Effect of cycle time on polyhydroxybutyrate (PHB) production in aerobic mixed cultures.

The aim of this study was to investigate the effect of cycle time on polyhydroxybutyrate (PHB) production under aerobic dynamic feeding system. The acetate-fed feast and famine sequencing batch reactor was used to enrich PHB accumulating microorganism. Sequencing batch reactor (SBR) was operated in four different cycle times (12, 8, 4, and 2 h) fed with a synthetic wastewater. The system performance was determined by monitoring total dissolved organic carbon, dissolved oxygen, oxidation-reduction potential, and PHB concentration. In this study, under steady-state conditions, the feast period of the SBR was found to allow the PHB storage while a certain part of stored PHB was used for continued growth in famine period. The percentage PHB storages by aerobic microorganism were at 16, 18, 42, and 55% for the 12, 8, 4, and 2-h cycle times, respectively. The PHB storage was increased as the length of the cycle time was decreased, and the ratio of the feast compared to the total cycle length was increased from around 13 to 33% for the 12 and 2-h cycle times, respectively.

Bioelectricity generation in continuously-fed microbial fuel cell: effects of anode electrode material and hydraulic retention time.

The main aim of this study is to investigate the bioelectricity production in continuously-fed dual chambered microbial fuel cell (MFC). Initially, MFC was operated with different anode electrode material at constant hydraulic retention time (HRT) of 2d to evaluate the effect of electrode material on electricity production. Pt electrode yielded about 642 mW/m(2) power density, which was 4 times higher than that of the MFC with the mixed metal oxide titanium (Ti-TiO2). Further, MFC equipped with Pt electrode was operated at varying HRT (2-0.5d). The power density generation increased with decreasing HRT, corresponding to 1313 mW/m(2) which was maximum value obtained during this study. Additionally, decreasing HRT from 2 to 0.5d resulted in increasing effluent dissolved organic carbon (DOC) concentration from 1.92 g/L to 2.23 g/L, corresponding to DOC removal efficiencies of 46% and 38%, respectively.

Treatment of azo dye-containing synthetic textile dye effluent using sulfidogenic anaerobic baffled reactor.

This study aims at investigating azo dye reduction performance of a sulfidogenic anaerobic baffled reactor (ABR) for around 400 days. ABR was operated at 30 °C in a temperature-controlled room and hydraulic retention time (HRT) was kept constant at 2 days. The robustness of ABR was assessed under varying azo dye loadings and COD/sulfate ratios. Additionally, oxygen was supplied (1-2 L air/m(3)reactor min) to the last compartment to investigate the removal of azo dye breakdown products. ABR performed well in terms of COD, sulfate and azo dye removals throughout the reactor operation. Maximum azo dye, COD and sulfate removals were 98%, 98% and 93%, respectively, at COD/sulfate ratio of 0.8. Aeration created different redox conditions in last compartment, which enhanced the removal of COD and breakdown products. The adverse effects of aeration on azo dye reduction were eliminated thanks to the compartmentalized structure of the ABR.