Durasphere® EXP: a non-biodegradable agent for treatment of primary Vesico-Ureteral reflux in children

ABSTRACT Introduction: Durasphere® EXP (DEXP) is a compound of biocompatible and non--biodegradable particles of zirconium oxide covered with pyrolytic carbon. The aim of this study is to evaluate the durability of off-label use of DEXP in the treatment of primary vesicoureteral reflux in children. Materials and Methods: Patients who underwent subureteric injection of DEXP for the correction of primary VUR were retrospectively reviewed. Patients aged >18 years as well as those who had grade-I or -V VUR, anatomic abnormalities (duplicated system, hutch diverticulum), neurogenic bladder or treatment refractory voiding dysfunction were excluded. Radiologic success was defined as the resolution of VUR at the 3rd month control. Success was radiographically evaluated at the end of the first year. Results: Thirty-eight patients (9 boys, 29 girls; mean age, 6.3±2.7 years) formed the study cohort. Forty-six renal units received DEXP (grade II: 22; grade III: 18; grade IV: 6). Mean volume per ureteric orifice to obtain the mound was 0.70±0.16mL. First con- trol VCUG was done after 3 months in all patients. After the first VCUG, 6 patients had VUR recurrence. Short-term radiologic success of DEXP was 84.2%. Rate of radiologic success at the end of the first year was 69.4% (25/32). Lower age (p:0.006) and lower amount of injected material (p:0.05) were associated with higher success rates at the end of 1 year. Conclusion: This is the first study to assess the outcomes of DEXP for treatment of primary VUR in children. After 1 year of follow-up, DEXP had a 69.4% success rate.

Durasphere® EXP: a non-biodegradable agent for treatment of primary Vesico-Ureteral reflux in children.

INTRODUCTION: Durasphere® EXP (DEXP) is a compound of biocompatible and non-biodegradable particles of zirconium oxide covered with pyrolytic carbon. The aim of this study is to evaluate the durability of off-label use of DEXP in the treatment of primary vesicoureteral reflux in children. MATERIALS AND METHODS: Patients who underwent subureteric injection of DEXP for the correction of primary VUR were retrospectively reviewed . Patients aged >18 years as well as those who had grade-I or -V VUR, anatomic abnormalities (duplicated system, hutch diverticulum), neurogenic bladder or treatment refractory voiding dysfunction were excluded. Radiologic success was defined as the resolution of VUR at the 3rd month control. Success was radiographically evaluated at the end of the first year. RESULTS: Thirty-eight patients (9 boys, 29 girls; mean age, 6.3±2.7 years) formed the study cohort. Forty-six renal units received DEXP (grade II: 22; grade III: 18; grade IV: 6). Mean volume per ureteric orifice to obtain the mound was 0.70±0.16mL. First control VCUG was done after 3 months in all patients. After the first VCUG, 6 patients had VUR recurrence. Short-term radiologic success of DEXP was 84.2%. Rate of radiologic success at the end of the first year was 69.4% (25/32). Lower age (p:0.006) and lower amount of injected material (p:0.05) were associated with higher success rates at the end of 1 year. CONCLUSION: This is the first study to assess the outcomes of DEXP for treatment of primary VUR in children. After 1 year of follow-up, DEXP had a 69.4% success rate.

An unanswered question in pediatric urology: the post pubertal persistence of prepubertal congenital penile curvature correction by tunical plication

ABSTRACT Objective: The aim of this study is to analyze post pubertal results of pre pubertal tunica albuginea plication with non-absorbable sutures in the correction of CPC. Materials and Methods: The files of patients who underwent tunica albuginea plication without incision (dorsal/lateral) were retrospectively reviewed. Patients younger than 13 years of age at the time of operation and older than 14 years of age in November 2015 were included. Patients with a penile curvature of less than 30 degrees & more than 45 degrees and penile/urethral anomalies were excluded. All of the patients underwent surgery followed by circumcision. Results: The mean age of patients at the time of the operation was 9.7 years (range, 6-13 years). The mean degree of ventral penile curvature measured during the operation was 39 degrees while it was 41 degrees in the lateral curvatures. All of the patients were curvature-free at the end of the operation. At the time of the follow-up examination, the mean age was 16.7 years (range, 14-25 years). Six patients had a straight (0-10 degrees) penis during erection and seven patients had recurrent penile curvatures ranging from 30 to 50 degrees. Conclusion: Pre pubertal tunica albuginea plication of congenital penile curvature (30-45 degrees) with non-absorbable sutures performed without incision is a minimal invasive method especially when performed during circumcision. However, recurrence might be observed in half of the patients after puberty.

An unanswered question in pediatric urology: the post pubertal persistence of prepubertal congenital penile curvature correction by tunical plication.

OBJECTIVE: The aim of this study is to analyze post pubertal results of pre pubertal tunica albuginea plication with non-absorbable sutures in the correction of CPC. MATERIALS AND METHODS: The files of patients who underwent tunica albuginea plication without incision (dorsal/lateral) were retrospectively reviewed. Patients younger than 13 years of age at the time of operation and older than 14 years of age in November 2015 were included. Patients with a penile curvature of less than 30 degrees & more than 45 degrees and penile/urethral anomalies were excluded. All of the patients underwent surgery followed by circumcision. RESULTS: The mean age of patients at the time of the operation was 9.7 years (range, 6-13 years). The mean degree of ventral penile curvature measured during the operation was 39 degrees while it was 41 degrees in the lateral curvatures. All of the patients were curvature-free at the end of the operation. At the time of the follow-up examination, the mean age was 16.7 years (range, 14-25 years). Six patients had a straight (0-10 degrees) penis during erection and seven patients had recurrent penile curvatures ranging from 30 to 50 degrees. CONCLUSION: Pre pubertal tunica albuginea plication of congenital penile curvature (30-45 degrees) with non-absorbable sutures performed without incision is a minimal invasive method especially when performed during circumcision. However, recurrence might be observed in half of the patients after puberty.

Impact of personalized three-dimensional (3D) printed pelvicalyceal system models on patient information in percutaneous nephrolithotripsy surgery: a pilot study

ABSTRACT Objective To investigate the impact of personalized three dimensional (3D) printed pelvicalyceal system models on patient information before percutaneous nephrolithotripsy surgery. Material and Methods Patients with unilateral complex renal stones with indicatation of percutaneous nephrolithotripsy surgery were selected. Usable data of patients were obtained from CT scans as Digital Imaging and Communications in Medicine (DICOM) format. Mimics software version 16.0 (Materialise, Belgium) was used for segmentation and extraction of pelvicalyceal systems. DICOM format were converted to Stereolithography file format. Finally, fused deposition modeling was used to create plasticine 3D models of pelvicalyceal systems. A questionnaire was designed for patients to assess personalized 3D models effect on patient’s understanding their conditions before percutaneous nephrolithotripsy surgery (PCNL). The day before surgery, each patient was seen by a urologist to deliver information about surgery. Questionnaire forms were asked to patients complete before and after presentation of 3D models and the results of the questions were compared. Results Five patient’s anatomically accurate models of the human renal collecting system were successfully generated. After the 3D printed model presentation, patients demonstrated an improvement in their understanding of basic kidney anatomy by 60% (p=0.017), kidney stone position by 50% (p=0.02), the planned surgical procedure by 60% (p=0.017), and understanding the complications related to the surgery by 64% (p=0.015). In addition, overall satisfaction of conservation improvement was 50% (p=0.02). Conclusion Generating kidney models of PCSs using 3D printing technology is feasible, and understandings of the disease and the surgical procedure from patients were well appreciated with this novel technology.

Impact of personalized three-dimensional -3D- printed pelvicalyceal system models on patient information in percutaneous nephrolithotripsy surgery: a pilot study.

OBJECTIVE: To investigate the impact of personalized three dimensional (3D) printed pelvicalyceal system models on patient information before percutaneous nephrolithotripsy surgery. MATERIAL AND METHODS: Patients with unilateral complex renal stones with indicatation of percutaneous nephrolithotripsy surgery were selected. Usable data of patients were obtained from CT scans as Digital Imaging and Communications in Medicine (DICOM) format. Mimics software version 16.0 (Materialise, Belgium) was used for segmentation and extraction of pelvicalyceal systems. DICOM format were converted to Stereolithography file format. Finally, fused deposition modeling was used to create plasticine 3D models of pelvicalyceal systems. A questionnaire was designed for patients to assess personalized 3D models effect on patient's understanding their conditions before percutaneous nephrolithotripsy surgery (PCNL). The day before surgery, each patient was seen by a urologist to deliver information about surgery. Questionnaire forms were asked to patients complete before and after presentation of 3D models and the results of the questions were compared. RESULTS: Five patient's anatomically accurate models of the human renal collecting system were successfully generated. After the 3D printed model presentation, patients demonstrated an improvement in their understanding of basic kidney anatomy by 60% (p=0.017), kidney stone position by 50% (p=0.02), the planned surgical procedure by 60% (p=0.017), and understanding the complications related to the surgery by 64% (p=0.015). In addition, overall satisfaction of conservation improvement was 50% (p=0.02). CONCLUSION: Generating kidney models of PCSs using 3D printing technology is feasible, and understandings of the disease and the surgical procedure from patients were well appreciated with this novel technology.