The Evaluation of Cellulose Acetate Capsules Functionalized for the Removal of Cd(II).

Cellulose acetate is derived from cellulose and has the characteristics of biodegradability and reusability. So, it has been used for the elimination of toxic compounds capable of producing different diseases, such as cadmium, that result from human and industrial activity. For this reason, capsules functionalized with Cyanex 923 were prepared and characterized by FTIR spectroscopy, Energy Dispersive X-ray Spectroscopy (EDX), and SEM. The functionalized capsules were used for removing and recovering Cd(II) by modifying variables such as HCl concentration in the extraction medium and carrier content in the capsules, among others. The extraction of cadmium from battery leachates and the three isotherm models, Langmuir, Freundlich, and Dubinin Radushkevich, were also tested to model the cadmium removal process. The results showed a favorable physical sorption with a good capacity for extraction and the possibility of reusing the capsules for up to seven cycles without a decrease in the percentage of cadmium recovery.

Modified Polysulfone Nanofibers for the Extraction and Preconcentration of Lead from Aqueous Solutions.

Since lead is a highly toxic metal, it is necessary to detect its presence in different samples; unfortunately, analysis can be complicated if the samples contain concentrations below the detection limit of conventional analytical techniques. Solid phase extraction is a technique that allows the carrying out of a pre-concentration process and thus makes it easy to quantify analytes. This work studied the efficiency of sorption and preconcentration of lead utilizing polysulfone (PSf) fibers grafted with acrylic acid (AA). The best conditions for Pb(II) extraction were: pH 5, 0.1 mol L-1 of ionic strength, and 40 mg of sorbent (70% of removal). The sorbed Pb(II) was pre-concentrated by using an HNO3 solution and quantified using flame atomic absorption spectrometry. The described procedure was used to obtain a correlation curve between initial concentrations and those obtained after the preconcentration process. This curve and the developed methodology were applied to the determination of Pb(II) concentration in a water sample contained in a handmade glazed clay vessel. With the implementation of the developed method, it was possible to pre-concentrate and determine a leached Pb(II) concentration of 258 µg L-1.

Evaluation of the Hybrid Membrane of ZnO Particles Supported in Cellulose Acetate for the Removal of Lead.

Water polluted by discarded heavy metals such as lead is creating a global pollution problem. In this work, adsorption of Pb(II) was realized in batch studies by a hybrid membrane of cellulose acetate with ZnO particles. First, ZnO particles were prepared by precipitation and immobilized on the membrane. The hybrid membrane was elaborated by interfacial polymerization. The structure and surface were characterized based on Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Batch experiments were carried out under different conditions where the number of particles of ZnO present in the membrane and the pH of the aqueous solution were varied. The Langmuir and Freundlich isotherm models were evaluated in the best adsorption conditions. Data fitted well with a Langmuir model with a maximum adsorption capacity of 15.55 mg·g-1, which was similar for this type of materials. Thermodynamic parameters such as Gibbs free energy, enthalpy, and entropy showed that the process was spontaneous and favorable. The hybrid membrane was evaluated in simulated wastewater of the battery industry with a superior efficiency of up to 97%; without the medium, it did not generate interference. These results suggest that Pb(II) removal by hybrid membrane is possible.

Solid-Phase Extraction and Large-Volume Sample Stacking-Capillary Electrophoresis for Determination of Tetracycline Residues in Milk.

Solid-phase extraction in combination with large-volume sample stacking-capillary electrophoresis (SPE-LVSS-CE) was applied to measure chlortetracycline, doxycycline, oxytetracycline, and tetracycline in milk samples. Under optimal conditions, the proposed method had a linear range of 29 to 200 µg·L-1, with limits of detection ranging from 18.6 to 23.8 µg·L-1 with inter- and intraday repeatabilities < 10% (as a relative standard deviation) in all cases. The enrichment factors obtained were from 50.33 to 70.85 for all the TCs compared with a conventional capillary zone electrophoresis (CZE). This method is adequate to analyze tetracyclines below the most restrictive established maximum residue limits. The proposed method was employed in the analysis of 15 milk samples from different brands. Two of the tested samples were positive for the presence of oxytetracycline with concentrations of 95 and 126 µg·L-1. SPE-LVSS-CE is a robust, easy, and efficient strategy for online preconcentration of tetracycline residues in complex matrices.

Determination of oxytetracycline in milk samples by polymer inclusion membrane separation coupled to high performance liquid chromatography.

The determination of oxytetracycline in milk samples using a polymer inclusion membrane concept with high performance liquid chromatography (HPLC) was studied. The membranes developed are composed by cellulose acetate as polymer base, Cyanex 923 as carrier and o-nitrophenyl octyl ether as plasticizer. In the optimal conditions, the method exhibits good linearity in the range 0.03-0.20 mg L(-1) with a limit of detection and quantification of 8.2 and 27.3 µg L(-1) respectively. The method was successfully applied to the analysis of milk samples with high selectivity.