Rheological Properties of MWCNT-Doped Titanium-Oxo-Alkoxide Gel Materials for Fiber Drawing.

A strategy of doping by multi-walled carbon nanotubes (MWCNT) to enhance mechanical strength and the electrical conductivity of ceramic fibers has nowadays attracted a great deal of attention for a wide variety of industrial applications. This study focuses on the effect of MWCNTs on rheological properties of metal alkoxide precursors used for the preparation of nanoceramic metal oxide fibers. The rheological behavior of MWCNT-loaded titanium alkoxide sol precursors has been evaluated via an extensional rheometry method. A substantial decrease in elongational viscosity and relaxation time has been observed upon an introduction of MWCNTs even of low concentrations (less than 0.1 wt.%). A high quality MWCNT/nanoceramic TiO2 composite fibers drawn from the specified precursors has been validated. The MWCNT percolation, which is mandatory for electrical conductivity (50 S/m), has been achieved at 1 wt.% MWCNT doping.

Fibroblast growth on micro- and nanopatterned surfaces prepared by a novel sol-gel phase separation method.

Physical characteristics of the growth substrate including nano- and microstructure play crucial role in determining the behaviour of the cells in a given biological context. To test the effect of varying the supporting surface structure on cell growth we applied a novel sol-gel phase separation-based method to prepare micro- and nanopatterned surfaces with round surface structure features. Variation in the size of structural elements was achieved by solvent variation and adjustment of sol concentration. Growth characteristics and morphology of primary human dermal fibroblasts were found to be significantly modulated by the microstructure of the substrate. The increase in the size of the structural elements, lead to increased inhibition of cell growth, altered morphology (increased cytoplasmic volume), enlarged cell shape, decrease in the number of filopodia) and enhancement of cell senescence. These effects are likely mediated by the decreased contact between the cell membrane and the growth substrate. However, in the case of large surface structural elements other factors like changes in the 3D topology of the cell's cytoplasm might also play a role.

Alkoxide-based precursors for direct drawing of metal oxide micro- and nanofibres.

The invention of electrospinning has solved the problem of producing micro- and nanoscaled metal oxide fibres in bulk quantities. However, until now no methods have been available for preparing a single nanofibre of a metal oxide. In this work, the direct drawing method was successfully applied to produce metal oxide (SnO2, TiO2, ZrO2, HfO2 and CeO2) fibres with a high aspect ratio (up to 10 000) and a diameter as small as 200 nm. The sol-gel processing includes consumption of precursors obtained from alkoxides by aqueous or non-aqueous polymerization. Shear thinning of the precursors enables pulling a material into a fibre. This rheological behaviour can be explained by sliding of particles owing to external forces. Transmission (propagation) of light along microscaled fibres and their excellent surface morphology suggest that metal oxide nanofibres can be directly drawn from sol precursors for use in integrated photonic systems.