Preparation of pyridoxine-based polyurethane modified sensors and their use in simultaneous determination of Cu(II) - Co(II) ions.

In this study, pyridoxine-based polyurethane-modified electrodes were prepared to simultaneously and sensitively measure copper (Cu(II)) and cobalt (Co(II)) ions in complex matrix samples. For the production of the electrodes, firstly, the synthesis of pyridoxine-based polyurethane structures was carried out. In these syntheses, the polymer structure was diversified by using different isocyanates. Polyethyleneglycol-200 (PEG), pyridoxine (B6), and ß-cyclodextrin (ß-CD) groups were used as the source of polyol. The synthesized polyurethane structures were characterized by different instrumental techniques and used in gold electrode surface modification. Modified sensor surfaces were examined by scanning electron microscopy and atomic force microscopy techniques. The prepared modified sensors were used for the simultaneous detection of Cu(II) and Co(II) ions using the differential pulse voltammetry technique. The limit of detection (LOD), limit of quantitation (LOQ), and R2 values for Cu(II) ions were calculated as 8.81 µM, 29.4 µM, and 0.993, respectively. LOD, LOQ, and R2 values for Co(II) ions were calculated as 9.84 µM, 32.8 µM, and 0.9935, respectively. For repeatability, the relative standard deviation (RSD %) of the prepared simultaneous sensors was determined as 1.54 and 1.71 for Cu(II) and Co(II), respectively. As a result, Cu(II) and Co(II) ions were measured independently and simultaneously with high sensitivity. According to these results, it is predicted that pyridoxine-based polyurethane-modified sensors may be suitable for the simultaneous detection of Cu(II) and Co(II) in medical, food, and agricultural samples.

The Cytotoxicity, DNA Fragmentation, and Decreasing Velocity Induced By Chromium(III) Oxide on Rainbow Trout Spermatozoa.

The present study aimed to determine the cytotoxicity of chromium(III) oxide micro particles (Cr2O3-Ps) in rainbow trout (Oncorhynchus mykiss) spermatozoa. Firstly, Cr2O3-Ps were synthesized and structurally characterized the surface, morphological for particle size and thermal properties. In addition, its structural and elemental purity was determined using energy-dispersive X-ray (EDX) spectrum and elemental maps. Structural purity, thermal properties, and stability of Cr2O3-Ps were also examined in detail by performing thermal analysis techniques. The cytotoxicity of Cr2O3-Ps was measured by the observation of velocities, antioxidant activities, and DNA damages in rainbow trout spermatozoa after exposure during 3 h in vitro incubation. The straight line velocity (VSL), the curvilinear velocity (VCL), and the angular path velocity (VAP) of spermatozoa decreased after exposure to Cr2O3-Ps. While the superoxide dismutase (SOD) and the catalase (CAT) decreased, the lipid peroxidation increased in a dose-dependent manner. However, the total glutathione (tGSH) was not affected in this period. DNA damages were also determined in spermatozoa using Comet assay. According to DNA in tail (%) data, DNA damages have been detected with gradually increasing concentrations of Cr2O3-Ps. Furthermore, all of class types which are categorized as the intensity of DNA fragmentation has been observed between 50 and 500 µg/L concentrations of Cr2O3-Ps exposed to rainbow trout spermatozoa. At the end of this study, we determined that the effective concentrations (EC50) were 76.67 µg/L for VSL and 87.77 µg/L for VCL. Finally, these results about Cr2O3-Ps may say to be major risk concentrations over 70 µg/L for fish reproduction in aquatic environments.

Chemistry and engineering of brush type polymers: Perspective towards tissue engineering.

In tissue engineering, it is imperative to control the behaviour of cells/stem cells, such as adhesion, proliferation, propagation, motility, and differentiation for tissue regeneration. Surfaces that allow cells to behave in this way are critical as support materials in tissue engineering. Among these surfaces, brush-type polymers have an important potential for tissue engineering and biomedical applications. Brush structure and length, end groups, bonding densities, hydrophilicity, surface energy, structural flexibility, thermal stability, surface chemical reactivity, rheological and tribological properties, electron and energy transfer ability, cell binding and absorption abilities for various biological molecules of brush-type polymers were increased its importance in tissue engineering applications. In addition, thanks to these functional properties and adjustable surface properties, brush type polymers are used in different high-tech applications such as electronics, sensors, anti-fouling, catalysis, purification and energy etc. This review comprehensively highlights the use of brush-type polymers in tissue engineering applications. Considering the superior properties of brush-type polymer structures, it is believed that in the future, it will be an effective tool in structure designs containing many different biomolecules (enzymes, proteins, etc.) in the field of tissue engineering.

Interaction of nickel ferrite nanoparticles with nucleic acids.

In this article, we introduced an electrochemical biosensor employing graphite electrodes (GE) decorated with Nickel ferrite (NiFe2O4) nanoparticles for nucleic acid detection. NiFe2O4 nanoparticles in a narrow size distribution were synthesized with co-precipitation technique. Their chemical and crystallographic properties were characterized with FTIR and X-ray spectroscopies. Nanoparticle size distribution and hydrodynamic diameter were determined with particle size analyzer. Elemental content and purity of nanoparticles were analyzed with EDX analysis. Our analyses showed a diameter of ~10 nm for NiFe2O4 nanoparticles. Electrochemical properties of NiFe2O4 nanoparticles were examined with different analysis methods. Conductivity properties of NiFe2O4 nanoparticles were investigated with Cyclic Voltammetry (CV), which confirmed that nanoparticles on GE surface have a high surface area and conductivity. More importantly, in this article, the interactions between NiFe2O4 nanoparticles and double stranded DNA (dsDNA), single stranded DNA (ssDNA), and RNA were for the first time examined using Differential Pulse Voltammetry (DPV), CV, and Electrochemical Impedance Spectroscopy (EIS). Oxidation peak currents of NiFe2O4 nanoparticles and guanine bases of dsDNA, ssDNA, and RNA showed that NiFe2O4 nanoparticles effectively interacts with nucleic acids via an electrostatic mode.

Photocrosslinkable gelatin/collagen based bioinspired polyurethane-acrylate bone adhesives with biocompatibility and biodegradability.

Hard or soft tissue adhesives have been presented as a promising candidate to replace traditional wound closure methods. However, there are mechanical strength problems in biological adhesives and biocompatibility problems in synthetic-based adhesives. At this point, we aimed to remove all these disadvantages and produce a single adhesive that contains all the necessary features and acrylate functionalized UV-curable polyurethane formulations were produced with high crosslink density, high adhesion strength, biocompatibility and injectable property for easy application as potential biomedical adhesives. Aliphatic isophorone diisocyanate (IPDI) was used as the isocyanate source and ß-cyclodextrin was used for host-guest relationship with gentamicin by crosslinking. Proteins (gelatin (GEL), collagen (COL)) and PEGs of various molecular weight ranges (P200, P400, P600) were selected as the polyol backbone for polyurethane synthesis due to their multiple biological activities such as biocompatibility, biodegradability, biomimetic property. Several techniques have been used to characterize the structural, thermal, morphological, and various other physicochemical properties of the adhesive formulations. Besides, the possibility of its use as a hard tissue adhesive was investigated by evaluating the tissue adhesion strength in vitro and ex vivo via a universal testing analyzer in tensile mode. Corresponding adhesive formulations were evaluated by in vitro and in vivo techniques for biocompatibility. The best adhesion strength results were obtained as 3821.0 ±â€¯214.9, and 3722.2 ±â€¯486.8 kPa, for IPDI-COL-P200 and IPDI-GEL-P200, respectively. Good antibacterial activity capability toward Escherichia coli Pseudomonas aeruginosa, and Staphylococcus aureus were confirmed using disc diffusion method. Moreover, cell viability assay demonstrated that the formulations have no significant cytotoxicity on the L929 fibroblast cells. Most importantly, we finally performed the in vivo biodegradability and in vivo biocompatibility evaluations of the adhesive formulations on rat model. Considering their excellent cell/tissue viability, fast curable, strong adhesion, high antibacterial character, and injectability, these adhesive formulations have significant potential for tissue engineering applications.

Assessing short-term effects of magnetite ferrite nanoparticles on Daphnia magna.

Magnetic nanoparticles (MNPs) are used in a wide range of sectors ranging from electronics to biomedicine, as well as in eutrophicated lake restoration due to their high P, N, and heavy metal adsorption capacity. This study assessed the effects of MNPs on mortality and morphometric changes of D. magna. According to the SEM, the synthesised MNPs were found to have spherical nanoparticles, be uniformly distributed, and have a homolithic size distribution of 50-110 nm. The EDX spectra confirmed the elemental structure and purities of these MNPs. A total of 396 neonates were used for short-term bioassays (96 h) through the MNPs in the laboratory (16:8 photoperiod). Experiments were applied in triplicate for each concentration of CuFe2O4, CoFe2O4, and NiFe2O4 MNPs and their respective control groups. Mortality and morphological measurements of each individual were recorded every 24 h. In the probit analysis, the 96-h LC50 (p < 0.05) for CuFe2O4, CoFe2O4, and NiFe2O4 MNPs was calculated to be 1.455 mg L-1, 39.834 mg L-1, and 21.730 mg L-1, respectively. CuFe2O4 MNPs were found to be more toxic than the other two MNPs. The concentrations of CuFe2O4, CoFe2O4, and NiFe2O4 MNPs drastically affected life span and morphologic growth of D. magna as a result of a short time exposure. The results of this study are useful for assessing what risks they pose to freshwater ecosystems.

Melatonin protects sperm cells of Capoeta trutta from toxicity of titanium dioxide nanoparticles.

In this study, it was aimed to determine the protective effects of melatonin (0.01, 0.1, and 1 mM) against 10 mg/L titanium dioxide nanoparticles (TiO2-NPs) on kinematic and oxidative indices in the sperm cells of Capoeta trutta. Therefore, TiO2 nanoparticles were synthesized primarily within the scope of the study. The synthesized nanoparticles were characterized by structurally different techniques. Then, melatonin and TiO2 were applied to Capoeta trutta sperm cells by in vitro. According to our data, all doses of melatonin showed protective effects on all velocities of sperm cells such as the straight line velocity (VSL), the curvilinear velocity (VCL), and the angular path velocity (VAP) against TiO2-NPs, while 0.1 and 1 mM doses of melatonin improved the VSL value. Although TiO2-NPs increased total glutathione (tGSH), malondialdehyde (MDA) lipid peroxidation, and superoxide dismutase (SOD) compared to the control group, there were positive treatment effects for all doses of melatonin on antioxidant capacity of sperm cells. At the end of this research, it is suggested that over 0.1 mM dose of melatonin improves the velocity of sperm cells and it plays a protective role against the toxic effects of TiO2-NPs.

Investigation of toxic effects of amorphous SiO2 nanoparticles on motility and oxidative stress markers in rainbow trout sperm cells.

In this study, we investigated the effects of SiO2 nanoparticles (SiO2-NPs) (1, 10, 25, 50, and 100 mg/L) for 24 h in vitro on the motility parameters and oxidative stress markers such as total glutathione (TGSH), catalase (CAT), and malondialdehyde (MDA) of rainbow trout, Oncorhynchus mykiss sperm cells. Therefore, SiO2-NPs were synthesized with sol-gel reaction from tetraethoxy orthosilicate (TEOS). The prepared nanoparticle structures were characterized for chemical structure, morphology and thermal behavior employing Fourier transform infrared spectroscopy, X-ray spectroscopy, scanning electron micrograph, and thermal analysis (DTA/TGA/DSC) techniques. After exposure, there was statistically significant (p < 0.05) decreases in velocities of sperm cells. CAT activity significantly (p < 0.05) decreased by 9.6% in sperm cell treated with 100 mg/L. In addition, MDA level significantly increased by 70.4% and 77.5% in sperm cell treated with 50 and 100 mg/L SiO2-NPs, respectively (p < 0.05). These results showed that SiO2-NPs may have toxic effect on rainbow trout sperm cells in 50 mg/L and more.

The Toxicity Assessment of Iron Oxide (Fe3O4) Nanoparticles on Physical and Biochemical Quality of Rainbow Trout Spermatozoon.

The aim of this study was to evaluate the in vitro effect of different doses (50, 100, 200, 400, and 800 mg/L) of Fe3O4 nanoparticles (NPs) at 4 °C for 24 h on the kinematics of rainbow trout (Oncorhynchus mykiss, Walbaum, 1792) spermatozoon. Firstly, Fe3O4 NPs were prepared at about 30 nm from Iron (III) chloride, Iron (II) chloride, and NH3 via a co-precipitation synthesis technique. Then, the prepared Fe3O4 NPs were characterized by different instrumental techniques for their chemical structure, purity, morphology, surface properties, and thermal behavior. The size, microstructure, and morphology of the prepared Fe3O4 NPs were studied by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) spectroscopy, and scanning electron microscopy (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS). The thermal properties of the Fe3O4 NPs were determined with thermogravimetric analysis (TGA), differential thermal analysis (DTA), and differential scanning calorimeter (DSC) analysis techniques. According to our results, there were statistically significant (p < 0.05) decreases in the velocities of spermatozoon after treatment with 400 mg/L Fe3O4 NPs. The superoxide dismutase (SOD) and catalase (CAT) activities were significant (p < 0.05) decrease after 100 mg/L in after exposure to Fe3O4 NPs in 24 h. As the doses of Fe3O4 NPs increases, the level of malondialdehyde (MDA) and total glutathione (tGSH) significantly (p < 0.05) increased at doses of 400 and 800 mg/L.

The in vitro toxicity analysis of titanium dioxide (TiO2) nanoparticles on kinematics and biochemical quality of rainbow trout sperm cells.

In recent years, titanium dioxide (TiO2) nanoparticles (NPs) as metal oxide nanoparticles are widely used in industry, agriculture, personal care products, cosmetics, sun protection and toothpaste, electronics, foodstuffs and food packaging. This use of nano-TiO2 has been associated with environmental toxicity concerns. Therefore, the aim of this study was to evaluate the in vitro effect of different doses of TiO2 NPs (∼30-40 nm) (0.01, 0.1, 0.5, 1, 10 and 50 mg/L) at 4oC for 3 h on the sperm cell kinematics as velocities of Rainbow trout (Oncorhynchus mykiss, Walbaum, 1792) sperm cells. Furthermore, oxidative stress markers (total glutathione (TGSH) and superoxide dismutase (SOD) were assessed in sperm cells after exposure to TiO2 NPs. According to the obtained results, there were statistically significant (P < 0.05) decreasing in the velocities of sperm cells after 10 mg/L TiO2 NPs and an increase the activity of SOD (P < 0.05) and TGSH levels were determined.

Design of epoxy-functionalized Fe3O4@MCM-41 core-shell nanoparticles for enzyme immobilization.

The scope of our research was to prepare the organosilane-modified Fe3O4@MCM-41 core-shell magnetic nanoparticles, used for L-ASNase immobilization and explored screening of immobilization conditions such as pH, temperature, thermal stability, kinetic parameters, reusability and storage stability. In this content, Fe3O4 core-shell magnetic nanoparticles were prepared via co-precipitation method and coated with MCM-41. Then, Fe3O4@MCM-41 magnetic nanoparticles were functionalized by (3-glycidyloxypropyl) trimethoxysilane (GPTMS) as an organosilane compound. Subsequently, L-ASNase was covalently immobilized on epoxy-functionalized Fe3O4@MCM-41 magnetic nanoparticles. The immobilized L-ASNase had greater activity at high pH and temperature values. It also maintained >92% of the initial activity after incubation at 55 °C for 3 h. Regarding kinetic values, immobilized L-ASNase showed a higher Vmax and lower Km compared to native L-ASNase. In addition, it displayed excellent reusability for 12 successive cycles. After 30 days of storage at 4 °C and 25 °C, immobilized L-ASNase retained 54% and 26% of its initial activities while native L-ASNase lost about 68% and 84% of its initial activity, respectively. As a result, the immobilization of L-ASNase onto magnetic nanoparticles may provide an advantage in terms of removal of L-ASNase from reaction media.