Repair vs. replacement: Selection of the best end-of-life scenario for small household electric and electronic equipment based on life cycle assessment.

This study presents a methodology designed for selecting, from an environmental point of view, the best end-of-life scenario for electric and electronic equipment which breaks before the end of its life span. To this end, the environmental impact of the life cycle of the equipment is evaluated for two different end-of-life scenarios: repair & reuse vs. replacement. As a case study, the proposed methodology is applied to a representative sample of nine categories of small household electric and electronic equipment (120 appliances). Repair & reuse scenarios consider the life span and the typical failures and repairs associated with each electric and electronic equipment category and the use of the repaired equipment until the remaining life span after its breakage. Replacement scenarios also consider the life span associated to each electric and electronic equipment category and the replacement of the broken equipment by an equivalent during the remaining life span after its breakage. The environmental impact obtained for both scenarios for each small household electric and electronic equipment category is compared in order to identify the best end-of-life scenario. To do so, the life cycle assessment methodology is applied, using CML and ReCiPe as midpoint- and endpoint-impact assessment methods, respectively. The results indicate that for all the analysed categories, the repair & reuse scenarios generally prove environmentally better than replacement scenarios, as Directive 2012/19/EU promotes. However, for some types of failure, e.g. those related to motors or printed circuit boards, if the failure occurs at the end of its life span, replacement is a better option than repair & reuse, since the environmental impact of the repair activities is not offset by the environmental benefits of extending the useful life until the end of the life span.

Identifying design guidelines to meet the circular economy principles: A case study on electric and electronic equipment.

This study presents a methodology that allows the analysis of how an existing product design meets the design guidelines required from the circular economy perspective, and which are the design guidelines that would need to be incorporated into its design to become a better circular design product. For that, as a starting point, the design guidelines required for the circular product design have been identified from an extensive literature review. Then, criteria have been defined to measure the margin of improvement of a product design based on the level of compliance of each circular design guideline, and the relevance of each circular design guideline for the specific product category to which it belongs. Finally, the methodology has been applied to a representative sample of 127 appliances belonging to different categories of small household electrical and electronic equipment. The circular design guidelines related to extending life span and to product/components reuse have been identified as those that more urgently need to be incorporated, while the urgency of those related to connectors or product structure is moderate.

A survey on consumers' attitude towards storing and end of life strategies of small information and communication technology devices in Spain.

This study analyses the current habits and practices towards the store, repair and second-hand purchase of small electrical and electronic devices belonging to the category of information and communication technology (ICT). To this end, a survey was designed and conducted with a representative sample size of 400 individuals through telephone interviews for the following categories: MP3/MP4, video camera, photo camera, mobile phone, tablet, e-book, laptop, hard disk drive, navigator-GPS, radio/radio alarm clock. According to the results obtained, there is a tendency to store disused small ICT devices at home. On average for all the small ICT categories analysed, 73.91% of the respondents store disused small ICT devices at home. Related to the habits towards the repair and second-hand purchase of small ICT devices, 65.5% and 87.6% of the respondents have never taken to repair and have never purchased second-hand, respectively, small ICT devices. This paper provides useful and hitherto unavailable information about the current habits of discarding and reusing ICT devices. It can be concluded that there is a need to implement awareness-raising campaigns to encourage these practices, which are necessary to reach the minimum goals established regarding preparation for reuse set out in the Directive 2012/19/EU for the category small electrical and electronic equipment.

Attitude of the stakeholders involved in the repair and second-hand sale of small household electrical and electronic equipment: Case study in Spain.

The European legal framework for Electrical and Electronic Equipment (EEE) and Waste Electrical and Electronic Equipment (WEEE) (Directive 2012/19/EU) prioritises reuse strategies against other valorisation options. Along these lines, this paper examines the awareness and perceptions of reusing small household EEE from the viewpoint of the different stakeholders involved in its end-of-life: repair centres, second-hand shops and consumers. Direct interviews were conducted in which an intended survey, designed specifically for each stakeholder, was answered by a representative sample of each one. The results obtained from repair centres show that small household EEE are rarely repaired, except for minor repairs such as replacing cables, and that heaters, toasters and vacuum cleaners were those most frequently repaired. The difficulty of accessing cheap spare parts or difficulties during the disassembly process are the commonest problems observed by repair technicians. The results obtained from second-hand shops show that irons, vacuum cleaners and heaters are the small household EEE that are mainly received and sold. The results according to consumers indicate that 9.6% of them take their small household EEE to be repaired, while less than 1% has ever bought a second-hand small household EEE. The main arguments for this attitude are they thought that the repair cost would be similar to the price of a new one (for repairs), and hygiene and cleaning reasons (for second-hand sales).

Disassembly properties and material characterisation of household small waste electric and electronic equipment.

This paper is focused on characterising small waste electric and electronic equipment, specifically small household appliances, from two different points of views: disassembly properties and material identification. The sample for this characterisation was obtained from a selective collection campaign organised in Castellón de la Plana (Spain). A total amount of 833.7kg (749 units) of small waste electric and electronic equipment was collected, of which 23.3% by weight and 22.4% by units belonged to the subcategory household equipment. This subcategory, composed of appliances such as vacuum cleaners, toasters, sandwich makers, hand blenders, juicers, coffee makers, hairdryers, scales, irons and heaters, was first disassembled in order to analyse different aspects of the disassembly process for each equipment type: type of joints, ease of identification of materials, ease of access to joints for extracting components, ease of separation of components from the whole, uniformity of tools needed for the disassembly process and possibility of reassembly after disassembly. Results show that the most common joints used in these equipment types are snap-fits and screws, although some permanent joints have also been identified. Next, the material composition of each component of each appliance belonging to each equipment type was identified visually and with additional mechanical trials and testing. It can be observed that plastic and electric/electronic components are present in all the equipment types analysed and are also the material fractions that appear with higher percentages in the material composition: 41.1wt% and 39.1wt% for the plastic fraction and electric/electronic components, respectively. The most common plastics are: polypropylene (PP), acrylonitrile butadiene styrene (ABS) and polycarbonate (PC), while the most common electric/electronic components are: cable, plug and printed circuit boards. Results also show that disassembly properties and material characterisation vary widely from one equipment type to another.

Potential reuse of small household waste electrical and electronic equipment: Methodology and case study.

This study proposes a general methodology for assessing and estimating the potential reuse of small waste electrical and electronic equipment (sWEEE), focusing on devices classified as domestic appliances. Specific tests for visual inspection, function and safety have been defined for ten different types of household appliances (vacuum cleaner, iron, microwave, toaster, sandwich maker, hand blender, juicer, boiler, heater and hair dryer). After applying the tests, reuse protocols have been defined in the form of easy-to-apply checklists for each of the ten types of appliance evaluated. This methodology could be useful for reuse enterprises, since there is a lack of specific protocols, adapted to each type of appliance, to test its potential of reuse. After applying the methodology, electrical and electronic appliances (used or waste) can be segregated into three categories: the appliance works properly and can be classified as direct reuse (items can be used by a second consumer without prior repair operations), the appliance requires a later evaluation of its potential refurbishment and repair (restoration of products to working order, although with possible loss of quality) or the appliance needs to be finally discarded from the reuse process and goes directly to a recycling process. Results after applying the methodology to a sample of 87.7kg (96 units) show that 30.2% of the appliances have no potential for reuse and should be diverted for recycling, while 67.7% require a subsequent evaluation of their potential refurbishment and repair, and only 2.1% of them could be directly reused with minor cleaning operations. This study represents a first approach to the "preparation for reuse" strategy that the European Directive related to Waste Electrical and Electronic Equipment encourages to be applied. However, more research needs to be done as an extension of this study, mainly related to the identification of the feasibility of repair or refurbishment operations.