Extremely Slow Thermally-Induced Spin Crossover in the Two-Dimensional Network [Fe(bbtr)3 ](BF4 )2.

Cooling [Fe(bbtr)3 ](BF4 )2 (bbtr=1,4-di(1,2,3-triazol-1-yl)butane) triggers very slow spin crossover below 80 K (T1/2 ↓ =76 K). The spin crossover (SCO) is accompanied by a hysteresis loop (T1/2 ↑ =89 K). In contrast to isostructural perchlorate analogue [Fe(bbtr)3 ](ClO4 )2 in which spin crossover during cooling is preceded by phase transition at TPT =126 K in tetrafluoroborate phase transition does not occur to the beginning of spin crossover (80 K). Studies of mixed crystals [Fe(bbtr)3 ](BF4 )2(1-x) (ClO4 )2x (0.5≤x≤0.9) showed that a phase transition precedes spin crossover, however, for x≅0.46 intersection of T1/2 (x) and TPT (x) dependencies takes place. The application of pressure of 1 GPa shifts the spin crossover in [Fe(bbtr)3 ](BF4 )2 to a temperature above 270 K. High-pressure studies of neat tetrafluoroborate and perchlorate, as well as mixed crystals [Fe(bbtr)3 ](BF4 )2(1-x) (ClO4 )2x (0.1≤x≤0.9), revealed that at 295 K P1/2 value changes linearly with x indicating similar mechanism of spin crossover under elevated pressure in all systems under investigation. Variable pressure single crystal X-ray diffraction studies confirmed that in contrast to thermally induced spin crossover undergoing differently in tetrafluoroborate and perchlorate an application of high pressure removes this differentiation leading to a similar mechanism depending at first on start spin crossover and then P-3→P-1 phase transition occurs. In this report we have shown that 2D coordination polymer [Fe(bbtr)3 ](BF4 )2 (bbtr=1,4-di(1,2,3-triazol-1-yl)butane) treated to date as spin crossover silent shows thermally induced spin crossover phenomenon. Spin crossover in tetrafluoroborate is extremely slow. Determination of the spin crossover curve required carrying measurement in the settle mode-cooling from 85 to 70 K took about 600 h (average velocity of change of temperature ca. 0.0004 K/min).

Mechanochemical Studies on Coupling of Hydrazines and Hydrazine Amides with Phenolic and Furanyl Aldehydes-Hydrazones with Antileishmanial and Antibacterial Activities.

Hydrazone compounds represent an important area of research that includes, among others, synthetic approaches and biological studies. A series of 17 hydrazones have been synthesized by mechanochemical means. The fragments chosen were phenolic and furanyl aldehydes coupled with 12 heterocyclic hydrazines or hydrazinamides. All compounds can be obtained quantitatively when operating on a planetary ball mill and a maximum reaction time of 180 min (6 cycles of 30 min each). Complete spectroscopic analyses of hydrazones revealed eight compounds (3-5, 8-11, 16) present in one geometric form, six compounds (1, 2, 13-15) present in two isomeric forms, and three compounds (6, 7, 12) where one rotation is restricted giving rise to two different forms. The single crystal X-ray structure of one of the hydrazones bearing the isoniazid fragment (8) indicates a crystal lattice consisting of two symmetry-independent molecules with different geometries. All compounds obtained were tested for anti-infectious and antibacterial activities. Four compounds (1, 3, 5 and 8) showed good activity against Mycobacterium tuberculosis, and one (7) was very potent against Staphylococcus aureus. Most interesting, this series of compounds displayed very promising antileishmanial activity. Among all, compound 9 exhibited an IC50 value of 0.3 µM on the Leishmania donovani intramacrophage amastigote in vitro model and a good selectivity index, better than miltefosine, making it worth evaluating in vivo.

Preparation of Confined One-Dimensional Boron Nitride Chains in the 1-D Pores of Siliceous Zeolites under High-Pressure, High-Temperature Conditions.

Low-dimensional boron nitride (BN) chains were prepared in the one-dimensional pores of the siliceous zeolites theta-one (TON) and Mobil-twelve (MTW) by the infiltration, followed by the dehydrocoupling and pyrolysis of ammonia borane under high-pressure, high-temperature conditions. High-pressure X-ray diffraction in a diamond anvil cell and in a large-volume device was used to follow in situ these different steps in order to determine the optimal conditions for this process. Based on these results, millimeter-sized samples of BN/TON and BN/MTW were synthesized. Characteristic B-N stretching vibrations of low-dimensional BN were observed by infrared and Raman spectroscopies. The crystal structures were determined using a combination of X-ray diffraction and density functional theory with one and two one-dimensional zig-zag (BN)x chains per pore in BN/TON and BN/MTW, respectively. These 1-D BN chains potentially have interesting photoluminescence properties in the far ultraviolet region of the electromagnetic spectrum.

Pressure Tuning of Coupled Structural and Spin State Transitions in the Molecular Complex [Fe(H2B(pz)2)2(phen)].

The large volume change, which accompanies the molecular spin crossover (SCO) phenomenon in some transition metal complexes, prompts frequently the coupling of the SCO with other instabilities. Understanding the driving mechanism(s) of such coupled phase transitions is not only important for fundamental reasons but also provides scope for the development of multifunctional materials. The general theoretical expectation is that the coupling has elastic origin, and the sequence of transitions can be tuned by an externally applied pressure, but dedicated experiments remain scarce. Here, we used high-pressure and low-temperature single-crystal X-ray diffraction to investigate the high-spin (HS) to low-spin (LS) transitions in the molecular complexes [FeII(H2B(pz)2)2(bipy)] and [FeII(H2B(pz)2)2(phen)]. In the bipyridine complex, the SCO is continuous and isostructural over the whole T, P-range (100-300 K, 0-2 GPa). In the phenanthroline derivative, however, the SCO is concomitant with a symmetry-breaking transition (C2/c to P1̅). Structural analysis reveals that the coupling between the two phenomena can be tuned by external pressure from a virtually simultaneous HSC2/c-LSP1̅ transition to the sequence of HSC2/c-LSC2/c-LSP1̅ transitions. The correlation of spontaneous strain and order parameter behaviors highlights that the "separated" transitions remain still connected via strain coupling, whereas the "simultaneous" transitions are partially split.

Structural reasons for the formation of multicomponent products and the influence of high pressure.

(S)-(-)-1-Phenylethanaminium 4-(2,4,6-triisopropylbenzoyl)benzoate (S-PEATPBB) undergoes a photochemical reaction in its crystalline form upon UV irradiation and forms three different products: the first product is the result of a Yang cyclization with the participation of the δ-H atom of o-isopropyl (product D) and the second and third products are obtained via a Norrish-Yang reaction with the involvement of the γ-H atom of 2-isopropyl (product P) and 6-isopropyl (product Z). These products are formed in different proportions (D > P >> Z). The path and kinetics of the reaction were monitored step-by-step using crystallographic methods, both under ambient and high-pressure conditions. The reactivity of S-PEATPBB depends strongly on the geometry of the reaction centre and the volume of the reaction cavity. Due to the geometrical preferences making the cyclization reaction easier to proceed, product D dominates over the other products, while the formation of product Z becomes difficult or almost impossible at high pressure. The reaction proceeds with an increase of the unit-cell volume, which, suppressed by high pressure, results in a significant decrease of the reaction rate. The crystal lattice of S-PEATPBB shows high elasticity. The quality of the partially reacted crystal remains the same after decompression from 0.75 GPa to 0.1 MPa.

Anomalous Volume Changes in the Siliceous Zeolite Theta-1 TON due to Hydrogen Insertion under High-Pressure, High-Temperature Conditions.

High-pressure X-ray diffraction and Raman spectroscopy in a diamond anvil cell were used to study the insertion of the chemical hydrogen storage material, ammonia borane, in the one-dimensional pores of the zeolite theta-1 TON. Heating of this material up to 300 °C under pressures up to 5 GPa resulted in the release of a significant amount of hydrogen due to the conversion of ammonia borane confined in the channels of TON and outside the zeolite to polyaminoborane and then polyiminoborane chains. The filling of TON with hydrogen resulted in a much greater increase in unit cell volume than that corresponding to thermal expansion of normal compact inorganic solids. This process at high temperature is accompanied by a phase transition from the collapsed high-pressure Pbn21 form to the more symmetric Cmc21 phase with expanded pores. This material has a high capacity for hydrogen adsorption under high-temperature, high-pressure conditions.

Impact of High Pressure on Metallophilic Interactions and Its Consequences for Spectroscopic Properties of a Model Tetranuclear Silver(I)-Copper(I) Complex in the Solid State.

Structure-property relationships were investigated via combined high-pressure spectroscopic and X-ray diffraction techniques for a model luminescent Ag2Cu2L4 (L = 2-diphenylphosphino-3-methylindole) complex in the crystalline state. The experimental results were contributed by theoretical calculations, compared with the previously evaluated light-induced geometrical changes, and discussed in the context of available literature to date. To the best of our knowledge, this is the first study of this kind devoted to a coinage-metal complex for which the argentophilic interactions are crucial. High-pressure X-ray diffraction and optical spectroscopy experiments showed close correspondence between structural changes and optical properties. The unit-cell angles, absorption edges, emission maxima, decay lifetimes and silver-copper bond trends, all change around 2-3 GPa. A blue-shift to red-shift switch when increasing the pressure was observed for both absorption and emission spectra. This is unique behavior when compared to the literature-reported coinage metal systems. It also occurred that the pressure-induced structural changes differ notably from the geometrical distortions observed for the excited state. Interestingly, shortening of the Ag-Ag bond itself does not ensure the red shift of the absorption and emission spectra. All the optical spectroscopy data are suggestive of an important role of defects, likely related to the lack of a hydrostatic pressure transmitting medium, for pressures higher than 3 GPa.

Neon-Bearing Ammonium Metal Formates: Formation and Behaviour under Pressure.

The incorporation of noble gas atoms, in particular neon, into the pores of network structures is very challenging due to the weak interactions they experience with the network solid. Using high-pressure single-crystal X-ray diffraction, we demonstrate that neon atoms enter into the extended network of ammonium metal formates, thus forming compounds Nex [NH4 ][M(HCOO)3 ]. This phenomenon modifies the compressional and structural behaviours of the ammonium metal formates under pressure. The neon atoms can be clearly localised within the centre of [M(HCOO)3 ]5 cages and the total saturation of this site is achieved after ∼1.5 GPa. We find that by using argon as the pressure-transmitting medium, the inclusion inside [NH4 ][M(HCOO)3 ] is inhibited due to the larger size of the argon. This study illustrates the size selectivity of [NH4 ][M(HCOO)3 ] compounds between neon and argon insertion under pressure, and the effect of inclusion on the high-pressure behaviour of neon-bearing ammonium metal formates.

Unwinding Au(+)···Au(+) Bonded Filaments in Ligand-Supported Gold(I) Polymer under Pressure.

The ultimately thin single-strand gold filaments, of Au(+)···Au(+) bonded gold(I) diethyldithiocarbamate polymer, AuEt2DTC, can be transformed depending on pressure and solvate contents. When synthesized in the presence of CH2Cl2, it crystallizes into a tetragonal AuEt2DTC·xCH2Cl2 phase α with ligand-supported and unsupported Au(+)···Au(+) bonded filaments modulated into molecular Au8-pitch helices. Low contents of CH2Cl2 favors the ß phase of significantly reduced volume and orthorhombic space group Fddd. The α-AuEt2DTC·xCH2Cl2 crystal exhibits a highly unusual negative-area compressibility, due to the spring-like compression of helices. Above 0.05 GPa, the crystal transforms to phase ß, where the Au16-pitch helices partly unwind their turns, which relaxes the tension generated by external pressure between neighboring helices of the opposite handedness. This is a unique observation of atomic-scale helical filaments transformation, which otherwise is a universal process analogous to the helix reversal between DNA forms B and Z, and in macroscopic world it is similar to nonperiodic unwind kinks in grapevine tendrils and telephone cords. Pressure also reduces the differences between the ligand-supported and unsupported Au(+)···Au(+) bonds.

Redetermination of bis-(O,O'-diethyl dithio-phosphato-κS,S')nickel(II).

The centrosymmetric title complex, [Ni{S(2)P(OC(2)H(5))(2)}(2)], has been redetermined using area-detector data. The central Ni(S(2)P)(2) core is essentially planar and confirms the early results of McConnell & Kastalsky [Acta Cryst. (1967), 22, 853-859] based on multiple film technique data. In the title structure, the standard uncertainty values are approximately seven times lower and all H-atom positions are calculated. A pair of short symmetry-related H⋯H contacts with distances of 2.33 Šis observed in the crystal structure.