RESUMO
In this paper, we use Polyethylene Oxide (PEO) particles to control the morphology of Formamidinium (FA)-rich perovskite films and achieve large grains with improved optoelectronic properties. Consequently, a planar perovskite solar cell (PSC) is fabricated with additions of 5 wt% of PEO, and the highest PCE of 18.03% was obtained. This solar cell is also shown to retain up to 80% of its initial PCE after about 140 h of storage under the ambient conditions (average relative humidity of 62.5 ± 3.25%) in an unencapsulated state. Furthermore, the steady-state PCE of the PEO-modified PSC device remained stable for long (over 2500 s) under continuous illumination. This addition of PEO particles is shown to enable the tuning of the optoelectronic properties of perovskite films, improvements in the overall photophysical properties of PSCs, and an increase in resistance to the degradation of PSCs.
RESUMO
This paper presents the results of theoretical and experimental studies of the compressive deformation of bamboo (Bambusa Vulgaris-Schrad) in the middle section. The deformation mechanisms are elucidated via in-situ observations of deformation in specimens oriented for loading in directions that are either longitudinal or transverse. Compressive deformation is shown to result in progressive micro-buckling and kink band formation. The onset of micro-buckling is also shown to be well predicted by an Euler buckling model. The critical loads for failure in the transverse orientation are also shown to be consistent with the conditions for shear yielding in the plies with fibers that are oriented in an orthogonal direction to the loading axis.
