polymers used and the essential oil have effective chemical interactions. The water contact angle results suggest that the manufactured nanofibers are hydrophilic. CM/PVA consistently achieves a remarkable encapsulation efficiency of 100% DSEO. The electrospun nanofibers enabled the controlled release of free and encapsulated DSEO, resulting in sustained long-term release. The agar disk diffusion technique was used to study the antimicrobial activity of electrospun nanofibers and nanofibers containing DSEO against Gram-positive and Gram-negative bacteria. With a minimum inhibitory concentration of 2.5 mg/mL and a minimum bactericidal concentration of 5 mg/mL, electrospun nanofibers containing DSEO demonstrated bacteriostatic and bactericidal activities against foodborne pathogenic bacteria (Staphylococcus aureus and Pseudomonas aeruginosa). The DSEO-loaded electrospun nanofibers derived from carbohydrates show promise as an active interior coating for use in biomedical and food packaging applications.

Electrospun Azo-Cellulose Fabric: A Smart Polysaccharidic Photo-Actuator.

A natural polysaccharide-based smart photo-actuator is fabricated via electrospinning of cellulose 4-phenyl azobenzoate (Azo-Cel) from its organic solution in a mixture of high-volatile acetone, a poor solvent of Azo-Cel, and low-volatile N,N-dimethylacetamide (DMAc), a good solvent of Azo-Cel. At an optimal polymer concentration (17 wt%) and solvent mixing ratio (acetone/DMAc = 3/2 (v/v)), stable electrified polymer jets are formed and continuous nanofibers and their nonwoven fabric can be drawn on a cylinder-shaped rotating drum electrode under a high electric field (25 kV). Scanning electron microscopic observation of the Azo-Cel fabric confirms that the fabric consists of uniaxially aligned nanofibers with a mean diameter of 207 nm. The water contact angle of the Azo-Cel fabric reversibly decreases and increases in response to alternate irradiation with UV and visible light to induce geometric deformation of the azobenzene moiety between the trans and cis isomers, which lead to lower and higher surface free energies, respectively. In addition, self-standing Azo-Cel fabric exhibits a UV-driven photo-mechanical asymmetric bending deformation toward the light source.

Electrospun Cellulosic Membranes toward Efficient Chiral Resolutions via Enantioselective Permeation.

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC), known as one of the most versatile chiral selectors packed in columns for chiral chromatography, is electrospun for the first time. The electrospun nanofibers with a mean diameter of 329 nm form a self-standing nonwoven textile with a specific surface area of 5.6 m2/g. The textile is sandwiched between commercially available polytetrafluoroethylene membrane filters as a support material to fabricate a CDMPC membrane system for the chiral resolution of a racemic mixture, (R,S)-1-(1-naphthyl)ethanol. A vacuum filtration of the racemic mixture through the membrane system using a mixed solvent of n-hexane/2-propanol = 9/1 (v/v) enriches the S-enantiomer in the filtrate due to an enantioselective sorption of the R-enantiomer. The sorption capacity can be regenerated repeatedly via extractions of the adsorbed enantiomers from the membrane system after the filtrations. By repeating the vacuum filtration-extraction process for 15 cycles, the enantiomeric excess (e.e.) of the S-isomer in the filtrate increases up to 32.9%.

Phototropic Multiresponsive Active Nanogels.

Aqueous dispersions of nanogels that respond to switches in environmental pH and/or temperature by changes in their hydrodynamic radius (Rh ) and/or ζ-potential are prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization-induced thermal (70 °C) self-assembly (PITSA) of N-isopropylacrylamide (NIPAM) in the presence of a poly(methacrylic acid) (PMAA)-substituted macromolecular chain transfer agent and a cross-linker. Photochromic spiropyran (SP) moieties are coupled to the carboxylic acid groups of the nanogels. Upon UV irradiation, the neutral SP isomerizes to the zwitterionic merocyanine (ME) form. Upon UV light irradiation, microgels formed by assembly of SP nanogels undergo a collective motion toward the UV-light source.

Self-Assembly of Oligosaccharide-b-PMMA Block Copolymer Systems: Glyco-Nanoparticles and Their Degradation under UV Exposure.

This paper discusses the self-assembly of oligosaccharide-containing block copolymer and the use of ultraviolet (UV) to obtain nanoporous glyco-nanoparticles by photodegradation of the synthetic polymer block. Those glyco-nanoparticles consisting of oligosaccharide-based shell and a photodegradable core domain were obtained from the self-assembly of maltoheptaose-block-poly(methyl methacrylate) (MH-b-PMMA48) using the nanoprecipitation protocol. MH-b-PMMA48 self-assembled into well-defined spherical micelles (major compound) with a hydrodynamic radius (Rh) of ca. 10 nm and also into large compound micellar aggregates (minor compound) with an Rh of ca. 65 nm. The oligosaccharide shells of these glyco-nanoparticles were cross-linked through the Michael-type addition of divinyl sulfone under dilute conditions to minimize the intermicellar cross-linking. The core domain photodegradation of the cross-linked glyco-nanoparticles was induced under exposure to 254 nm UV radiation, resulting in porous glyco-nanoparticles with an Rh of ca. 44 nm. The morphology of the cross-linked shell and the core photodegradation of these glyco-nanoparticles were characterized using static light scattering, dynamic light scattering, Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, field-emission gun-scanning electron microscopy, and transmission electron microscopy. The innovative aspect of this approach concerns the fact that after removing the PMMA domains the porous nanoparticles are mostly composed of biocompatible and nontoxic oligosaccharides.

Nanoparticles Made From Xyloglucan-Block-Polycaprolactone Copolymers: Safety Assessment for Drug Delivery.

Xyloglucan-block-polycaprolactone (XGO-PCL) copolymer nanoparticles have been proposed as nanocarriers for drug delivery. However, the possible harmful effects of exposure to nanoparticles still remain a concern. Therefore, the aim of this study is to evaluate the potential toxicity of XGO-PCL nanoparticles using in vitro and in vivo assays. Cytotoxicity and genotoxicity studies were conducted on MRC-5 human fetal lung fibroblast cells upon exposure to XGO-PCL nanoparticles. No significant reduction in the cell viability and no DNA damage were observed at the different concentrations tested. Erythrocyte toxicity was assessed by the incubation of nanoparticles with human blood. XGO-PCL nanoparticles induced a hemolytic ratio of less than 1%, indicating good blood compatibility. Finally, the subacute toxicity of XGO-PCL nanoparticles (10 mg/kg/day) was evaluated in BALB/c mice when administered orally or intraperitoneally for 14 days. Results of the in vivo toxicity study showed no clinical signs of toxicity, mortality, weight loss, or hematological and biochemical alterations after treatment with nanoparticles. Also, microscopic analysis of the major organs revealed no histopathological abnormalities, corroborating the previous results. Thus, it can be concluded that XGO-PCL nanoparticles induced no effect indicative of toxicity, indicating their potential use as drug delivery systems.

Glyco-Nanoparticles Made from Self-Assembly of Maltoheptaose-block-Poly(methyl methacrylate): Micelle, Reverse Micelle, and Encapsulation.

The synthesis and the solution-state self-assembly of the "hybrid" diblock copolymers, maltoheptaose-block-poly(methyl methacrylate) (MH-b-PMMA), into large compound micelles (LCMs) and reverve micelle-type nanoparticles, are reported in this paper. The copolymers were self-assembled in water and acetone by direct dissolution method, and the morphologies of the nanoparticles were investigated by dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), transmission electron microscopy (TEM), atomic force microscopy (AFM), proton nuclear magnetic resonance ((1)H NMR), and fluorescence spectroscopy as a function of the volume fraction of the copolymer hydrophobic block, copolymer concentration, stirring speed, and solvent polarity. The DLS measurements and TEM images showed that the hydrodynamic radius (Rh) of the LCMs obtained in water increases with the copolymer concentration. Apart from that, increasing the stirring speed leads to polydispersed aggregations of the LCMs. On the other hand, in acetone, the copolymers self-assembled into reverse micelle-type nanoparticles having Rh values of about 6 nm and micellar aggregates, as revealed the results obtained from DLS, AFM, and (1)H NMR analyses. The variation in micellar structure, that is, conformational inversion from LCMs to reverse micelle-type structures in response to polarity of the solvent, was investigated by apparent water contact angle (WCA) and (1)H NMR analyses. This conformational inversion of the nanoparticles was further confirmed by encapsulation and release of hydrophobic guest molecule, Nile red, characterized by fluorescence spectroscopy.

Maltopentaose-conjugated CTA for RAFT polymerization generating nanostructured bioresource-block copolymer.

We now describe the synthesis of a new family of oligosaccharide-conjugated functional molecules, which act as chain transfer agents (CTAs) for the reversible addition-fragmentation chain transfer (RAFT) polymerization. The synthesis was started from the catalyst-free direct N-glycosyl reaction of 5-azidopentylamine onto maltopentaose (Mal5) in dry methanol at room temperature and subsequent N-protected reaction with acetic anhydride, producing a stable oligosaccharide-building block, such as Mal5 with an azidopentyl group (Mal5-N3). The azido group was hydrogenated using platinum dioxide (PtO2) as a catalyst to give Mal5 with aminopentyl group (Mal5-NH2), which was then reacted with CTA molecules bearing activated ester moieties. These reactions produced Mal5-modified macro-CTAs (Mal5-CTAs, 1), which were used for the RAFT polymerizations of styrene (St) and methyl methacrylate (MMA) in DMF. The polymerizations were performed using the [M]0/[1]0 values ranging from 50 to 600, affording the Mal5-hybrid amphiphilic block copolymers (BCPs), such as Mal5-polystyrene (2) and Mal5-poly(methyl methacrylate) (3), with a quantitative end-functionality and the controlled molecular weights between 4310 and 20 300 g mol(-1). The small-angle X-ray scattering (SAXS) measurements were accomplished for 2 and 3 to ensure their abilities to form phase separated structures in their bulk states with the increasing temperatures from 30 to 190 °C. The featured results were observed for 2 (ϕMal5 = 0.14) and 3 (ϕMal5 = 0.16) at temperatures above 100 °C, where ϕMal5 denotes the volume fraction of the Mal5 unit in the BCP sample. For both BCP samples, the primary scattering peaks q* were clearly observed together with the higher-ordered scattering peaks √2q* and √3q*. Thus, these Mal5-hybrid amphiphilic BCP samples have a body centered cubic (BCC) phase morphology. The domain spacing (d) values of the BCC morphology for 2 (ϕMal5 = 0.14) and 3 (ϕMal5 = 0.16) were 10.4 and 9.55 nm, respectively, which were determined using Bragg's relation (d = 2π/q*). The present RAFT agents were shown to eventually provide the phase separated structural polymeric materials in which 5.4 nm bioresource-spherical domains were periodically arrayed at the interval of about 10 nm.

Xyloglucan-block-poly(ϵ-caprolactone) copolymer nanoparticles coated with chitosan as biocompatible mucoadhesive drug delivery system.

The development of novel xyloglucan-block-poly(ϵ-caprolactone) (XGO-b-PCL) nanoparticles coated with the mucoadhesive polysaccharide chitosan is described. XGO-b-PCL nanoparticles show monodisperse size distribution (Rh = 50 nm). Curcumin is successfully encapsulated within the PCL core within drug to polymer ratio of 1:5 (w/w). The coating of nanoparticles with chitosan results in an increased particle size and positive surface charge due to the polycation nature of the chitosan. Mucoadhesive properties of chitosan-coated nanoparticles are demonstrated by its exceptional ability to interact with mucin through electrostatic forces. Finally, in vitro studies show that curcumin-loaded nanoparticles exhibit higher cytotoxic effects against B16F10 melanoma cells than L929 fibroblast cells.

Self-assembly of maltoheptaose-block-polystyrene into micellar nanoparticles and encapsulation of gold nanoparticles.

The present paper discusses the controlled self-assembly of sugar-containing block copolymer, maltoheptaose-block-polystyrene (MH(1.2k)-b-PS(4.5k)), into micellar nanoparticles of ca. 30 nm radius in aqueous media and their possibility of gold encapsulation. Micellar association of MH(1.2k)-b-PS(4.5k) into nanoparticles was demonstrated by mixing a large amount of water (MH-selective solvent) with a solution of MH(1.2k)-b-PS(4.5k) in a mixture of tetrahydrofuran (THF) (PS-selective solvent) and water with a certain weight fraction [4:1 (w/w) THF/water], where MH(1.2k)-b-PS(4.5k) exists as well-swollen single chains, followed by evaporation of THF. The mean hydrodynamic radii (Rh) of the nanoparticles were determined by dynamic light scattering (DLS) to be ca. 30 and 80 nm depending upon the method of preparation. The resulting nanoparticles were clearly visualized by transmission electron microscopy (TEM), atomic force microscopy (AFM), and field emission gun-scanning electron microscopy (FEG-SEM) imaging and complemented by nanoparticle tracking analysis (NTA) using a NanoSight instrument. The preliminary study of the self-assembly of MH(1.2k)-b-PS(4.5k) in the presence of gold nanoparticles functionalized with PS chains grafted on their surface indicated potential possibilities of encapsulation of gold nanoparticles into the block copolymer nanoparticles in aqueous media.

Control of 10 nm scale cylinder orientation in self-organized sugar-based block copolymer thin films.

The present paper describes the orientational control of 10 nm scale cylinders in sugar-based block copolymer thin films by simply varying the composition of the annealing co-solvent. The affinity of the block copolymer to the solvent vapor could be systematically adjusted in this way.

Thermoresponsive self-assemblies of cyclic and branched oligosaccharide-block-poly(N-isopropylacrylamide) diblock copolymers into nanoparticles.

This paper discusses the thermoresponsive nanoparticles obtained by self-assemblies of nonlinear oligosaccharide-based diblock copolymer systems. These diblock copolymers were synthesized by Cu(I)-catalyzed 1,3-dipolar azide/alkyne cycloaddition ("click" reaction) of propargyl-functionalized ß-cyclodextrin (ßCyD) and xyloglucooligosaccharide (XGO) with poly(N-isopropylacrylamide) (PNIPAM) having a terminal azido group prepared by atom transfer radical polymerization (ATRP). Elastic and quasi-elastic light scattering analysis of the dibock copolymers in H(2)O indicated that thermodynamic phase transitions of the PNIPAM blocks at their cloud points (T(cp)s ≈ 34 °C), around lower critical solution temperatures (LCSTs), triggered their self-assemblies into the nanoparticles. These nanoparticles had narrow size distributions and small interphases (i.e., sharp boundaries). The mean hydrodynamic radii (R(h)s) of the ßCyD and XGO-based nanoparticles were determined to be around 150 and 250 nm upon slow heating (i.e., step-by-step heating), and 364 and 91.5 nm upon fast heating, respectively, depending on a predominance of the interchain association or the intrachain contraction. Transmission electron microscope (TEM) and field emission gun-scanning electron microscopy (FEG-SEM) images of the nanoparticles clearly showed compact spherical nanoparticles whose cores are mainly made with the PNIPAM blocks, whereas the rough shells consist in the oligosaccharidic blocks.

Sweet block copolymer nanoparticles: preparation and self-assembly of fully oligosaccharide-based amphiphile.

The preparation of biocompatible nanocarriers that have potential applications in the cosmetic and health industries is highly desired. The self-assembly of amphiphilic block copolymers displaying biosourced polysaccharides at the surface is one of the most promising approaches. In the continuity of our works related to the preparation of "hybrid" amphiphilic oligosaccharide-based block copolymers, we present here the design of a new generation of self-assembled nanoparticles composed entirely of oligosaccharide-based amphiphilic block co-oligomers (BCO). These systems are defined by a covalent linkage of the two saccharidic blocks through their reducing end units, resulting in a sweet "head-to-head" connection. As an example, we have prepared and studied a BCO in which the hydrophilic part is composed of a free maltoheptaosyl derivative clicked to a hydrophobic part composed of a peracetylated maltoheptaosyl derivative. This amphiphilic BCO self-assembles to form spherical micelles in water with an average diameter of 30 nm. The efficient enzymatic hydrolysis of the maltoheptaose that constitutes the shell of the micelles was followed by light scattering and colorimetric methods.

Oligosaccharide/silicon-containing block copolymers with 5 nm features for lithographic applications.

Block copolymers demonstrate potential for use in next-generation lithography due to their ability to self-assemble into well-ordered periodic arrays on the 3-100 nm length scale. The successful lithographic application of block copolymers relies on three critical conditions being met: high Flory-Huggins interaction parameters (χ), which enable formation of <10 nm features, etch selectivity between blocks for facile pattern transfer, and thin film self-assembly control. The present paper describes the synthesis and self-assembly of block copolymers composed of naturally derived oligosaccharides coupled to a silicon-containing polystyrene derivative synthesized by activators regenerated by electron transfer atom transfer radical polymerization. The block copolymers have a large χ and a low degree of polymerization (N) enabling formation of 5 nm feature diameters, incorporate silicon in one block for oxygen reactive ion etch contrast, and exhibit bulk and thin film self-assembly of hexagonally packed cylinders facilitated by a combination of spin coating and solvent annealing techniques. As observed by small angle X-ray scattering and atomic force microscopy, these materials exhibit some of the smallest block copolymer features in the bulk and in thin films reported to date.

Elaboration of chitosan-coated nanoparticles loaded with curcumin for mucoadhesive applications.

Polycaprolactone (PCL) nanoparticles decorated with a mucoadhesive polysaccharide chitosan (CS) containing curcumin were developed aiming the buccal delivery of this drug. These nanoparticles were prepared by the nanoprecipitation method using different molar masses and concentrations of chitosan and concentrations of triblock surfactant poloxamer (PEO-PPO-PEO), in order to optimize the preparation conditions. Chitosan-coated nanoparticles showed positive surface charge and a mean particle radius ranging between 114 and 125 nm, confirming the decoration of the nanoparticles with the mucoadhesive polymer, through hydrogen bonds between ether and amino groups from PEO and CS, respectively. Dynamic Light Scattering (DLS) studies at different scattering angles and concentrations have shown that the nanoparticles are monodisperse (polydispersity indices were lower than 0.3). The nanoparticle systems were also examined with Nanoparticle Tracking Analysis (NTA), and the results were in good agreement with those obtained by DLS. Colloidal systems showed mean drug content about 460 µg/mL and encapsulation efficiency higher than 99%. Finally, when coated with chitosan, these nanoparticles show a great ability to interact with mucin indicating also their suitability for mucoadhesive applications.

10 nm Scale Cylinder-Cubic Phase Transition Induced by Caramelization in Sugar-Based Block Copolymers.

To date, the feature size of microphase separation in block copolymers has been downsizing to 10 nm scale. However, morphological control for such a small feature is still a challenging task. The present Letter discusses a phase transition in a natural/synthetic "hybrid" block copolymer system based on an oligosaccharide and poly(ε-caprolactone) via thermal annealing. Time-resolved small-angle X-ray scattering investigation as a function of temperature indicated the phase transition from hexagonally close-packed cylinder to body-centered cubic at 10 nm scale. Atomic force microscope images of the block copolymer thin films annealed at different temperatures clearly confirmed the existence of these morphologies. The driving force of this phase transition (from cylinder to cubic) is the change of volume fraction of the block copolymer due to thermal caramelization.

Nano-organization of amylose-b-polystyrene block copolymer films doped with bipyridine.

This paper discusses the self-assembly of rod-coil amylose-b-polystyrene (Mal-b-PS) block copolymer thick and thin films. The nano-organization falls in an interdomain spacing d of about 10 nm, much smaller than flexible-flexible petrol block copolymer systems. Additionally, hydrogen-bonding interactions between carbohydrate rods (amylose) and 4',4-bipyridine (bipy) molecules induces phase transitions. Indeed, adding bipy in maltooctadecaose-block-polystyrene (Mal18-b-PS) copolymers results, at room temperature, in the formation of a lamellar phase having Mal18 bipy-rich nanodomains instead of hexagonal close-packed (HCP) of cylinders made of Mal18, whereas a coexistence of Mal7bipy-rich cylindrical and spherical nanodomains are formed from maltoheptaose-b-polystyrene (Mal7-b-PS) copolymers instead of a poorly organized array of Mal7-based cylinders. On heating, the Mal7bipy-b-PS system shows more rich phase behavior as compared to the Mal7-b-PS one due to weakening of hydrogen bonding with temperature. Such a system is of great interest in developing active layers in light-emitting diodes (LEDs) or in photovoltaic cells to realize devices with an optimal structure, that is, having large interface area and domain size with similar exciton diffusion length (10 nm).

Enhancement of plant and bacterial lectin binding affinities by three-dimensional organized cluster glycosides constructed on helical poly(phenylacetylene) backbones.

A series of poly(phenylacetylene)s bearing diverse saccharide pendants--N-acetyl-D-glucosamine, D-lactose, and N-acetyl-D-neuraminic acid--were synthesized by rhodium-mediated polymerizations of the corresponding acetyl-protected glycosylated phenylacetylenes followed by deprotection. The circular dichroism spectra of these glycosylated poly(phenylacetylene)s each displayed split-type Cotton effects in the long absorption region of the conjugated polymer backbone (260-500 nm), thus indicating predominantly one-handed helical conformations in their backbones. The binding affinities of these glycosylated poly(phenylacetylene)s, and those of previously reported phenylacetylenes bearing D-galactose, towards plant and bacterial lectins were investigated by hemagglutination inhibition assay and isothermal titration calorimetry (ITC). The stoichiometries of binding vary strongly, depending on the lectin binding sites and the accessibilities of the carbohydrate residues in the helices. The measured affinities also vary, with the maximum value observed for the interaction between poly-PA-α-Gal and lectin I from Pseudomonas aeruginosa, with a K(d) value of 4 µM per monosaccharide representing a 200-fold increase relative to the corresponding monomer.

Thermoresponsive vesicular morphologies obtained by self-assemblies of hybrid oligosaccharide-block-poly(N-isopropylacrylamide) copolymer systems.

This work discusses the self-assembly properties of thermoresponsive hybrid oligosaccharide-block-poly(N-isopropylacrylamide) copolymer systems: maltoheptaose-block-poly(N-isopropylacrylamide) (Mal(7)-b-PNIPAM(n)) copolymers. Those systems at different molar masses and volume fractions were synthesized using Cu(I)-catalyzed 1,3-dipolar azide/alkyne cycloaddition, so-called "click" chemistry, between an alkynyl-functionalized maltoheptaose (1) and poly(N-isopropylacrylamide) having a terminal azido group (N(3)-PNIPAM(n)) prepared by atom transfer radical polymerization (ATRP). While the cloud point (T(cp)) of the N(3)-PNIPAM(n) ranged from 36.4 to 51.5 degrees C depending on the degree of polymerization, those obtained of the diblock copolymers ranged from 39.4 to 73.9 degrees C. The self-assembly of such systems is favored due to the hydrophobicity of the PNIPAM in water above the T(cp). While the N(3)-PNIPAM(n) present polydisperse globular shape with a mean diameter of 500 nm, well-defined vesicular morphologies with an approximate diameter of 300 nm are obtained in diblock copolymer systems. These results were obtained and confirmed using static and dynamic light scattering as well as imaging techniques such as transmission electron microscope experiments.

Size-specific, colorimetric detection of counteranions by using helical poly(phenylacetylene) conjugated to L-leucine groups through urea acceptors.

A colorimetric detection susceptible to the dimensions of guest counteranions has been demonstrated by using poly(phenylacetylene) with L-leucine and urea functionalities (poly-PA-Leu). Poly-PA-Leu was prepared from N-(4-ethynylphenylcarbamoyl)-L-leucine ethyl ester (PA-Leu) by using [Rh(+){eta(6)-C(6)H(5))B(-)(C(6)H(5))(3)}(2,5-norbornadiene)] as a catalyst. The biased helical conformation of poly-PA-Leu was demonstrated through Cotton effects in the circular dichroism (CD) spectra. The addition of ammonium salts, including tetra-n-butylammonium acetate, tetra-n-butylammonium chloride, and tetra-n-butylammonium bromide anions (CH(3)COO(-), Cl(-), and Br(-)), into the poly-PA-Leu solution intensified the CD responses of poly-PA-Leu, which is indicative of the chiral adjustability of anion recognition by using urea groups. In addition, the combination of poly-PA-Leu with the CH(3)COO(-), Cl(-), and Br(-) anions promoted large redshifts in the absorption spectra, thus providing dramatic color changes from pale yellow to red. Guest dependency in the CD and UV/Vis spectra was clearly correlated with the size of the counteranions. Fundamentally, the addition of tetra-n-butylammonium nitrate, tetra-n-butylammonium hydrogen sulfate, tetra-n-butylammonium perchlorate, tetra-n-butylammonium azide, tetra-n-butylammonium fluoride, and tetra-n-butylammonium iodide anions (NO(3) (-), HSO(4) (-), ClO(4) (-), N(3) (-), F(-), and I(-)) has no effect on either the CD or UV/Vis profiles of poly-PA-Leu. The guest specificity observed in the CD and UV/Vis spectra clearly demonstrated the guest-dimension selectivity of poly-PA-Leu in counteranion recognition.