RESUMO
In this study, the impact of surfactants on the adsorption behavior of Pb(II) onto microplastics-sediment (MPs-S) complexes was investigated. Firstly, virgin polyamide (VPA) and polyethylene (VPE) were placed in Xiangjiang River sediment for six months to conduct in-situ aging. The results indicated that the biofilm-developed polyamide (BPA) and polyethylene (BPE) formed new oxygen-containing functional groups and different biofilm species. Furthermore, the adsorption capacity of Pb(II) in sediment (S) and MPs-S complexes was in the following order: S > BPA-S > VPE-S > VPA-S > BPE-S. The addition of sodium dodecyl benzenesulfonate (SDBS) promoted the adsorption of Pb(II), and the adsorption amount of Pb(II) increased with the higher concentration of SDBS, while adding cetyltrimethylammonium bromide (CTAB) showed the opposite result. The adsorption process of MPs-S complexes to Pb(II) was dominated by chemical adsorption, and the interaction between MPs-S complexes and Pb(II) was multilayer adsorption involving physical and chemical adsorption when the surfactants were added. Besides, the pH exerts a significant effect on Pb(II) adsorption in different MPs-S complexes, and the highest adsorption amount occurred at pH 6. Noteworthy, CTAB promoted the adsorption ability of Pb(II) when the exogenous FA was added. The binding characteristic of sediment endogenous DOM components and Pb(II) was influenced by the addition of MPs and surfactants. Finally, it confirmed that adsorption mechanisms mainly involve electrostatic and hydrophobic interaction. This study provides a new perspective to explore the environmental behaviors of Pb(II) by MPs and sediments with the addition of surfactants, which was conducive to evaluating the ecological risks of MPs and heavy metals in aquatic environments.
RESUMO
The coexistence of microplastics (MPs) and heavy metals in sediments has caused a potential threat to sediment biota. However, differences in the effects of MPs and heavy metals on microbes and plants in sediments under different sediment conditions remain unclear. Hence, we investigated the influence of polyethylene (PE) and polylactic acid (PLA) MPs on microbial community structure, Pb bioavailability, and wheatgrass traits under sequential incubation of sediments (i.e., flood, drainage, and planting stages). Results showed that the sediment enzyme activities presented a dose-dependent effect of MPs. Besides, 10 % PLA MPs significantly increased the F1 fractions in three stages by 11.13 %, 30.10 %, and 17.26 %, respectively, thus resulting in higher Pb mobility and biotoxicity. MPs altered sediment bacterial composition and structures, and bacterial community differences were evident in different incubation stages. Moreover, the co-exposure of PLA MPs and Pb significantly decreased the shoot length and total biomass of wheatgrass and correspondingly activated the antioxidant enzyme activity. Further correlation analysis demonstrated that community structure induced by MPs was mainly driven by sediment enzyme activity. This study contributes to elucidating the combined effects of MPs and heavy metals on sediment ecosystems under different sediment conditions.
Assuntos
Sedimentos Geológicos , Chumbo , Microplásticos , Poluentes Químicos da Água , Sedimentos Geológicos/microbiologia , Chumbo/toxicidade , Microplásticos/toxicidade , Poluentes Químicos da Água/toxicidade , Microbiota/efeitos dos fármacos , Poliésteres , Polietileno/toxicidade , Inundações , Bactérias/efeitos dos fármacosRESUMO
Activated sludge method is an effective method for the wastewater treatment and has been widely applied. Activated sludge usually exists in various forms such as activated sludge floc, biofilm and granule. Due to the different character and function for each sludge type, the role and mechanism in the wastewater treatment process are also different, but all were crucial. The quorum sensing (QS) /quorum quenching (QQ) have been demonstrated and proved to regulate the group behavior by secreting signaling molecules among microorganisms and thus affect the manifestation of sludge. However, the complex mechanisms and regulatory strategies of QS/QQ in sludge forms have not been systematically summarized. This review provided an overview on the mechanism of QS/QQ shaping sludge forms from macro to micro (Explore it through signaling molecules, extracellular polymeric substances and microorganisms). In addition, the application and challenges of QS/QQ regulating sludge forms in various wastewater treatment processes including biofilm batch reactor, granule sludge and membrane bioreactor were discussed. Finally, some suggestions for further research and development of effective and economical QS/QQ strategies are put forward.
Assuntos
Reatores Biológicos , Percepção de Quorum , Esgotos , Eliminação de Resíduos Líquidos , Esgotos/microbiologia , Eliminação de Resíduos Líquidos/métodos , Biofilmes , Águas Residuárias/microbiologiaRESUMO
Microplastics (MPs) pollution is widely investigated owing to its potential threats to river ecosystems. However, it remains unclear whether hydraulic disturbance deepens or mitigates the effects of MPs-contaminated sediments on the river environment. Herein, we studied the impact of sediment aggregates, organic matter, and enzyme activity, with emphasis on microbial community structure and function in sediments exposed to MPs (1 %, 5 %, and 10 % w/w) in conjunction with hydraulic disturbance. The experimental results showed that the influence of MPs on the sediment under hydraulic disturbance is more significant than that of static culture, especially for various environmental factors (MWD, MBC, and sucrase activity etc.). The proportions of the >0.05 mm-fraction aggregates increased from 74-76 % to 82-88 % in the sediment throughout the entire disturbance process. It has been found that the disturbance generally promotes the interaction between MPs and sediments. FAPROTAX analysis demonstrated that the disturbance reduced the difference in effects on microbial functional genes between the control group and the MPs-added groups by up to 10 times, suggesting that the effects of disturbance on MPs-contaminated sediments are relatively complex. This work provides new insights into the effects of hydraulic disturbance on physicochemical properties and microbial communities of MPs-contaminated sediment.
Assuntos
Microbiota , Poluentes Químicos da Água , Microplásticos , Plásticos , Poluição Ambiental , Rios , Sedimentos Geológicos , Monitoramento AmbientalRESUMO
Significant progress has been made in mitigating membrane biofouling by microbial quorum quenching (QQ). More efficient and survivable QQ strains need to be discovered. A new strain named Bacillus thuringiensis LZX01 was isolated in this study using a low carbon source concentration "starving" method from a membrane bioreactor (MBR). LZX01 secreted intracellular lactonase to enable QQ behavior and was capable of degrading 90 % of C8-HSL (200 ng/mL) within 30 min, which effectively delayed biofouling by inhibiting the growth of bacteria associated with biofouling and improving the hydrophilicity of bound extracellular polymeric substances. As a result, the membrane biofouling rate of MBR adding LZX01 was four times slower than that of the control MBR. Importantly, LZX01 maintains its QQ activity even in environments contaminated with typical toxic pollutants. Therefore, with high efficiency, toxicity resistance, and easy culture, LZX01 holds great potential and significant promise for biofouling control applications.
Assuntos
Bacillus thuringiensis , Incrustação Biológica , Incrustação Biológica/prevenção & controle , Percepção de Quorum , Reatores Biológicos/microbiologia , Matriz Extracelular de Substâncias Poliméricas , Membranas ArtificiaisRESUMO
Microplastics (MPs) accumulation in sediments has posed a huge threat to freshwater ecosystems. However, it is still unclear the effect of MPs on riparian sediment structures and contaminant adsorption under different hydrological processes. In this study, three concentrations of polyamide (PA) MPs-treated sediments (0.1%, 1%, and 10%, w/w) were subjected to natural (NA) exposure, dry-wet (DW) cycles, and freeze-thaw (FT) cycles. The results indicated that PA MPs-added sediment increased the micro-aggregates by 10.1%-18.6% after FT cycles, leading to a decrease in aggregate stability. The pH, OM, and DOC of sediments were significantly increased in DW and FT treatments. In addition, the increasing concentration of PA MPs showed an obvious decrease in aromaticity, humification, and molecular weight of sediment DOM in FT treatments. Also, high level of MPs was more likely to inhibit the formation of humic-like substances and tryptophan-like proteins. For DW and FT cycles, 0.1% and 1% PA MPs-treated sediments slightly increased the adsorption capacity of Cd(II), which may be ascribed to the aging of MPs. Further correlation analysis found that DW and FT altered the link between DOM indicators, and aggregate stability was directly related to the changes in sediment organic carbon. Our findings revealed the ecological risk of MPs accumulating in riparian sediments under typical hydrological processes.
RESUMO
Microplastics pollution has attracted worldwide attention in recent years due to their wide distribution and severe threat to biota. Additionally, microplastics will undergo serious aging effects after being discarded into the environment. Aging can change surface properties and affect the environmental behavior of microplastics. However, information on the aging process and influencing factors of microplastics are still limited. This review summarized recently reported characterization methods, and aging means of microplastics. Subsequently, the corresponding aging mechanisms (abrasion, chemical oxidation, light irradiation, and biodegradation) and the intervention mechanism of environmental factors are revealed, which is helpful to understand the environmental aging processes and ecological risks of microplastics. Besides, to further comprehend the potential environmental toxicity of microplastics, the article also outlined the release of additives during aging. This paper provides reference directions for further study on aging microplastics through a systematic review. Future research works should further facilitate the development of technologies to identify aged microplastics. And more attention needs to focus on narrowing the gap between laboratory aging simulation and the natural environment, thereby enhancing research authenticity and environmental relevance.
Assuntos
Microplásticos , Poluentes Químicos da Água , Plásticos/toxicidade , Poluentes Químicos da Água/análise , Monitoramento Ambiental , Biodegradação AmbientalRESUMO
Bacterial quorum quenching (QQ) is an effective strategy for controlling biofouling in membrane bioreactor (MBR) by interfering the releasing and degradation of signal molecules during quorum sensing (QS) process. However, due to the framework feature of QQ media, the maintenance of QQ activity and the restriction of mass transfer threshold, it has been difficult to design a more stable and better performing structure in a long period of time. In this research, electrospun fiber coated hydrogel QQ beads (QQ-ECHB) were fabricated by using electrospun nanofiber coated hydrogel to strengthen layers of QQ carriers for the first time. The robust porous PVDF 3D nanofiber membrane was coated on the surface of millimeter-scale QQ hydrogel beads. Biocompatible hydrogel entrapping quorum quenching bacteria (sp.BH4) was employed as the core of the QQ-ECHB. In MBR with the addition of QQ-ECHB, the time to reach transmembrane pressure (TMP) of 40 kPa was 4 times longer than conventional MBR. The robust coating and porous microstructure of QQ-ECHB contributed to keeping a lasting QQ activity and stable physical washing effect at a very low dosage (10g beads/5L MBR). Physical stability and environmental-tolerance tests also verified that the carrier can maintain the structural strength and keep the core bacteria stable when suffering long-term cyclic compression and great fluctuations in sewage quality.
Assuntos
Incrustação Biológica , Percepção de Quorum , Incrustação Biológica/prevenção & controle , Membranas Artificiais , Esgotos/microbiologia , Bactérias/metabolismo , Reatores Biológicos/microbiologiaRESUMO
Microplastics (MPs) are able to interact with diverse contaminants in sediments. However, the impacts of MPs on sediment properties and bacterial community structure in heavy metal-contaminated sediments remain unclear. In this study, we investigated the adsorption of Pb(II) by sediment-MPs mixtures and the effects of different concentration MPs on sediment enzyme activities, DOM fractions, and Pb bioavailability in riverine sediments, and further explored the response of sediment microbial community to Pb in the presence of MPs. The results indicated that the addition of MPs significantly decreased the adsorption amount of Pb(II) by sediments, especially decreased by 12.6% at 10% MPs treatment. Besides, the changes in enzyme activities, DOM fractions exhibited dose-dependent effects of MPs. The higher level of MPs (5% and 10%) tends to transform Pb into more bioavailable fractions in sediments. Also, MPs amendment was observed to alter sediment bacterial community structures, and community differences were evident in the uncontaminated and lead-contaminated sediments. Therein, significant increase of Bacteroidota, Proteobacteria and decrease of Firmicutes abundance in Pb-contaminated sediment at the phylum level were observed. These findings are expected to provide comprehensive information for assessing the combined ecological risks of heavy metals and MPs in riverine sediments.
Assuntos
Metais Pesados , Microbiota , Poluentes Químicos da Água , Microplásticos , Plásticos , Chumbo/toxicidade , Metais Pesados/análise , Sedimentos Geológicos/química , Poluentes Químicos da Água/toxicidade , Poluentes Químicos da Água/análiseRESUMO
g-C3N4/Ag3PO4/TiO2 nanocomposite materials were loaded onto a polyvinylidene fluoride (PVDF) membrane using a phase inversion method to obtain a photocatalytic flat membrane for dye removal. The morphology, structure, and photocatalytic activity of the g-C3N4/Ag3PO4/TiO2 nanoparticles and composite membrane were evaluated. The g-C3N4/Ag3PO4/TiO2/PVDF membrane exhibited superior morphology, hydrophilic properties, and antifouling performance compared with the raw PVDF membrane. Four-stage filtration was performed to evaluate the self-cleaning and antifouling capacity of the g-C3N4/Ag3PO4/TiO2/PVDF membrane. Upon irradiating the composite membrane with visible light for 30 min, its irreversible fouling resistance (Rir) was low (9%), and its flux recovery rate (FRR) was high (71.0%) after five filtration cycles. The removal rate of rhodamine B (RhB) from the composite membrane under visible light irradiation reached 98.1% owing to the high photocatalytic activity of the membrane, which was superior to that of raw PVDF membrane (42.5%). A mechanism of photocatalytic composite membranes for RhB degradation was proposed. Therefore, this study is expected to broaden prospects in the field of membrane filtration technology.
Assuntos
Polivinil , Catálise , Polivinil/química , RodaminasRESUMO
Due to the mass production and daily use of plastic products, the potential toxicity of microplastics to the water environment has attracted worldwide attention. In this work, the effect of typical microplastics (PET) on the performance of activated sludge from membrane bioreactors (MBR) was evaluated. The impacts on biological removal efficiency were unconspicuous with continuous dosing of 60 particles/L. However, further investigations revealed that PET particle accumulation caused adverse impacts on settleability and dewaterability. The SVI value increased from 53.3 ml/g MLSS to 69.9 ml/g MLSS and the CST in the PET reactor increased by 22%. Nevertheless, hydrophobicity was reduced by 49.2%. Mechanism studies exposed that the PET microplastics accumulation improved extracellular polymeric substances (EPS) from 116.96 mg/L to 138.70 mg/L and caused cell membrane damage. The abundance and diversity of microbial community reduced in activated sludge in PET reactor compared with control reactor. These phenomena revealed a possible hypothesis that the microplastic particles increased EPS and cytotoxicity of activated sludge. However, the rate of transmembrane pressure (TMP) build-up was significantly mitigated in PET-MBR compared to that in a control-MBR (1.27 folds), which attributes that physical scour of particles may still alleviate membrane contamination in MBR.
Assuntos
Microplásticos , Esgotos , Microplásticos/toxicidade , Plásticos , Polietilenotereftalatos , Membranas Artificiais , Reatores Biológicos , ÁguaRESUMO
In this study, the adsorption behavior of Pb(II) on natural-aged and virgin microplastics in different electrolyte solutions was investigated. The results demonstrated that natural-aged microplastics exhibited higher adsorption capacity for Pb(II) compared to virgin ones, and the addition of CaCl2 strongly inhibited the adsorption amount of Pb(II). The adsorption kinetics of Pb(II) adsorption were better fitted by the pseudo-second order model and Elovich equation, and were slowed down greatly at higher ionic strength. The rate-limiting steps of adsorption process were dominated by intra-particle diffusion. The adsorption isotherm of Pb(II) onto microplastics affected by salt ions can be well described by Freundlich model, the greater adsorption efficiency of natural-aged microplastics proved that adsorption process was multilayer and heterogeneous. In addition, pH significantly influenced the adsorption of Pb(II) due to the changes electrostatic interactions. The effect of fulvic acid in the electrolyte solutions was also revealed and attributed to the complexation with Na+ and Ca2+. Furthermore, the higher pH and ionic strength in different environmental water dramatically decreased adsorption capacity onto microplastics. Finally, it's confirmed that the adsorption mechanisms affected by salt ions mainly involve electrostatic interaction, surface complexation, and ionic exchange. These findings indicate that salt ions exert an important influence on the adsorption of heavy metals for MPs, which should be further concerned.