Single-run capillary electrophoretic determination of inorganic nitrogen species in rainwater.

A capillary electrophoretic (CE) method for the simultaneous determination of nitrate, nitrite, and ammonium ions has been developed. Direct (NO3-, NO2-) and indirect (NH4+) UV detection at 214 nm in conjunction with electromigration sampling from both ends of the capillary was used. The optimized separations were carried out in 10 mmol/L imidazole sulfate, 2 mmol/L 18-crown-6, and 0.02 mmol/L tetradecyltrimethylammonium hydroxide electrolyte (pH 4.0). The method permits excellent separation of three nitrogen species in only 4 min. A 1 x 10(-4) mol/L KBr solution was used as an internal standard to limit possible electrokinetic injection biases. Experimental results showed that the use of an anionic internal standard for cationic analytes and vice versa gives only slightly better precision than analysis with no internal standard. Using Br- internal standard for NO3- and NO2- ions and K+ for NH4+, peak area RSD values decrease significantly. The proposed system was applied to the speciation of inorganic nitrogen ions in rainwater samples. The recovery tests established for external calibration and standard addition techniques using one or two internal standards were within the range 100 +/- 10%. The CE results agree with those obtained by spectrophotometric methods.

Capillary electrophoretic determination of sulfite using the zone-passing technique of in-capillary derivatization.

A new capillary electrophoretic (CE) method was developed for the simple and selective determination of sulfite. The proposed method is based on the in-capillary derivatization of sulfite with iodine using the zone-passing technique and direct UV detection of iodide formed. The optimal conditions for the separation and derivatization reaction were established by varying concentration of iodine, electrolyte pH and applied voltage. The optimised separations were carried out in 20 mmol l(-1) Tris-HCl electrolyte (pH 8.5) using direct UV detection at 214 nm. Experimental results showed that the injection of the iodine zone from anodic end of the capillary gives significantly better precision. Common UV absorbing anions such as Br-, l-, S2O3(2-), NO3-, NO2-, SCN- did not give any interferences. Valid calibration (r2=0.998) is demonstrated in the range 1 x 10(-5) - 8 x 10(-4) mol l(-1) of sulfite. The detection limit (SIN=3) was 2 x 10(-6) mol l(-1). The proposed system was applied to the determination of free sulfite in wines. The recovery tests established for wine samples were within the range 92-103%. The CE results were compared with those obtained by iodometric titration technique.

Capillary electrophoretic determination of thiosulfate and its oxidation products.

Capillary electrophoresis (CE) was developed for the rapid and simple determination of thiosulfate and its oxidation products such as common polythionates, sulfite and sulfate. Direct and indirect UV detection techniques were investigated. The optimized separations of UV absorbing S2O3(2-), S4O6(2-), S5O6(2-) and S6O6(2-) anions were carried out in 5 mmol l(-1) (NH4)2SO4, 5 mmol l(-1) KH2PO4 electrolyte at pH 5.0, with direct UV detection at 214 nm. All analytes were well resolved in less than 4 min. Analysis of S2O3(2-), S4O6(2-), SO4(2-) and SO3(2-) ions can be performed in 5 mmol l(-1) H2CrO4, 1 mmol l(-1) hexamethonium hydroxide electrolyte neutralized with triethanolamine to pH 8.0, using indirect UV detection at 254 nm. However, the detection sensitivity for tetrathionate was poor. Other polythionates can not be detected at all because of their high absorbance even at 254 nm. The developed CE method was applied for the monitoring of sulfur species in spent fixing solutions during the electrolytic oxidation.

Rapid analysis of cation constituents of urine by capillary electrophoresis.

Capillary electrophoresis was applied for the simultaneous determination of K(+), NH(4)(+), Na(+), Ca(2+) and Mg(2+) cations in urine. The separations were carried out in electrolyte containing 7. 5 mmol/l copper(II) acetate, 15 mmol/l ethylenediamine and 2 mmol/l triethanolamine at pH 8.0, with indirect UV detection at 230 nm. All cations were well separated in less than 4 min. The results obtained by this method were comparable with ion chromatography. The proposed system is simple, rapid and does not require any preliminary treatment of the urine samples except diluting.

On-line preconcentration and determination of chromium(VI) in waters by high-performance liquid chromatography using precolumn complexation with 1,5-diphenylcarbazide.

A method for on-line chromatographic preconcentration and determination of chromium(VI) traces has been developed. Chromate was preconcentrated on a C18 column (50 x 6 mm I.D.) after complexation with diphenylcarbazide (DPC). Following the preconcentration step, analysis of the sample was performed using a C18 column (100 x 6 mm I.D.) with an eluent containing 6.10(-3) mol/l sulphuric acid and 20% (v/v) acetonitrile. Direct spectrophotometric detection at 546 nm was used. Experimental parameters such as mobile phase pH, DPC concentration, preconcentration flow-rate, sample volume were optimized for preconcentration and detection of Cr(VI)-DPC complex. Under the optimum conditions, most metal ions [Cr(III), Fe(III), Cu(II), Hg(II), Mo(VI), V(V)] and inorganic anions did not interfere. A detection limit of 0.02 ng/ml Cr(VI) can be attained when a sample volume of 100 ml is used. The technique has been applied successfully to the determination of Cr(VI) traces in drinking, surface and groundwater samples and the recoveries of added chromium were in the range 94-104%.

Simultaneous determination of inorganic anions and cations in waters by capillary electrophoresis.

The applicability of a recently proposed capillary electrophoresis technique based on the electromigrative sample introduction from both ends of the capillary was further investigated for the simultaneous determination of inorganic anions and cations in real water samples. The optimized separations were carried out in 5.0 mmol l-1 copper(II)-ethylenediaminehydroxide and 2.0 mmol l-1 triethanolamine electrolyte neutralized with chromic acid to pH 8.0, using indirect UV detection at 254 nm. Nine inorganic ions (Cl-, NO3-, SO4(2-), HCO3-, K+, NH4+, Na+, Ca2+ and Mg2+) were well separated in less than 5 min. The analytical performance of the method is discussed in terms of migration time, peak area and corrected peak area repeatability, linearity of response and detection limits. To evaluate this system, the determination of anions and cations was examined for mineral water, tap water and river water samples using Li+ as the internal standard. The comparison of the results with ion chromatography and conventional capillary electrophoresis is presented.

Speciation of Cr(III) and Cr(VI) and separation of common anions by ion pair chromatography with trans-1,2-diaminecyclohexane-N,N,N',N'-tetraacetic acid.

A reversed phase ion pair chromatographic method for the simultaneous determination of Cr species and common anions on a C(18)-bonded stationary phase was developed by using acetonitrile-water (2:98 v/v) containing 1.0 mM tetrabutylammonium hydroxide and 0.5 mM trans-1,2-diaminecyclohexane-N,N,N',N'-tetraacetic acid (DCTA) at pH 6.5 as mobile phase and UV-detection at 210 nm. Chromatographic parameters were optimized for separation of Cr(III)-DCTA complex, chromate and other anions. The detection limits were found as 8 ng/ml for Cr(III) and 35 ng/ml for Cr(VI). Under the optimum conditions, most other ions did not interfere. The method can be applied to separate a number of common anions simultaneously with the separation of Cr(III) and Cr(VI).

Ion-pair chromatographic determination of chromium(VI).

Ion-pair chromatography (IPC) with conductometric detection was investigated as a precise and selective analytical method for the determination of chromium in electro-plating solutions and waste waters. Chromatographic parameters were optimized for separation of Cr(VI) and SO(2-)(4). The analytical column (100 x 6 mm) was packed with 10 mum silasorb C(18) (Czechoslovakia). Tetrabutylammonium butyrate (TBAB), at pH 7.0 in acetonitrile-water (18:82 v/v) mixture, was used as the eluent. Two samples of solution are taken for the analysis. In the first of them the amount of Cr(VI) is determined, in the second one Cr(III) is oxidized to Cr(VI) with H(2)O(2) in alkaline medium and the total amount of Cr is determined. From the difference of the two obtained results the concentration of Cr(III) is calculated. The detection limit of Cr(VI) is 0.1 mug/ml and the relative standard deviation (at the 1.0 mug/ml) is 4.0%. The IPC results for chromium agreed closely with these obtained by spectrophotometry.