Assessment of vulnerability to flood risk in the Padma River Basin using hydro-morphometric modeling and flood susceptibility mapping.

An evaluation of flood vulnerability is needed to identify flood risk locations and determine mitigation methods. This research introduces an integrated method combining hydro-morphometric modeling and flood susceptibility mapping to assess Padma River Basin's flood risk. Flood zoning, flooding classes, and resource flood risk were explicitly analyzed in this river basin study. Flood risk was calculated using GIS-based hydro-morphometric modeling. Using Horton's and Strahler's methods, drainage density, stream density, and stream order of the Padma River Basin were determined. The Padma River Basin has five sub-basins: A, B, C, D, and E, with stream densities of 0.53 km-2, 0.13 km-2, 0.25 km-2, 0.30 km-2, and 0.28 km-2 and drainage densities of 0.63 km-1, 0.16 km-1, 0.29 km-1, 0.35 km-1, and 0.33 km-1, respectively. Sub-basin A is the most prone to floods due to its high stream and drainage density, whereas B and C are the least susceptible. This study used elevation, TWI, slope, precipitation, NDVI, distance from road, drainage density, distance from river, LU/LC, and soil type to create a flood vulnerability map incorporating GIS and AHP with pair-wise comparison matrix (PCM). The study's flood zoning shows that the northeastern part of this basin is more likely to flood than the southwestern part due to its elevation and high-order streams. Moderate River Flooding, the region's most hazardous flood class, covers 48.19% of the flooding area, including 1078.30 km2 of agricultural land, 94.86 km2 of bare soil, 486.39 km2 of settlements, 586.42 km2 of vegetation cover, and 39.34 km2 of water bodies. The developed hydro-morphometric model, the flood susceptibility map, and the analysis of this data may be utilized to offer long-term advance alarm insight into areas potentially to be invaded by a flood catastrophe, boosting hazard mitigation and planning.

Adaptive cooling strategy via human hair: High optothermal conversion efficiency of solar radiation into thermal dissipation.

Natural species have developed complex nanostructures in a hierarchical pattern to control the absorption, reflection, or transmission of desired solar and infrared wavelengths. This bio-inspired structure is a promising method to manipulating solar energy and thermal management. In particular, human hair is used in this article to highlight the optothermal properties of bio-inspired structures. This study investigated how melanin, an effective solar absorber, and the structural morphology of aligned domains of keratin polymer chains, leading to a significant increase in solar path length, which effectively scatter and absorb solar radiation across the hair structure, as well as enhance thermal ramifications from solar absorption by fitting its radiative wavelength to atmospheric transmittance for high-yield radiative cooling with realistic human body thermal emission.

Angle-resolved plasmonic photocapacitance of gold nanorod dimers.

The assembly of nanostructures with plausible statistical orientations has provided the opportunity to correlate physical observables to develop a diverse range of niche applications. The dimeric configurations of gold nanorods have been chosen as atypical model systems to correlate optoelectronic with mechanical properties at a number of combinations of angular orientations. Metals are considered as conductors in electronics and reflectors in optics - therefore, metallic particles at the nanoscale exhibit unique optoelectronic characteristics that enable the design of materials to meet the demand of the modern world. Gold nanorods have often been adopted as prototypical anisotropic nanostructures owing to their excellent shape-selective plasmonic tunability in the vis-NIR region. When a pair of metallic nanostructures is sufficiently close to exhibit electromagnetic interaction, the evolution of collective plasmon modes, substantial enhancement of the near-field and strong squeezing of the electromagnetic energy at the interparticle spatial region of the dimeric nanostructures occur. The localised surface plasmon resonance energies of the nanostructured dimers strongly depend on the geometry as well as the relative configurations of the neighbouring particle pairs. Recent advances in the 'tips and tricks' guide have even made it possible to assemble anisotropic nanostructures in a colloidal dispersion. The optoelectronic characteristics of gold nanorod homodimers at different mutual orientations with statistical variation of the angle between 0 and 90° at particular interparticle distances have been elucidated from both theoretical and experimental perspectives. It has been observed that the optoelectronic properties are governed by mechanical aspects of the nanorods at different angular orientations of the dimers. Therefore, we have approached the design of an optoelectronic landscape through the correlation of the plasmonics and photocapacitance through the optical torque of gold nanorod dimers.

Radiative-Cooling Composites with Enhanced Infrared Emissivity by Structural Infrared Scattering through Indium Tin Oxide Nanoparticles in a Polymer Matrix.

Radiative cooling has attracted tremendous interest as it can tackle global warming by saving energy consumption in heating, ventilation, and air conditioning (HVAC) in buildings. Polymer materials play an important role in radiative cooling owing to their high infrared emissivity. Along this line, numerous studies on optically optimized geometries were carried out to enhance the selective wavelength absorption for high infrared emissivity; however, the polymer material itself relatively was not investigated and optimized enough. Herein, we investigate the infrared radiation (IR) absorption coefficient of various polymer types, and introduce a new concept of radiative-cooling composites. By dispersing the IR scattering medium in a polymer matrix, IR can be effectively scattered and attenuated by the polymer matrix. Indium tin oxide was utilized as the IR scattering medium in a cellulose acetate polymer matrix in this report. The window film was made with this composite and showed an effective cooling performance by outdoor thermal evaluation. This composite opens a new venue to endow materials with enhanced radiative-cooling property regardless of the polymer types.

Appraisal of stormwater-induced runoff quality influenced by site-specific land use patterns in the south-eastern region of Bangladesh.

Urban stormwater runoff is considered as one of the major contributors to nonpoint source that contributes to the pollution of all water resources in the surrounding environment. Pollutant concentrations of urban stormwater runoff are directly or indirectly linked with land use types in a catchment that is quite different in different places, and hence, site-specific studies are necessary, unless otherwise the modelling of runoff quality using modelling tools may not be rationally reflected the actual field scenarios. This paper portrays the influence of land use types on stormwater runoff physicochemical quality in Chattogram city, where land use's demarcation is often complicated due to the different natural and human-induced anthropogenic factors. The stormwater runoff samples were collected from the residential, commercial, institutional, and industrial land use types, in the city of Chattogram, Bangladesh, during the period from July to September 2020. The standard laboratory protocol for elemental concentrations and principal component analysis was performed in addition to basic statistics to identify the influence of urban surface characteristics on the quality of stormwater runoff. In general, pollutant concentrations were identified by analysing key physical and chemical quality parameters including colour, temperature, turbidity, total suspended solids (TSS), total dissolved solids (TDS), electrical conductivity (EC), salinity, pH, dissolved oxygen (DO), biochemical oxygen demand (BOD5), chemical oxygen demand (COD) and ammonia nitrogen (NH3-N) and exhibited 2 to 3 times higher concentrations than reported elsewhere. Furthermore, the present study reported the greater concentrations of few pollutants, such as TSS, BOD5, and EC, derived from the residential land uses compared to other land use types that are surprising; however, it confirmed the distinct complexity of unplanned land use patterns that should not be overlooked rather discussed. The strong correlation between land use types and stormwater runoff quality indicates the site-specific influences of runoff quality. The outcomes of this study would be particularly helpful in calibrating water quality models considering different land use types. Additionally, datasets and information obtained from this research will assist engineers and practitioners in developing decision-making tools for effective stormwater management.

Evaluating knowledge, awareness and associated water usage towards hand hygiene practices influenced by the current COVID-19 pandemic in Bangladesh.

Hand hygiene is considered as one of the most effective ways for preventing transmissible diseases, especially for preventing virus-borne diseases. The study has been conducted to evaluate changes in knowledge, awareness and practices of hand hygiene due to the outbreak of the coronavirus disease (COVID-19) in Bangladesh. The potential factors influencing human behaviours for maintaining hand hygiene have also been explored. Moreover, a probable increase in daily water demand associated with the changed situation has been assessed. An online survey was performed among a total of 367 Bangladeshi residents about their practices of hand hygiene during pre-corona, corona, and of their perceived future practices at post-corona period. It has been observed that a significant percentage (62.1%) of the respondents have received basic hygiene education at any level of their academic education. Nevertheless, their hygiene practices were very poor before the COVID-19 pandemic. The outbreak of the COVID-19 has reinforced their previous knowledge and greatly influenced their behavioural changes towards practicing hand hygiene as per World Health Organization guidelines for preventing the virus outbreak. The changes, however, have created increased water demand. The estimated water usage is found to be 2.68 times (9.15 L/c/d) and 2.52 times (8.59 L/c/d) higher in the corona and post-corona period respectively than that of the pre-corona situation (3.41 L/c/d). The principal component analysis (PCA) elucidated that an individual's practice of hand hygiene was associated with income, level of academic and hygiene education, and the COVID-19 outbreak itself. Moreover, the influence of hygiene education and COVID-19 outbreak affecting the duration of handwashing are found highly significant (p-value < 0.001) from the regression analysis. Raising awareness towards behavioural change of an individual about water usage, improvement of academic curriculum regarding hand hygiene and provision of water pricing are recommended to attain sustainable development goals of the country.

Unusual higher-order nonlinear optical properties in Au-coated triangular Ag-Au nanostructures.

Here, we report hitherto unobserved local field (LF)-assisted pump wavelength-dependent nonlinear optical (NLO) effects of three-photon (3PA)-induced four-photon absorption (4PA) at 532 nm and two-photon-induced 3PA at 730 nm in triangular-shaped core-shell Ag-Au nanoparticles (TrAg@Au) by femtosecond Z-scan. The shell thickness-dependent enhancement in the LF is observed by a COMSOL simulation. The intensity-dependent interplay between saturable and reverse-saturable absorptions along with switching of nonlinear (NL) phase is reported at 730 nm, showing the superiority of TrAg@Au in optical switching (OS). The optical limiting (OL) threshold (Fth) of 5.9(6.5)mJ/cm2 at 730 (532) nm boost their potential over benchmarked materials.

Plasmonic Sensing: Connecting the Dots.

Plasmonic sensitivity of noble metals has often been attributed to the morphology of the nanostructures and dielectric effects of both the materials and the surrounding medium. The measurable plasmonic shift with respect to the change in local dielectric as a function of analyte concentrations within nanoscale volume forms the basis of plasmonic sensing. However, the situation of the surrounding medium in the presence of multicomponent systems and, moreover, inhomogeneous adsorption around the anisotropic nanostructures become seemingly complicated as the precise description of several individual components becomes nearly impossible. Therefore, we have designed a retrospective formalism through a critical condensation of the electromagnetic scattering theories, macroscopic mixing rules, and micromechanics at the metal-analyte interface that can be adopted as generalized model irrespective of morphology of the nanostructures and the nature of analytes to account for the response of all the individual (microscopic) components to the observed (macroscopic) plasmonic sensing.

Manipulating the confinement of electromagnetic field in size-specific gold nanoparticles dimers and trimers.

The intriguing light-matter interactions can be governed by controlling the particle size and shape, electromagnetic interactions and dielectric properties and local environment of the metal nanostructures. Amongst the different approaches that have been engendered to manipulate light at the nanoscale, the self-assembly of metallic nanostructures with controllable interparticle distances and angular orientations, which strongly impact their optical attributes, is one of the viable avenues to exploit their utility in a diverse range of niche applications. The simplest geometrical architectures that enable such modulations are dimers with changeable interparticle distances and trimers with an additional degree of angular orientation to correlate the plasmonic observables with the observed spectral characteristics. Wet chemical approaches have been adopted in this study for the synthesis of size-selective gold nanoparticles, and appropriate organic linkers have judiciously been employed to induce plasmonic interactions amongst the gold nanoparticles in close proximity to each other. The combination of experimental observations and electromagnetic simulations adopted to probe the plasmonic interactions revealed that the electrodynamic coupling effect was very sensitive to particle size, interparticle distances and angular orientations in these simple nanoassemblies. The capability to precisely manipulate the electric field at the junctions between these plasmon-coupled nanoparticles could pave the way for the application of these nanoassemblies in surface-enhanced spectroscopies and sensing applications.

Interfacial assembly of ZnO quantum dots into giant supramolecular architectures.

Para-aminobenzoic acid (PABA) stabilised zinc oxide (ZnO) quantum dots (QDs) have been synthesised by refluxing zinc acetate dihydrate in methanol under alkaline condition and re-dispersed into water by centrifugation. Aqueous dispersion of PABA-stabilised ZnO QDs was taken with seven different organic solvents in test tubes and subjected to diazo reaction under specified conditions. It was seen that the quantum dots assembled into diverse superstructures depending on the nature of the immiscible solvent at the aqueous-organic interface. The assemblies so obtained have been characterised by energy dispersive X-ray (EDX) analysis, Fourier transform infrared (FTIR), fluorescence and Raman spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA), optical, fluorescence and scanning electron microscopic (SEM) images. It has been observed that the ensuing supramolecular assemblies exhibit significant electrical conductivity and photoluminescence properties.