Assessing the Potential Impact of the Declaration of Istanbul 2008 on Internet Reporting of Human Organ Transplantation-Related Crimes Using Interrupted Time Series Analysis and Meta-Analysis Approaches.

BACKGROUND: A severe shortage in donor organs is the major driver for organ transplantation-related crimes. The Declaration of Istanbul 2008 (DOI) was created to stop such crimes. We investigated the impact of DOI on Internet reporting of transplantation-related crimes. METHODS: We conducted Google Advanced Searches to collect data on "kidney trade," "kidney sale," "organ trafficking," and "transplant tourism" in 15 original participant and 10 nonparticipant countries, 6 years prior through 8 years after the promulgation of DOI. The data were normalized for population and transformed to a logarithmic scale. Interrupted time series analysis (ITSA) was applied to estimate the changes in slopes of the outcome variables before and after DOI, and then the overall intervention impact was calculated by meta-analysis. RESULTS: The combined results indicated that the overall impact of DOI on the reporting of "organ trafficking" and "transplant tourism" was statistically negative (reporting reduced significantly) as intended but on "kidney sale" and "kidney trade" was statistically positive (reporting increased significantly), and the increase was higher in the nonparticipant countries compared to the participant countries. The rate of reporting on "transplant tourism" declined in the participant countries more pronouncedly than in the nonparticipant countries. CONCLUSIONS: DOI has a positive impact on the reporting of "organ trafficking" and "transplant tourism" but not on the reporting of "kidney sale" and "kidney trade." The increased reporting of "kidney sale" and "kidney trade" can be indicative of an impact of DOI on public awareness and increased reporting of the residual transplantation-related crimes.

Integrated Extreme Real-Time PCR and High-Speed Melting Analysis in 52 to 87 Seconds.

BACKGROUND: Extreme PCR in <30 s and high-speed melting of PCR products in <5 s are recent advances in the turnaround time of DNA analysis. Previously, these steps had been performed on different specialized instruments. Integration of both extreme PCR and high-speed melting with real-time fluorescence monitoring for detection and genotyping is presented here. METHODS: A microfluidic platform was enhanced for speed using cycle times as fast as 1.05 s between 66.4 °C and 93.7 °C, with end point melting rates of 8 °C/s. Primer and polymerase concentrations were increased to allow short cycle times. Synthetic sequences were used to amplify fragments of hepatitis B virus (70 bp) and Clostridium difficile (83 bp) by real-time PCR and high-speed melting on the same instrument. A blinded genotyping study of 30 human genomic samples at F2 c.*97, F5 c.1601, MTHFR c.665, and MTHFR c.1286 was also performed. RESULTS: Standard rapid-cycle PCR chemistry did not produce any product when total cycling times were reduced to <1 min. However, efficient amplification was possible with increased primer (5 µmol/L) and polymerase (0.45 U/µL) concentrations. Infectious targets were amplified and identified in 52 to 71 s. Real-time PCR and genotyping of single-nucleotide variants from human DNA was achieved in 75 to 87 s and was 100% concordant to known genotypes. CONCLUSIONS: Extreme PCR with high-speed melting can be performed in about 1 min. The integration of extreme PCR and high-speed melting shows that future molecular assays at the point of care for identification, quantification, and variant typing are feasible.

Accurate diagnosis of spinal muscular atrophy and 22q11.2 deletion syndrome using limited deoxynucleotide triphosphates and high-resolution melting.

BACKGROUND: Copy number variation (CNV) has been implicated in the genetics of multiple human diseases. Spinal muscular atrophy (SMA) and 22q11.2 deletion syndrome (22q11.2DS) are two of the most common diseases which are caused by DNA copy number variations. Genetic diagnostics for these conditions would be enhanced by more accurate and efficient methods to detect the relevant CNVs. METHODS: Competitive PCR with limited deoxynucleotide triphosphates (dNTPs) and high-resolution melting (HRM) analysis was used to detect 22q11.2DS, SMA and SMA carrier status. For SMA, we focused on the copy number of SMN1 gene. For 22q11.2DS, we analyzed CNV for 3 genes (CLTCL1, KLHL22, and PI4KA) which are located between different region-specific low copy repeats. CFTR was used as internal reference gene for all targets. Short PCR products with separated Tms were designed by uMelt software. RESULTS: One hundred three clinical patient samples were pretested for possible SMN1 CNV, including carrier status, using multiplex ligation-dependent probe amplification (MLPA) commercial kit as gold standard. Ninety-nine samples consisting of 56 wild-type and 43 22q11.2DS samples were analyzed for CLTCL1, KLHL22, and PI4KA CNV also using MLPA. These samples were blinded and re-analyzed for the same CNVs using the limited dNTPs PCR with HRM analysis and the results were completely consistent with MLPA. CONCLUSIONS: Limited dNTPs PCR with HRM analysis is an accurate method for detecting SMN1 and 22q11.2 CNVs. This method can be used quickly, reliably, and economically in large population screening for these diseases.

High-Speed Melting Analysis: The Effect of Melting Rate on Small Amplicon Microfluidic Genotyping.

BACKGROUND: High-resolution DNA melting analysis of small amplicons is a simple and inexpensive technique for genotyping. Microfluidics allows precise and rapid control of temperature during melting. METHODS: Using a microfluidic platform for serial PCR and melting analysis, 4 targets containing single nucleotide variants were amplified and then melted at different rates over a 250-fold range from 0.13 to 32 °C/s. Genotypes (n = 1728) were determined manually by visual inspection after background removal, normalization, and conversion to negative derivative plots. Differences between genotypes were quantified by a genotype discrimination ratio on the basis of inter- and intragenotype differences using the absolute value of the maximum vertical difference between curves as a metric. RESULTS: Different homozygous curves were genotyped by melting temperature and heterozygous curves were identified by shape. Technical artifacts preventing analysis (0.3%), incorrect (0.06%), and indeterminate (0.4%) results were minimal, occurring mostly at slow melting rates (0.13-0.5 °C/s). Genotype discrimination was maximal at around 8 °C/s (2-8 °C/s for homozygotes and 8-16 °C/s for heterozygotes), and no genotyping errors were made at rates >0.5 °C/s. PCR was completed in 10-12.2 min, followed by melting curve acquisition in 4 min down to <1 s. CONCLUSIONS: Microfluidics enables genotyping by melting analysis at rates up to 32 °C/s, requiring <1 s to acquire an entire melting curve. High-speed melting reduces the time for melting analysis, decreases errors, and improves genotype discrimination of small amplicons. Combined with extreme PCR, high-speed melting promises nucleic acid amplification and genotyping in < 1 min.

Copy number assessment by competitive PCR with limiting deoxynucleotide triphosphates and high-resolution melting.

BACKGROUND: DNA copy number variation is associated with genetic disorders and cancer. Available methods to discern variation in copy number are typically costly, slow, require specialized equipment, and/or lack precision. METHODS: Multiplex PCR with different primer pairs and limiting deoxynucleotide triphosphates (dNTPs) (3-12 µmol/L) were used for relative quantification and copy number assessment. Small PCR products (50-121 bp) were designed with 1 melting domain, well-separated Tms, minimal internal sequence variation, and no common homologs. PCR products were displayed as melting curves on derivative plots and normalized to the reference peak. Different copy numbers of each target clustered together and were grouped by unbiased hierarchical clustering. RESULTS: Duplex PCR of a reference gene and a target gene was used to detect copy number variation in chromosomes X, Y, 13, 18, 21, epidermal growth factor receptor (EGFR), survival of motor neuron 1, telomeric (SMN1), and survival of motor neuron 2, centromeric (SMN2). Triplex PCR was used for X and Y and CFTR exons 2 and 3. Blinded studies of 50 potential trisomic samples (13, 18, 21, or normal) and 50 samples with potential sex chromosome abnormalities were concordant to karyotyping, except for 2 samples that were originally mosaics that displayed a single karyotype after growth. Large cystic fibrosis transmembrane conductance regulator (ATP-binding cassette sub-family C, member 7) (CFTR) deletions, EGFR amplifications, and SMN1 and SMN2 copy number assessments were also demonstrated. Under ideal conditions, copy number changes of 1.11-fold or lower could be discerned with CVs of about 1%. CONCLUSIONS: Relative quantification by restricting the dNTP concentration with melting curve display is a simple and precise way to assess targeted copy number variation.

Microfluidic genotyping by rapid serial PCR and high-speed melting analysis.

BACKGROUND: Clinical molecular testing typically batches samples to minimize costs or uses multiplex lab-on-a-chip disposables to analyze a few targets. In genetics, multiple variants need to be analyzed, and different work flows that rapidly analyze multiple loci in a few targets are attractive. METHODS: We used a microfluidic platform tailored to rapid serial PCR and high-speed melting (HSM) to genotype 4 single nucleotide variants. A contiguous stream of master mix with sample DNA was pulsed with each primer pair for serial PCR and melting. Two study sites each analyzed 100 samples for F2 (c.*97G>A), F5 (c.1601G>A), and MTHFR (c.665C>T and c.1286A>C) after blinding for genotype and genotype proportions. Internal temperature controls improved melting curve precision. The platform's liquid-handling system automated PCR and HSM. RESULTS: PCR and HSM were completed in a total of 12.5 min. Melting was performed at 0.5 °C/s. As expected, homozygous variants were separated by melting temperature, and heterozygotes were identified by curve shape. All samples were correctly genotyped by the instrument. Follow-up testing was required on 1.38% of the assays for a definitive genotype. CONCLUSIONS: We demonstrate genotyping accuracy on a novel microfluidic platform with rapid serial PCR and HSM. The platform targets short turnaround times for multiple genetic variants in up to 8 samples. It is also designed to allow automatic and immediate reflexive or repeat testing depending on results from the streaming DNA. Rapid serial PCR provides a flexible genetic work flow and is nicely matched to HSM analysis.

Quasi-digital PCR: Enrichment and quantification of rare DNA variants.

Rare variant enrichment and quantification was achieved by allele-specific, competitive blocker, digital PCR for aiming to provide a noninvasive method for detecting rare DNA variants from circulating cells. The allele-specific blocking chemistry improves sensitivity and lowers assay cost over previously described digital PCR methods while the instrumentation allowed for rapid thermal cycling for faster turnaround time. Because the digital counting of the amplified variants occurs in the presence of many wild-type templates in each well, the method is called "quasi-digital PCR". A spinning disk was used to separate samples into 1000 wells, followed by rapid-cycle, allele-specific amplification in the presence of a molecular beacon that serves as both a blocker and digital indicator. Monte Carlo simulations gave similar results to Poisson distribution statistics for mean number of template molecules and provided an upper and lower bound at a specified confidence level and accounted for input DNA concentration variation. A 111 bp genomic DNA fragment including the BRAF p.V600E mutation (c.T1799A) was amplified with quasi-digital PCR using cycle times of 23 s. Dilution series confirmed that wild-type amplification was suppressed and that the sensitivity for the mutant allele was <0.01 % (43 mutant alleles amongst 500,000 wild-type alleles). The Monte Carlo method presented here is publically available on the internet and can calculate target concentration given digital data or predict digital data given target concentration.

Genotyping accuracy of high-resolution DNA melting instruments.

BACKGROUND: High-resolution DNA melting is a closed-tube method for genotyping and variant scanning that depends on the thermal stability of PCR-generated products. Instruments vary in thermal precision, sample format, melting rates, acquisition, and software. Instrument genotyping accuracy has not been assessed. METHODS: Each genotype of the single nucleotide variant (SNV) (c.3405-29A>T) of CPS1 (carbamoyl-phosphate synthase 1, mitochondrial) was amplified by PCR in the presence of LCGreen Plus with 4 PCR product lengths. After blinding and genotype randomization, samples were melted in 10 instrument configurations under conditions recommended by the manufacturer. For each configuration and PCR product length, we analyzed 32-96 samples (depending on batch size) with both commercial and custom software. We assessed the accuracy of heterozygote detection and homozygote differentiation of a difficult, nearest-neighbor symmetric, class 4 variant with predicted ΔT(m) of 0.00 °C. RESULTS: Overall, the heterozygote accuracy was 99.7% (n = 2141), whereas homozygote accuracy was 70.3% (n = 4441). Instruments with single sample detection as opposed to full-plate imaging better distinguished homozygotes (78.1% and 61.8%, respectively, χ(2) P < 0.0005). Custom software improved accuracy over commercial software (P < 0.002), although melting protocols recommended by manufacturers were better than a constant ramp rate of 0.1 °C with an oil overlay. PCR products of 51, 100, 272, and 547 bp had accuracies of 72.3%, 83.1%, 59.8%, and 65.9%, respectively (P < 0.0005). CONCLUSIONS: High-resolution melting detects heterozygotes with excellent accuracy, but homozygote accuracy is dependent on detection mode, analysis software, and PCR product size, as well as melting temperature differences between, and variation within, homozygotes.

Heterozygote PCR product melting curve prediction.

Melting curve prediction of PCR products is limited to perfectly complementary strands. Multiple domains are calculated by recursive nearest neighbor thermodynamics. However, the melting curve of an amplicon containing a heterozygous single-nucleotide variant (SNV) after PCR is the composite of four duplexes: two matched homoduplexes and two mismatched heteroduplexes. To better predict the shape of composite heterozygote melting curves, 52 experimental curves were compared with brute force in silico predictions varying two parameters simultaneously: the relative contribution of heteroduplex products and an ionic scaling factor for mismatched tetrads. Heteroduplex products contributed 25.7 ± 6.7% to the composite melting curve, varying from 23%-28% for different SNV classes. The effect of ions on mismatch tetrads scaled to 76%-96% of normal (depending on SNV class) and averaged 88 ± 16.4%. Based on uMelt (www.dna.utah.edu/umelt/umelt.html) with an expanded nearest neighbor thermodynamic set that includes mismatched base pairs, uMelt HETS calculates helicity as a function of temperature for homoduplex and heteroduplex products, as well as the composite curve expected from heterozygotes. It is an interactive Web tool for efficient genotyping design, heterozygote melting curve prediction, and quality control of melting curve experiments. The application was developed in Actionscript and can be found online at http://www.dna.utah.edu/hets/.

Symmetric snapback primers for scanning and genotyping of the cystic fibrosis transmembrane conductance regulator gene.

BACKGROUND: High-resolution melting of PCR products is an efficient and analytically sensitive method to scan for sequence variation, but detected variants must still be identified. Snapback primer genotyping uses a 5' primer tail complementary to its own extension product to genotype the resulting hairpin via melting. If the 2 methods were combined to analyze the same PCR product, the residual sequencing burden could be reduced or even eliminated. METHODS: The 27 exons and neighboring splice sites of the CFTR [cystic fibrosis transmembrane conductance regulator (ATP-binding cassette sub-family C, member 7)] gene were amplified by the PCR in 39 fragments. Primers included snapback tails for genotyping 7 common variants and the 23 CFTR mutations recommended for screening by the American College of Medical Genetics. After symmetric PCR, the amplicons were analyzed by high-resolution melting to scan for variants. Then, a 5-fold excess of H2O was added to each reaction to produce intramolecular hairpins for snapback genotyping by melting. Each melting step required <10 min. Of the 133 DNA samples analyzed, 51 were from CFTR patient samples or cell lines. RESULTS: As expected, the analytical sensitivity of heterozygote detection in blinded studies was 100%. Snapback genotyping reduced the need for sequencing from 7.9% to 0.5% of PCR products; only 1 amplicon every 5 patients required sequencing to identify nonanticipated rare variants. We identified 2 previously unreported variants: c.3945A>G and c.4243-5C>T. CONCLUSIONS: CFTR analysis by sequential scanning and genotyping with snapback primers is a good match for targeted clinical genetics, for which high analytical accuracy and rapid turnaround times are important.

uAnalyze: web-based high-resolution DNA melting analysis with comparison to thermodynamic predictions.

uAnalyze(SM) is a web-based tool for analyzing high-resolution melting data of PCR products. PCR product sequence is input by the user and recursive nearest neighbor thermodynamic calculations used to predict a melting curve similar to uMELT(http://www.dna.utah.edu/umelt/umelt.html). Unprocessed melting data are input directly from LightScanner-96, LS32, or HR-1 data files or via a generic format for other instruments. A fluorescence discriminator identifies low intensity samples to prevent analysis of data that cannot be adequately normalized. Temperature regions that define fluorescence background are initialized by prediction and optionally adjusted by the user. Background is removed either as an exponential or by linear baseline extrapolation. The precision or, "curve spread," of experimental melting curves is quantified as the average of the maximum helicity difference of all curve pairs. Melting curve accuracy is quantified as the area or "2D offset" between the average experimental and predicted melting curves. Optional temperature overlay (temperature shifting) is provided to focus on curve shape. Using 14 amplicons of CYBB, the mean + / - standard deviation of the difference between experimental and predicted fluorescence at 50 percent helicity was 0:04 + / - 0:48°C. uAnalyze requires Flash, is not browser specific and can be accessed at http://www.dna.utah.edu/uv/uanalyze.html.

Snapback primer genotyping of the Gilbert syndrome UGT1A1 (TA)(n) promoter polymorphism by high-resolution melting.

BACKGROUND: Gilbert syndrome, a chronic nonhemolytic unconjugated hyperbilirubinemia, is associated with thymine-adenine (TA) insertions in the UGT1A1 (UDP glucuronosyltransferase 1 family, polypeptide A1) promoter. The UGT1A1 promoter genotype also correlates with toxicity induced by the chemotherapeutic drug irinotecan. Current closed-tube assays for genotyping the UGT1A1 (TA)(n) promoter polymorphism require multiple labeled probes and/or have difficulty classifying the (TA)(5) and (TA)(8) alleles. METHODS: An unlabeled 5' extension on one primer that creates a hairpin after asymmetric PCR was used to develop a snapback primer high-resolution melting assay for the (TA)(n) polymorphism. A new method that plots the local deviation from exponential decay to improve genotype clustering was used to remove background fluorescence and to analyze the data. The snapback assay was compared with small-amplicon melting and fragment length analyses in a blinded study of DNA samples from 100 African Americans. RESULTS: Genotyping results obtained by small-amplicon melting and snapback primer melting were 83% and 99% concordant, respectively, with results obtained by fragment analysis. Reanalysis of the single discordant sample in the results of the snapback genotyping assay and the fragment analysis revealed an error in the fragment analysis. High-resolution melting was required for accurate snapback genotyping of the UGT1A1 (TA)(n) polymorphism. The 100% accuracy obtained with a capillary-based instrument fell to ≤81% with plate-based instruments. CONCLUSIONS: In contrast to small-amplicon genotyping, snapback primer genotyping can distinguish all UGT1A1 promoter genotypes. Rapid-cycle PCR combined with snapback primer analysis with only 2 unlabeled PCR primers (one with a 5' extension) and a saturating DNA dye can genotype loci with several alleles in <30 min.

uMELT: prediction of high-resolution melting curves and dynamic melting profiles of PCR products in a rich web application.

UNLABELLED: uMelt(SM) is a flexible web-based tool for predicting DNA melting curves and denaturation profiles of PCR products. The user defines an amplicon sequence and chooses a set of thermodynamic and experimental parameters that include nearest neighbor stacking energies, loop entropy effects, cation (monovalent and Mg(++)) concentrations and a temperature range. Using an accelerated partition function algorithm along with chosen parameter values, uMelt interactively calculates and visualizes the mean helicity and the dissociation probability at each sequence position at temperatures within the temperature range. Predicted curves display the mean helicity as a function of temperature or as derivative plots. Predicted profiles display stability as a function of sequence position either as 50% helicity temperatures or as the helicity probability at specific temperatures. The loss of helicity associated with increasing temperature may be viewed dynamically to visualize domain formation within the molecule. Results from fluorescent high-resolution melting experiments match the number of predicted melting domains and their relative temperatures. However, the absolute melting temperatures vary with the selected thermodynamic parameters and current libraries do not account for the rapid melting rates and helix stabilizing dyes used in fluorescent melting experiments. uMelt provides a convenient platform for simulation and design of high-resolution melting assays. AVAILABILITY AND IMPLEMENTATION: The application was developed in Actionscript and can be found online at http://www.dna.utah.edu/umelt/umelt.html. Adobe Flash is required to run in all browsers.

Implementation of a cost-effective unlabeled probe high-resolution melt assay for genotyping of Factor V Leiden.

The Factor V Leiden mutation (FVL; c.1601G>A, p.Arg534Gln), the most common aberration underlying activated Protein C resistance, results in disruption of a major anticoagulation pathway and is a leading cause of inherited thrombophilia. A high-throughput assay for FVL mutation detection was developed using a single unlabeled probe on a high-resolution platform, the 96-well Roche 480 LightCycler (LC480) instrument. This method replaced the U.S. Food and Drug Administration-approved Roche Factor V Leiden kit assay on the LightCycler PCR instrument, decreasing total cost by 48%. The analytical sensitivity and specificity of the LC480 high-resolution assay approached 100% for the FVL mutation. Factor V mutations in proximity to the FVL locus may influence probe binding efficiency and melt characteristics. One out of three very rare variants tested in a separate study, 1600delC, was not distinguishable from FVL using the described high-resolution assay. However, a c.1598G>A variant, which changes the amino acid sequence from arginine to lysine at position 533, was detected by this high-resolution assay and confirmed by bidirectional sequencing. In the labeled probe LightCycler assay, the c.1598G>A variant was indistinguishable from the heterozygous FVL control. The c.1598G>A variant has not been described previously and its clinical significance is uncertain. In conclusion, the LC480 FVL assay is cost effective in a high-throughput setting, with capability to detect both previously described and novel FV variants.

Enrichment and detection of rare alleles by means of snapback primers and rapid-cycle PCR.

BACKGROUND: Selective amplification of minority alleles is often necessary to detect cancer mutations in clinical samples. METHODS: Minor-allele enrichment and detection were performed with snapback primers in the presence of a saturating DNA dye within a closed tube. A 5' tail of nucleotides on 1 PCR primer hybridizes to the variable locus of its extension product to produce a hairpin that selectively enriches mismatched alleles. Genotyping performed after rapid-cycle PCR by melting of the secondary structure identifies different variants by the hairpin melting temperature (T(m)). Needle aspirates of thyroid tissue (n = 47) and paraffin-embedded biopsy samples (n = 44) were analyzed for BRAF (v-raf murine sarcoma viral oncogene homolog B1) variant p.V600E, and the results were compared with those for dual hybridization probe analysis. Needle aspirates of lung tumors (n = 8) were analyzed for EGFR [epidermal growth factor receptor (erythroblastic leukemia viral (v-erb-b) oncogene homolog, avian)] exon 19 in-frame deletions. RESULTS: Use of 18-s cycles and momentary extension times of "0 s" with rapid-cycle PCR increased the selective amplification of mismatched alleles. A low Mg(2+) concentration and a higher hairpin T(m) relative to the extension temperature also improved the detection limit of mismatched alleles. The detection limit was 0.1% for BRAF p.V600E and 0.02% for EGFR exon 19 in-frame deletions. Snapback and dual hybridization probe methods for allele quantification of the thyroid samples correlated well (R(2) = 0.93) with 2 more BRAF mutations (45 and 43, respectively, of 91 samples) detected after snapback enrichment. Different EGFR in-frame deletions in the lung samples produced different hairpin T(m)s. CONCLUSIONS: Use of snapback primers for enrichment and detection of minority alleles is simple, is inexpensive to perform, and can be completed in a closed tube in <25 min.

Mathematical algorithms for high-resolution DNA melting analysis.

This chapter discusses mathematical and computational methods that enhance the modeling, optimization, and analysis of high-resolution DNA melting assays. In conjunction with recent improvements in reagents and hardware, these algorithms have enabled new closed-tube techniques for genotyping, mutation scanning, confirming or ruling out genotypic identity among living related organ donors, and quantifying constituents in samples containing different DNA sequences. These methods are rapid, involving only 1 to 10 min of automatic fluorescence acquisition after a polymerase chain reaction. They are economical because inexpensive fluorescent dyes are used rather than fluorescently labeled probes. They are contamination-free and nondestructive. Specific topics include methods for extracting accurate melting curve information from raw signal, for clustering and classifying the results, for predicting complete melting curves and not just melting temperatures, and for modeling and analyzing the behavior of mixtures of multiple duplexes.

SNP genotyping by unlabeled probe melting analysis.

Fluorescent nucleic acid detection in polymerase chain reaction (PCR) generally uses oligonucleotide probes labeled with covalently attached dyes. However, unlabeled oligonucleotides in the presence of saturating DNA dyes can also serve as hybridization probes. The DNA dye, LCGreen Plus, and a 3'-blocked unlabeled probe are added before amplification, and asymmetric PCR is performed at a 1:5 to 1:10 primer ratio. After PCR is complete, fluorescent melting curves reveal both probe melting at low temperature and amplicon melting at high temperature. After background removal, the melting temperature(s) of the probe/target duplex specific to the allele(s) amplified are revealed. Probes between 20 and 40 bp with T(m)s between 50 and 85 degrees C are effective. The method requires only three standard oligonucleotides and endpoint fluorescence melting. No real-time PCR or allele-specific amplification is needed. Unlabeled probes are inexpensive, provide the sequence specificity of probes, and allow simultaneous identification of multiple alleles by melting analysis.

Product differentiation during continuous-flow thermal gradient PCR.

A continuous-flow PCR microfluidic device was developed in which the target DNA product can be detected and identified during its amplification. This in situ characterization potentially eliminates the requirement for further post-PCR analysis. Multiple small targets have been amplified from human genomic DNA, having sizes of 108, 122, and 134 bp. With a DNA dye in the PCR mixture, the amplification and unique melting behavior of each sample is observed from a single fluorescent image. The melting behavior of the amplifying DNA, which depends on its molecular composition, occurs spatially in the thermal gradient PCR device, and can be observed with an optical resolution of 0.1 degrees C pixel(-1). Since many PCR cycles are within the field of view of the CCD camera, melting analysis can be performed at any cycle that contains a significant quantity of amplicon, thereby eliminating the cycle-selection challenges typically associated with continuous-flow PCR microfluidics.

Identifying common genetic variants by high-resolution melting.

BACKGROUND: Heteroduplex scanning techniques usually detect all heterozygotes, including common variants not of clinical interest. METHODS: We conducted high-resolution melting analysis on the 24 exons of the ACVRL1 and ENG genes implicated in hereditary hemorrhagic telangiectasia (HHT). DNA in samples from 13 controls and 19 patients was PCR amplified in the presence of LCGreen I, and all 768 exons melted in an HR-1 instrument. We used 10 wild-type controls to identify common variants, and the remaining samples were blinded, amplified, and analyzed by melting curve normalization and overlay. Unlabeled probes characterized the sequence of common variants. RESULTS: Eleven common variants were associated with 8 of the 24 HHT exons, and 96% of normal samples contained at least 1 variant. As a result, the positive predictive value (PPV) of a heterozygous exon was low (31%), even in a population of predominantly HHT patients. However, all common variants produced unique amplicon melting curves that, when considered and eliminated, resulted in a PPV of 100%. In our blinded study, 3 of 19 heterozygous disease-causing variants were missed; however, 2 were clerical errors, and the remaining false negative would have been identified by difference analysis. CONCLUSIONS: High-resolution melting analysis is a highly accurate heteroduplex scanning technique. With many exons, however, use of single-sample instruments may lead to clerical errors, and routine use of difference analysis is recommended. Common variants can be identified by their melting curve profiles and genotyped with unlabeled probes, greatly reducing the false-positive results common with scanning techniques.

Simultaneous mutation scanning and genotyping by high-resolution DNA melting analysis.

This protocol permits the simultaneous mutation scanning and genotyping of PCR products by high-resolution DNA melting analysis. This is achieved using asymmetric PCR performed in the presence of a saturating fluorescent DNA dye and unlabeled oligonucleotide probes. Fluorescent melting curves of both PCR amplicons and amplicon-probe duplexes are analyzed. The shape of the PCR amplicon melting transition reveals the presence of heterozygotes, whereas specific genotyping is enabled by melting of the unlabeled probe-amplicon duplex. Unbiased hierarchal clustering of melting transitions automatically groups different sequence variants; this allows common variants to be easily recognized and genotyped. This technique may be used in both laboratory research and clinical settings to study single-nucleotide polymorphisms and small insertions and deletions, and to diagnose associated genetic disorders. High-resolution melting analysis accomplishes simultaneous gene scanning and mutation genotyping in a fraction of the time required when using traditional methods, while maintaining a closed-tube environment. The PCR requires <30 min (capillaries) or 1.5 h (96- or 384-well plates) and melting acquisition takes 1-2 min per capillary or 5 min per plate.