Maximizing Antioxidant Potential in Picual Virgin Olive Oil: Tailoring Agronomic and Technological Factors with Response Surface Methodology.

Over the past years, a prolonged drought has affected Spain, raising significant concerns across various sectors, especially agriculture. This extended period of dry weather is profoundly affecting the growth and development of olive trees, potentially impacting the quality and quantity of olive oil produced. This study aims to assess the impact of agronomic factors, i.e., olive maturation and irrigation management, as well as the technological factors involved in the production process, on the antioxidant content of Picual virgin olive oil. Mathematical models were developed to maximize the concentration of polyphenols, orthodiphenols, chlorophylls, carotenes, and tocopherols in olive oils. Findings indicate that increasing the malaxation temperature from 20 to 60 °C and reducing the mixing time from 60 to 20 min positively influenced the polyphenol and orthodiphenol content. Although irrigation did not significantly affect the polyphenols, pigments, and α-tocopherol contents, it may enhance the ß- and γ-tocopherol content. Optimal conditions for producing antioxidant-enriched virgin olive oils involved olives from rainfed crops, with a moisture index of 3-4, and a 60-min malaxation process at 60 °C. Under these conditions, the total phenol content doubled, pigment content increased fourfold, and α-tocopherol content rose by 15%. These findings provide relevant knowledge to interpret the year-to-year variation in both organoleptic and analytical profiles of virgin olive oils.

Hydrophobization of Cold Plasma Activated Glass Surfaces by Hexamethyldisilazane Treatment.

The objective of this study was to investigate the modification of glass surfaces by the synergistic combination of cold plasma and chemical surface modification techniques. Glass surface hydrophobicity was obtained as a result of various plasma and deposition operational conditions. The mechanisms governing the hydrophobization process were also studied. Glass plates were activated with plasma using different gases (oxygen and argon) at different treatment times, ranging from 30 to 1800 s. Then, the plasma-treated surfaces were exposed to hexamethyldisilazane vapors at different temperatures, i.e., 25, 60, and 100 °C. Complete characterization, including contact angle measurements, surface free energy calculations, 3D profilometry, X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy, was accomplished. It was found that the extent of the hydrophobicity effect depends on both the plasma pre-treatment and the specific conditions of the hexamethyldisilazane deposition process. Plasma activation led to the formation of active sites on the glass surface, which promoted the adsorption and reaction of hexamethyldisilazane species, thereby inducing surface chemical modification. Longer plasma pre-treatment resulted in stronger modification on the glass surface, resulting in changes in the surface roughness. The largest water contact angle of ≈100° was obtained for the surface activated by argon plasma for 1800 s and exposed to hexamethyldisilazane vapors at 25 °C. The changes in the surface properties were caused by the introduction of the hydrophobic trimethylsilyl groups onto the glass surface as well as roughness development.

Hydrocolloids of Egg White and Gelatin as a Platform for Hydrogel-Based Tissue Engineering.

Innovative materials are needed to produce scaffolds for various tissue engineering and regenerative medicine (TERM) applications, including tissue models. Materials derived from natural sources that offer low production costs, easy availability, and high bioactivity are highly preferred. Chicken egg white (EW) is an overlooked protein-based material. Whilst its combination with the biopolymer gelatin has been investigated in the food technology industry, mixed hydrocolloids of EW and gelatin have not been reported in TERM. This paper investigates these hydrocolloids as a suitable platform for hydrogel-based tissue engineering, including 2D coating films, miniaturized 3D hydrogels in microfluidic devices, and 3D hydrogel scaffolds. Rheological assessment of the hydrocolloid solutions suggested that temperature and EW concentration can be used to fine-tune the viscosity of the ensuing gels. Fabricated thin 2D hydrocolloid films presented globular nano-topography and in vitro cell work showed that the mixed hydrocolloids had increased cell growth compared with EW films. Results showed that hydrocolloids of EW and gelatin can be used for creating a 3D hydrogel environment for cell studies inside microfluidic devices. Finally, 3D hydrogel scaffolds were fabricated by sequential temperature-dependent gelation followed by chemical cross-linking of the polymeric network of the hydrogel for added mechanical strength and stability. These 3D hydrogel scaffolds displayed pores, lamellae, globular nano-topography, tunable mechanical properties, high affinity for water, and cell proliferation and penetration properties. In conclusion, the large range of properties and characteristics of these materials provide a strong potential for a large variety of TERM applications, including cancer models, organoid growth, compatibility with bioprinting, or implantable devices.

Co-Gelation of Pumpkin-Seed Protein with Egg-White Protein.

The aim of this study was to investigate the gelation process of binary mixes of pumpkin-seed and egg-white proteins. The substitution of pumpkin-seed proteins with egg-white proteins improved the rheological properties of the obtained gels, i.e., a higher storage modulus, lower tangent delta, and larger ultrasound viscosity and hardness. Gels with a larger egg-white protein content were more elastic and more resistant to breaking structure. A higher concentration of pumpkin-seed protein changed the gel microstructure to a rougher and more particulate one. The microstructure was less homogenous, with a tendency to break at the pumpkin/egg-white protein gel interface. The decrease in the intensity of the amide II band with an increase in the pumpkin-seed protein concentration showed that the secondary structure of this protein evolved more toward a linear amino acid chain compared with the egg-white protein, which could have an impact on the microstructure. The supplementation of pumpkin-seed proteins with egg-white proteins caused a decrease in water activity from 0.985 to 0.928, which had important implications for the microbiological stability of the obtained gels. Strong correlations were found between the water activity and rheological properties of the gels; an improvement of their rheological properties resulted in a decrease in water activity. The supplementation of pumpkin-seed proteins with egg-white proteins resulted in more homogenous gels with a stronger microstructure and better water binding.

The Effect of Erythritol on the Physicochemical Properties of Reformulated, High-Protein, and Sugar-Free Macarons Produced from Whey Protein Isolate Intended for Diabetics, Athletes, and Physically Active People.

This study reports the possibility of obtaining sugar-free WPI-based macarons with erythritol addition. The whey protein isolate (WPI) solution (20%, w/v) was whipped, and erythritol was added to the foam at concentrations of 20, 40, and 60 g, with 125 g of almond flour. The rheological properties (τ, G', G″, and tan (δ)) and stability of the macaron batters before baking were evaluated. In order to produce the macarons, the batters were solidified at 147 °C for 12 min. The textural and surface properties (roughness and color), as well as the microstructures and water activities, were determined for the macarons. It was feasible to produce macarons over the entire range of the tested erythritol content. Even the smallest amount of erythritol (20 g) facilitated the preservation of the macaron structure. The medium erythritol concentration (40 g) improved the stability of the batters and their rheology and was the most effective for air pocket stabilization during baking; however, its largest addition (60 g) resulted in an increase in the final macaron volume. The increased erythritol addition improved mechanical properties and shelf life, producing a smoothing effect on the macaron surfaces and having a significant effect on their color co-ordinates.

Influence of Farming System and Forecrops of Spring Wheat on Protein Content in the Grain and the Physicochemical Properties of Unsonicated and Sonicated Gluten.

The potential for enhancing the spring wheat protein content by different cultivation strategies was explored. The influence of ultrasound on the surface and rheological properties of wheat-gluten was also studied. Spring wheat was cultivated over the period of 2018-2020 using two farming systems (conventional and organic) and five forecrops (sugar beet, spring barley, red clover, winter wheat, or oat). The obtained gluten was sonicated using the ultrasonic scrubber. For all organically grown wheat, the protein content was higher than for the conventional one. There was no correlation between the rheological properties of gluten and the protein content in the grain. Gluten derived from organically grown wheat was more elastic than those derived from the conventional one. Sonication enhanced the elasticity of gluten. The sonication effect was influenced by the forecrops. The most elastic gluten after sonication was found for organic barley and sugar beet. The lowest values of tan (delta) were noted for conventional wheat and conventional oat. Cultivation in the monoculture gave gluten with a smaller susceptibility to increase elasticity after sonic treatment. Sonication promoted the cross-linking of protein molecules and induced a more hydrophobic character, which was confirmed by an increment in contact angles (CAs). Most of the organically grown wheat samples showed a lower CA than the conventional ones, which indicated a less hydrophobic character. The gluten surface became rougher with the sonication, regardless of the farming system and applied forecrops. Sonication treatment of gluten proteins rearranged the intermolecular linkages, especially disulfide and hydrophobic bonds, leading to changes in their surface morphology.