Dynamic mechanical response and failure characteristics of coal and rock under saltwater immersion conditions.

The stability of coal and rock masses in water-rich mines is affected by both mine water erosion and dynamic disturbances. Thus, it is necessary to study the dynamic mechanical response and failure characteristics of coal and rock under the combination of saltwater and a high strain rate. To this end, a split Hopkinson pressure bar device was employed to investigate the effects of impact velocity, water content, and immersion liquid on the dynamic mechanical behaviours of coal and rock. The results revealed that the weakening effect of saltwater on the dynamic mechanical properties of coal and rock is much greater than that of distilled water. With increasing moisture content, the dynamic compressive strength of the coal specimens decreases monotonically, while that of the rock shows a trend of first increasing and then decreasing. The failure process and destruction of coal and rock are comprehensively affected by both the external impact load and the physical and mechanical properties of the material. The degree of damage of the coal and rock specimens increases with increasing impact velocity and water content. Moreover, the influence of various factors on the impact fracture mechanism of coal and rock under saltwater immersion conditions was revealed. These findings are highly important for the design and maintenance of underground coal and rock building structures.

The Interplay between Whey Protein Fibrils with Carbon Nanotubes or Carbon Nano-Onions.

Whey protein isolate (WPI) fibrils were prepared using an acid hydrolysis induction process. Carbon nanotubes (CNTs) and carbon nano-onions (CNOs) were made via the catalytic chemical vapor deposition (CVD) of methane. WPI fibril-CNTs and WPI fibril-CNOs were prepared via hydrothermal synthesis at 80 °C. The composites were characterized by SEM, TEM, FTIR, XRD, Raman, and TG analyses. The interplay between WPI fibrils and CNTs and CNOs were studied. The WPI fibrils with CNTs and CNOs formed uniform gels and films. CNTs and CNOs were highly dispersed in the gels. Hydrogels of WPI fibrils with CNTs (or CNOs) could be new materials with applications in medicine or other fields. The CNTs and CNOs shortened the WPI fibrils, which might have important research value for curing fibrosis diseases such as Parkinson's and Alzheimer's diseases. The FTIR revealed that CNTs and CNOs both had interactions with WPI fibrils. The XRD analysis suggested that most of the CNTs were wrapped in WPI fibrils, while CNOs were partially wrapped. This helped to increase the biocompatibility and reduce the cytotoxicity of CNTs and CNOs. HR-TEM and Raman spectroscopy studies showed that the graphitization level of CNTs was higher than for CNOs. After hybridization with WPI fibrils, more defects were created in CNTs, but some original defects were dismissed in CNOs. The TG results indicated that a new phase of WPI fibril-CNTs or CNOs was formed.