Transparent ultrahigh-molecular-weight polyethylene/MXene films with efficient UV-absorption for thermal management.

The rational use and conversion of energy are the primary means for achieving the goal of carbon neutrality. MXenes can be used for photothermal conversion, but their opaque appearance limits wider applications. Herein, we successfully develop visible-light transparent and UV-absorbing polymer composite film by solution blending the MXene with polyethylene and then vacuum pressing. The resulting film could be quickly heated to 65 °C under 400 mW cm-2 light irradiation and maintained over 85% visible-light transmittance as well as low haze (<12%). The findings of the indoor heat insulation test demonstrate that the temperature of the glass house model covered by this film was 6-7 °C lower than that of the uncovered model, revealing the potential of transparent film in energy-saving applications. In order to mimic the energy-saving condition of the building in various climates, a typical building model with this film as the outer layer of the window was created using the EnergyPlus building energy consumption software. According to predictions, they could reduce yearly refrigeration energy used by 31-61 MJ m-2, and 3%-12% of the total energy used for refrigeration in such structures. This work imply that the film has wide potential for use as transparent devices in energy-related applications.

Ag Nanoparticles-Coated Shish-Kebab Superstructure Film for Wearable Heater.

Passive and active wearable heaters have received widespread attention due to their efficient utilization of solar energy and all-weather heating capabilities, but the current challenges are their preparation processes being time-consuming and equipment expensive. Herein, a simple and facilitated preparation method for the multifunctional wearable heater was developed, which springs Ag nanoparticles on the shish-kebab superstructure film via deposited melanin-like polydopamine as the adhesive. The light absorption ability of the resultant wearable heater in the visible region can be significantly enhanced by the addition of polydopamine, realizing a highly efficient photothermal conversion ability. Accordingly, it can achieve rapid warming ability whether passive heating (up to 45 °C about 60 s at 100 mW/cm2) or active heating (up to 72 °C about 40 s at 0.6 V), compared to ordinary cotton fabric. In addition, it can realize a 6.3 °C temperature difference with Cotton, showing excellent heat preservation ability. This study demonstrates a simple and low-cost approach for the prepared shish-kebab superstructure-based wearable heaters.

Controllable-morphology polymer blend photonic metafoam for radiative cooling.

Incorporating radiative cooling photonic structures into the cooling systems of buildings presents a novel strategy to mitigate global warming and boost global carbon neutrality. Photonic structures with excellent solar reflection and thermal emission can be obtained by a rational combination of different materials. The current preparation strategies of radiative cooling materials are dominated by doping inorganic micro-nano particles into polymers, which usually possess insufficient solar reflectance. Here, a porous polymer metafoam was prepared with polycarbonate (PC) and polydimethylsiloxane (PDMS) using a simple thermally induced phase separation method. The metafoam exhibits strong solar reflectivity (97%), superior thermal emissivity (91%), and low thermal conductivity (46 mW m-1 K-1) due to the controllable morphology of the randomly dispersed light-scattering air voids. Cooling tests demonstrate that the metafoam could reduce the average temperature by 5.2 °C and 10.2 °C during the daytime and nighttime, respectively. In addition, the simulation of a cooling energy system of buildings indicates that the metafoam can save 3.2-26.7 MJ m-2 per year in different cities, which is an energy-saving percentage of 14.7-41%. The excellent comprehensive performances, including the passive cooling property, thermal insulation and self-cleaning of the metafoam makes it appropriate for practical outdoor applications, exhibiting its great potential as an energy-saving building cooling material.

Superhydrophobic Thermoplastic Polyurethane Foam Fabricated by Phase Separation and Silica Coating for Oil-Water Separation.

Oil spills and the presence of oily wastewater have resulted in substantial ecological damage. Superhydrophobic polymer foam with selectivity and adsorption capacity is a promising candidate for efficient oil-water separation. In this study, a method that combines phase separation and silica coating to produce superhydrophobic thermoplastic polyurethane (TPU) foam is proposed. The TPU foam demonstrates superhydrophobicity with a water contact angle of 155.62°, and exhibits a maximum saturated adsorption capacity of 54.11 g g-1 . Furthermore, the foam can be utilized as a filter for oil-water separation, maintaining its filtration efficiency (41.2 m3  m2  h-1 ) even after ten filtration cycles.

A Shish-Kebab Superstructure Film for Personal Radiative Cooling.

Due to global warming and the energy crisis, incorporating passive radiative cooling into personal thermal management has attracted extensive attention. However, developing a wearable textile that reflects incoming sunlight and allows mid-infrared radiation transmission is still a tough challenge. Herein, a shish-kebab superstructure film was produced via a flow-induced crystallization strategy for personal radiative cooling. The resulting film endowed a high infrared transmittance (87%) and improved sunlight reflectivity (83%). A device was developed to simulate the human body skin, and the temperatures of the shish-kebab film were 2.5 and 2.6 °C lower than that of traditional textile in outdoor and indoor tests, respectively. In order to make the shish-kebab film more wearable, a series of modifications were then carried out. This study demonstrates the substantial potential to personal thermal management textiles.

Review on Cell Structure Regulation and Performances Improvement of Porous Poly(Lactic Acid).

Recent advances in the cell structure regulation and performances improvement of porous poly(lactic acid) materials (PPMs) are systematically reviewed in this feature article. First, the typical processing methods, including template method, non-solvent induced phase separation, freeze-drying, and supercritical CO2  foaming, of PPMs are introduced emphatically. Their various cell morphologies by different processing methods are summarized: finger-like, honeycomb-like, fiber-like, through cell, open cell, closed cell, ball-like, and flower-like. Meanwhile, the transformation among different cell morphologies as well as the changes in cell size and cell density, having impact on the performances, is described. Second, the influence of stereo-complex crystals on the cell structure of PPMs is emphatically reviewed. Furthermore, the relationships between cell structure and properties that includes mechanical properties, thermal stability, heat insulation, and hydrophobicity, are elaborated. Eventually, the issues of PPMs worthy of further study are discussed.

SHP2 inhibition improves celastrol-induced growth suppression of colorectal cancer.

This study aimed to explore novel targets for celastrol sensitization in colorectal cancer (CRC) based on differentially regulated signals in response to high- or low-dose celastrol. Targeting signals were investigated using Western blotting or phosphorylated receptor tyrosine kinase (RTK) arrays. Corresponding inhibitors for the signals were individually combined with low-dose celastrol for the assessment of combined anti-CRC effects, based on proliferation, apoptosis, colony assays, and xenograft models. The potential mechanism for the combination of celastrol and SHP2 inhibition was further examined. Low-dose celastrol (<1 µM) did not effectively suppress AKT and ERK signals in CRC cells compared to high-dose celastrol (>1 µM). However, when combined with an AKT or ERK inhibitor, low-dose celastrol could cooperatively suppress CRC proliferation. Furthermore, failed AKT or ERK inhibition by low-dose celastrol may be due to reactivated RTK-SHP2 signaling with negative feedback. The combination of celastrol and the SHP2 inhibitor resulted in greatly reduced AKT and ERK signals, as well as greater inhibition of CRC growth than celastrol alone. Moreover, the mechanism underlying combination suppression was also involved in the activation of immune cell infiltration (mainly for CD8+ cells) in CRC tissues. Failure to inhibit RTK-SHP2-AKT/ERK signaling contributed to the lack of CRC growth suppression by low-dose celastrol. However, the combination of celastrol and the SHP2 inhibitor resulted in synergistic inhibition of CRC growth and provided a promising therapeutic target.

Simple Design of a Porous Solar Evaporator for Salt-Free Desalination and Rapid Evaporation.

Solar-driven interfacial evaporation is considered to be one of the promising and efficient ways of producing clean water in recent years. However, it remains a challenge to develop solar evaporation devices with high solar evaporation rates and salt-free blocking properties. Here, a porous solar evaporator with directed water transport and salt-free desalination through excellent photothermal conversion and purposefully guided migration of the salt solution was developed. The designed porous photothermal sponge with the synergistic effect of MXene and polypyrrole can achieve evaporation rates of 1.47 and 2.27 kg m-2 h-1, respectively, in the capillary model and siphon model water-transporting solar evaporation devices. More interestingly, the designed zigzag-shaped device with an evaporation rate of 2.45 kg m-2 h-1 was achieved. In addition, the evaporator can operate stably under 9 h in the siphon model solar evaporation device and achieves the effect of salt-free desalination. The above design provides a good strategy for solar-powered desalination applications.

Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth.

The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot. Here, the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of melamine foam (MF) through electrostatic self-assembly and dip-coating adsorption process, realizing the integration of microwave absorption, infrared stealth, and flame retardant. Remarkably, the Ni/MXene-MF achieves a minimum reflection loss (RLmin) of - 62.7 dB with a corresponding effective absorption bandwidth (EAB) of 6.24 GHz at 2 mm and an EAB of 6.88 GHz at 1.8 mm. Strong electromagnetic wave absorption is attributed to the three-dimensional magnetic/conductive networks, which provided excellent impedance matching, dielectric loss, magnetic loss, interface polarization, and multiple attenuations. In addition, the Ni/MXene-MF endows low density, excellent heat insulation, infrared stealth, and flame-retardant functions. This work provided a new development strategy for the design of multifunctional and efficient electromagnetic wave absorbing materials.

Therapeutic Suppression of FAK-AKT Signaling Overcomes Resistance to SHP2 Inhibition in Colorectal Carcinoma.

SHP2 mediates signaling from multiple receptor tyrosine kinases (RTKs) to extracellular signal-regulated kinase (ERK) and Ser and Thr kinase AKT, and its inhibitors offer an unprecedented opportunity for cancer treatment. Although the ERK signaling variation after SHP2 inhibition has been well investigated, the AKT signaling variation in colorectal carcinoma (CRC) is still unknown. Therefore, we performed immunohistochemistry and bioinformatics analyses to explore the significance of p-SHP2 in CRC. A panel of CRC cell lines with the SHP2 inhibitor, SHP099, was used to assess the effects on viability and signaling. The inhibitors of AKT and focal adhesion kinase (FAK) signaling were examined in combination with SHP099 as potential strategies to enhance the efficacy and overcome resistance. Frequent resistance to the SHP2 inhibitor was observed in CRC cells, even in those without RAS mutations. We observed rapid adaptive reactivation of the AKT pathway in response to SHP2 inhibition, possibly driven by the reactivation of RTKs or released p-FAK. High baseline p-FAK may also be associated with CRC cell resistance to SHP2 inhibition. Co-inhibition of FAK abrogated the feedback reactivation of AKT in response to SHP2 inhibition. Moreover, the combined inhibition of SHP2 with AKT or FAK resulted in sustained AKT pathway suppression and improved antitumor efficacy in vitro and in vivo. Our study found that reactivation of the AKT pathway is a key mechanism of adaptive resistance to SHP2 inhibition, highlighting the potential significance of AKT and FAK inhibition strategies to enhance the efficacy of SHP2 inhibitors in CRC treatment.

Flexible Ag Microparticle/MXene-Based Film for Energy Harvesting.

Ultra-thin flexible films have attracted wide attention because of their excellent ductility and potential versatility. In particular, the energy-harvesting films (EHFs) have become a research hotspot because of the indispensability of power source in various devices. However, the design and fabrication of such films that can capture or transform different types of energy from environments for multiple usages remains a challenge. Herein, the multifunctional flexible EHFs with effective electro-/photo-thermal abilities are proposed by successive spraying Ag microparticles and MXene suspension between on waterborne polyurethane films, supplemented by a hot-pressing. The optimal coherent film exhibits a high electrical conductivity (1.17×104 S m-1), excellent Joule heating performance (121.3 °C) at 2 V, and outstanding photo-thermal performance (66.2 °C within 70 s under 100 mW cm-1). In addition, the EHFs-based single-electrode triboelectric nanogenerators (TENG) give short-circuit transferred charge of 38.9 nC, open circuit voltage of 114.7 V, and short circuit current of 0.82 µA. More interestingly, the output voltage of TENG can be further increased via constructing the double triboelectrification layers. The comprehensive ability for harvesting various energies of the EHFs promises their potential to satisfy the corresponding requirements.

Asymmetric Superhydrophobic Textiles for Electromagnetic Interference Shielding, Photothermal Conversion, and Solar Water Evaporation.

Flexible and multifunctional textiles have potential applications in self-cleaning and portable electronic product applications, but the current problem that needs to be solved is to maintain their inherent breathability and flexibility while expanding other functional applications. Herein, we adopt the layer-by-layer assembly method to develop a multifunctional textile with superior asymmetric superhydrophobicity, excellent electromagnetic interference (EMI) shielding, outstanding photothermal conversion, and solar water evaporation. The synergistic effect of SiO2 nanoparticles/poly(dimethylsiloxane) (PDMS) and 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFOTES) endows the textile with a water contact angle of 160°. MXene provides high conductivity (1200 S/m) and EMI shielding effects (36 dB) for multifunctional textiles. In addition, the multifunctional textile exhibits excellent photothermal conversion, and satisfactory solar water evaporation efficiency (80%) and rate (1.22 kg/(m2 h)) under 1 sun. Therefore, the prepared multifunctional textile has great potential in multiscene applications.

High expression of SH2B adaptor protein 1 (SH2B1) indicates poor prognosis in colorectal cancer.

SH2B1, an adaptor protein associated with obesity, is closely related to the occurrence and development of a variety of tumors. To investigate the clinical significance of SH2B1 in colorectal cancer (CRC), expression of SH2B1 in colorectal normal tissues, adenomas, paracarcinoma tissues, carcinoma tissues, and metastatic tissues from 1003 CRC patients was detected by immunohistochemistry (IHC). The prediction power of SH2B1 for CRC prognosis was evaluated by Kaplan-Meier survival analysis and Cox regression model. Results revealed the expression of SH2B1 in carcinoma tissues was significantly higher than that in other tissues. High expression of SH2B1 was an independent risk factor for both disease-free survival (DFS) and disease-specific survival (DSS) and predicted unfavorable prognosis of CRC as well as poor chemotherapeutic response. Conclusively, SH2B1 can serve as an effective predictor for CRC survival and chemotherapeutic outcomes.

Low tumour PPM1H indicates poor prognosis in colorectal cancer via activation of cancer-associated fibroblasts.

BACKGROUND: Vimentin (VIM) is considered a prognostic marker in colorectal cancer (CRC). Our aim is to identify genes that fulfil a "X-low implies VIM-high" Boolean relationship and to evaluate their prognostic value and potential mechanism. METHODS: Potential biomarkers related to VIM expression were searched using a bioinformatics approach across gene-expression arrays. Based on subgroup analysis of 2 CRC cohorts, the selected gene was tested for its association with patient's survival outcomes. The regulatory link between the selected gene and VIM was further examined with in vitro models. RESULTS: PPM1H was identified as the top candidate in our search. Patients with PPM1H-low tumours have a lower 5-year disease-free survival rate than patients with PPM1H-high tumours in 2 independent cohorts. In multivariate Cox analysis, patients with PPM1H-low tumours were independently associated with relapse in both the discovery cohort (hazard ratio [HR], 1.362; 95% confidence interval [CI], 1.015-1.826; P = 0.039) and the validation cohort (HR for DFS, 4.052; 95% CI, 2.634-6.234; P < 0.001). PPM1H knockdown in CRC cells and growth in the corresponding conditional medium increased VIM expression and colon fibroblast proliferation, indicating a transformation of cancer-association fibroblasts (CAFs). Conversely, educated CAFs also facilitated the growth of CRC cells with low PPM1H expression. CONCLUSIONS: Lack of tumour PPM1H expression identifies a patient subgroup with a high relapse risk, and CRC cells with low expression of PPM1H activate CAFs and inversely get promoted by CAFs.

Facile Fabrication of Superhydrophobic and Eco-Friendly Poly(lactic acid) Foam for Oil-Water Separation via Skin Peeling.

Superhydrophobic polymer foams are a good candidate for oil absorption because of their lightweight and tunable porosity and have promising applications in the long-term application of oil-water separation. However, developing a facile and green strategy to fabricate pure polymer foams with superhydrophobicity and eco-friendliness for large-scale oil-water separation remains a challenge. Here, a facile template-free water-assisted thermally impacted phase separation approach combined with skin peeling for the fabrication of superhydrophobic and eco-friendly pure poly(lactic acid) (PLA) foam for oil-water separation is proposed for the first time. The PLA foam with special micro- and nanostructures possesses a water contact angle of 151°, and the maximum saturated adsorption capacity is 31.5 g/g. More importantly, during the continuous oil-water pumping experiment, the foam has an efficiency of 98% and could maintain for more than 15 h, showing a promising prospect for cleaning large-scale oil pollution.

Facile Thermally Impacted Water-Induced Phase Separation Approach for the Fabrication of Skin-Free Thermoplastic Polyurethane Foam and Its Recyclable Counterpart for Oil-Water Separation.

Developing a facile large-scale strategy to fabricate polymer foams with excellent wettability and recycling its counterpart for oil-water separation is in urgent demand. Here, a facile template-free thermally impacted water-induced phase separation approach for the fabrication of skin-free thermoplastic polyurethane foam with a water contact angle of 147°, porosity more than 90%, density less than 14 mg cm-3 , and excellent compressibility (>1000 cycles) is proposed. The foams show high efficiency of oil recovery (>98%) during the squeezing and pumping oil-water separation test. Moreover, the used foams could be recycled and reused to form refresh foams without sacrificing their high performance, which makes this method a promising prospect for environmental applications.

Prognostic significance of the infiltration of CD163+ macrophages combined with CD66b+ neutrophils in gastric cancer.

The polarization of tumor-associated macrophages (TAMs) and tumor-associated neutrophils (TANs), especially from the antitumoral phenotype to the protumoral phenotype under certain conditions, has an important influence on the progression of tumors. However, the interactions and combined prognosis of these cells are poorly known. Here, we detected the infiltration of CD68+ TAMs, CD163+ TAMs, and CD66b+ TANs in the specimens from 662 patients with GC by immunohistochemistry. The results showed that the infiltration of each of CD163+ , CD68+ , and CD66b+ cells in GC tissue was significantly increased and independently associated with GC prognosis. Strong collinearity (r = 0.690, P < 0.001) was found between the infiltration of CD163+ and CD68+ cells in GC, and multivariate Cox analysis confirmed the infiltration of CD163+ cells was a better predictor for prognosis than that of CD68+ cells. The combination of the infiltration of CD163+ and CD66b+ cells provided more accurate survival prediction than any individual marker. Patient subgroups with CD66blow CD163low (hazard ratio (HR) = 2.161; 95% confidence interval (CI)  = 1.266-3.688; P < 0.001), CD66bhigh CD163high (HR = 3.575; 95% CI = 2.155-5.933; P < 0.001), and CD66blow CD163high (HR = 7.514; 95% CI = 4.583-12.312; P < 0.001) were gradually associated with shorter DFS when compared with the subgroup with CD66bhigh CD163low . The similar result was also for DSS among the subgroups. Moreover, the two-marker model could more effectively discriminate the prognosis among the patients with chemotherapy than that among those without chemotherapy. We concluded that CD163+ TAMs were a more valuable prognostic marker than CD68+ TAMs, and CD163+ TAMs combined with CD66b+ TANs could more precisely predict the prognosis of patients with GC.

SHP2 associates with nuclear localization of STAT3: significance in progression and prognosis of colorectal cancer.

Tyrosine phosphatase SHP2, encoded by PTPN11, has been implicated in many physiologic and pathologic processes in neoplastic progression. However, controversies are emerging from many studies, indicating SHP2 has a dual role in different types of tumors. We aimed to explore the role of SHP2 in progression and prognosis of colorectal cancer (CRC). SHP2 inhibited CRC cell proliferation and migration, and the phosphorylation of STAT3 was negatively regulated by SHP2 in CRC. SHP2 and nuclear STAT3 were examined in 270 CRC tissues. SHP2 was significantly correlated with nuclear STAT3 (Spearman's rho = -0.408, P ≤ 0.001). Based on Cox regression analysis, patients with high levels of SHP2 and low levels of nuclear STAT3 had longer disease-specific survival (DSS) (HR, 0.362; 95% CI, 0.165-0.794) and disease-free survival (DFS) (HR, 0.447; 95% CI, 0.227-0.877). Further, low levels of SHP2 and high levels of nuclear STAT3 were independently associated with adverse outcomes in the whole cohort (DFS; HR, 2.353; 95% CI, 1.199-4.619). These results suggest that combination of SHP2 and nuclear STAT3 is a strong prognostic predictor in CRC.

p53/microRNA-374b/AKT1 regulates colorectal cancer cell apoptosis in response to DNA damage.

Colorectal cancer (CRC) has a rising morbidity worldwide and its resistance to chemotherapy has been observed in clinical treatment. Tumor suppressor p53 is well-studied in CRC, but little is known about its effects during DNA damage of CRC cells. This study was aimed at uncovering potential mechanisms of p53 regarding microRNA-374b and v-akt murine thymoma viral oncogene homolog 1 (AKT1) during DNA damage of CRC cells. CRC cells HCT116 and HT29 were transfected with p53-specific small interfering RNA (siRNA), p53 overexpression vector or miR-374b inhibitor, and then treated with 10 µM bleomycin (BLM) for 24 h to induce DNA damage. Primary (pri), precursor (pre) and mature miR-374b levels were quantified by qRT-PCR. AKT1 and p53 protein levels were detected by western blotting. Cell apoptosis changes were assessed by flow cytometry. AKT1 mRNA was detected to be induced by BLM treatment (P<0.05), but its protein level was strongly inhibited. Knockdown of p53 reversed the inhibition of AKT1 protein by BLM. Overexpression of p53 in p53-knockout HCT116 and HT29 cells upregulated the AKT1 regulator miR-374b (P<0.05), and knockdown of p53 reversed the induction of miR-374b by BLM. qRT-PCR suggested that besides mature miR-374b, p53 could also promote pre-miR-374b level (P<0.05), rather than pri-miR-374b. Moreover, inhibition on miR-374b relieved the suppressed AKT1 protein, and reduced cell apoptosis induced by BLM. These data depict the p53/miR-374b/AKT1 signaling that may regulate BLM-induced apoptosis in CRC cells, thus facilitating to improve the outcome of chemotherapy in CRC.