RESUMO
A multi-metal composite was consolidated from the Ti50Ni25Cu25 and Fe50Ni33B17 alloys by room-temperature high-pressure torsion (HPT). The structural research methods used in this study were X-ray diffractometry, high-resolution transmission electron microscopy, scanning electron microscopy with an electron microprobe analyzer in the mode of backscattered electrons, and the measurement of indentation hardness and modulus of the composite constituents. The structural aspects of the bonding process have been examined. The method of joining materials using their coupled severe plastic deformation has been established to play a leading role in the consolidation of the dissimilar layers upon HPT.
RESUMO
The evolution of a nanostructured state of palladium-lead membrane alloys during their interaction with hydrogen was studied using precision X-ray diffraction with synchrotron radiation (SR) and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDXS). The importance of this topic is due to the need and demand for improving the performance characteristics of dense metal diffusion filters for high purity hydrogen separation processes. Palladium-based membrane filters with lead concentrations of 5 and 20 wt.% were prepared via electric arc melting from high purity metals (99.95%). The thickness of the filters was 50 µm. Hydrogenation was carried out from a gas medium at 573 K and the pressure of 16 atm. within 150 min. The focus of the study is on the structural state of diffusion filter membranes depending on the content of the palladium-alloying element-lead-and on analysis of the substructure of alloys before and 5300 h relaxation after hydrogenation is carried out. Specific features of the surface morphology and the structure of the membrane filters depending on the concentration of lead in the alloys are determined. The formation and development of deformation processes in metal systems upon the hydrogenation is shown. The establishment of peculiarities of hydrogen interaction with metals will contribute to obtaining new potentially important characteristics of membrane filters.
RESUMO
In the stoichiometric iron-based superconductor EuRbFe4As4, superconductivity coexists with a long-range magnetic ordering in Eu layers. Using high-resolution transmission electron microscopy (HRTEM), we observed an atomic structure of as-grown EuRbFe4As4 crystals. HRTEM shows that crystals have two-dimensional intrinsic nanoinclusions established to be the RbFe2As2 (122) phase with a volume fraction of ~5.6%. In contrast with the CaKFe4As4 compound, similar inclusions are not superconducting down to 2 K, and no second magnetization peak was observed in the magnetization measurements at low temperature with B â ab. We show that the non-superconducting 122 phase nanoinclusions could act as 2D pinning centers.
RESUMO
The microstructure of GdBa2Cu3O7-δ based on superconducting tapes with BaSnO3 and BaZrO3 artificial pinning centers formed by high-rate pulse laser deposition in SuperOx Japan was studied by scanning/transmission electron microscopy. The artificial pinning centers have adopted columnar morphology with average diameter of about 8 nm (BaSnO3-doped sample) and 6.5 nm (BaZrO3-doped sample) and density of 500 µm-2 for the both samples. The average length of the BaSnO3 nanocolumns is about two times higher than the BaZrO3 nanocolumns. The angular dependences of critical current in magnetic field up to 1 Tesla at 77 and 65 K have been obtained. The critical current and its anisotropy depend on artificial pinning centers presence and their type. The angular dependence of resistivity in the field up to 9 Tesla was also studied and discussed.
