RESUMO
The higher operating temperature of metal oxide and air instability of organic based NO2 sensor causes extremely urgent for development of a reliable low cost sensor to detect NO2 at room temperature. Therefore, we present a fabrication of large area Polymer/GO nano hybrid thin film for polymer thin film transistors (PTFTs) based NO2 sensors assisted via facile method named 'spreading-solidifying (SS) method', grown over air/liquid interface and successive investigation of effect of NO2 on film via several characterizations. The PTFTs sensor has demonstrated swift and high response towards low concentration of NO2 gas with air stability and provided real time non-invasive type NO2 sensor. Herein, we are reporting the nanohybrid PBTTT/GO composite based PTFT sensor with good repeatability and sensor response for low concentration NO2. The thin film grown via SS technique has reported very good adsorption/desorption of target analyte having response/recovery time of 75 s/523 s for 10 ppm concentration of NO2 gas. It has been observed that % change in drain current (sensor response) saturated with increasing concentration of NO2. The transient analysis demonstrates the fast sensor response and recovery time. Furthermore, in order to understand the insight of high performance of sensor, effect of NO2 on nanohybrid film and sensing mechanism, an in situ investigations was conducted via multiple technique viz. spectral, electronic, structural, and morphological characterization. Finally, the performance of sensor and the site of adsorption of NO2 at polymer chains were argued using schematic diagram. This work shows the simple fabrication process for mass production, low cost and room temperature operated gas sensors for monitoring the real-time environment conditions and gives an insight about the sensing mechanism adsorption site of NO2.
RESUMO
The coupling of organic molecule excitons with metal nano-structure surface plasmons can improve the performance of optoelectronic devices. This paper presents the effect of localized silver metal surface plasmons on spectral as well as charge transport properties of ordered molecular Langmuir Schaefer (LS) films of a fluorescent conducting multifunctional organic polymer: poly (3,3'''-dialkylquarterthiophene) [PQT-12]. The stability and thickness of the PQT-12 LS film were studied by the pressure vs. area isotherm curve. Atomic force microscopy images indicate the formation of a smooth ordered polymer thin LS film of PQT-12 over silver nanostructure island films [SNIF] (â¼40 to 50 nm in size). Raman, electronic absorption and fluorescence spectral measurements of the PQT-12 LS film, near SNIF i.e. the near field, show a plasmon coupled enhancement of â¼13 fold in the intensity of Raman bands along with a two-fold enhancement in the absorption band (531 nm) and a six-fold enhancement in the fluorescence band (665 nm) coupled with a decrease in fluorescence decay time with improved photostability as compared to an identical control sample containing no SNIF i.e. the far field condition. These results indicate the formation of a plasmon coupled unified fluorophore system due to adsorption of the PQT-12 LS film over SNIF. The effect of plasmonic coupling is also studied by applying an electric field in sandwiched structures of Al/PQT-12 LS/SNIF/ITO with respect to Al/PQT-12 LS/ITO. Nearly three orders of magnitude enhancement in the current density (J-V plot) of the PQT-12 LS film is observed in the presence of SNIF, which further increases, on illuminating the film by green laser light [532 nm], while the fluorescence intensity and decay time decrease. X-ray photoelectron spectroscopic measurements of SNIF also show a red shift in 3d3/2 and 3d5/2 transitions of silver in the PQT-12 coated LS film, which indicates partial charge transfer from the PQT-12 polymer backbone to SNIF and causes an enhancement in conductivity. This again supports the formation of a field controlled radiating plasmon coupled fluorophore unified system. These findings show greater potential in developing a voltage controlled high photon flux electroluminescent material for multifarious applications.
