Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Atmos Pollut Res ; 13(10): 101566, 2022 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-36187213

RESUMO

The characteristics of black carbon (BC) aerosols, their sources, and their impact on atmospheric radiative forcing were extensively studied during the COVID-19 lockdown (28th March-31st May 2020) at a high-altitude rural site over the Western Ghats in southwest India. BC concentration and the contribution of BC originating from biomass burning (BCbb) estimated from the aethalometer model during the lockdown period were compared with the same periods in 2017 and 2018 and with the pre-lockdown period (1st February to March 20, 2020). BC concentrations were 44, 19, and 17% lower during the lockdown period compared with the pre-lockdown periods of 2020 and similar periods (28th March to 31st May) of 2017 and 2018, respectively. BCbb contributed ∼50% to total BC during the lockdown period of 2020 and compensated for the decrease in BC concentration due to lower traffic emissions. The characteristics of light-absorbing organic carbon (brown carbon; BrC) absorption at 370 nm were evaluated during the lockdown and the pre-lockdown periods of 2020, 2017, and 2018. The BrC was estimated to be the highest during the lockdown period of 2020. Finally, atmospheric radiative forcing was calculated using the mean BC concentration during the pre-lockdown, lockdown, and similar periods (28th March to 31st May) of 2017 and 2018.

2.
Sci Total Environ ; 654: 493-504, 2019 Mar 01.
Artigo em Inglês | MEDLINE | ID: mdl-30447588

RESUMO

Emission factors (EFs) of PM2.5, carbon fractions, major ionic (K+, Ca2+, NH4+, SO42-, NO3- and Cl-) and elemental (Al, Cr, Cu and Fe) species from combustion of commonly used household solid fuel were determined in 10 different states in India during cooking practices. The study involved sampling during actual household cooking involving use of a variety of fuels including coal balls (CB), fuel wood (FW), dung cakes (DC), crop residues (CR), mixed fuels (MF: dung cakes + fuel woods). Species-wise highest EFs (g·kg-1) were: 34.16 ±â€¯10.1 for PM2.5 (CB), 14.18 ±â€¯5.8 for OC (CB), 2.33 ±â€¯1.4 for EC (DC), 1.03 ±â€¯0.2 for K+ (CR), 2.21 ±â€¯0.6 NH4+ (DC), 0.61 ±â€¯0.2 for NO3- (CB), 0.59 ±â€¯0.1 for SO42- (CB), 0.69 ±â€¯0.1 for Cl- (CR) among the fuels. Higher OC EFs for CB could be attributed to higher moisture content (>13%) in coal-powder that is used to handmade coal balls. It is observed that, in general, OC3 and EC1 were the dominant thermally evolved carbon mass fractions. The study averaged MCE values were in the range 0.93-0.98, which could be attributed to higher variability in flaming and smoldering episodes during the combustion of selected fuels. Sum of ionic EFs for emissions from DC, CR and MF were found to be higher than those observed for FW and CB. The K+/EC and Cl-/EC (~1) ratios could be better indicators of CR fuels to differentiate it from FW, whereas NH4+/EC (~1) is suitable to indicate DC. Average annual emission estimates of PM2.5 (2.00 ±â€¯0.53 Tg·yr-1), OC (0.86 ±â€¯0.23 Tg·yr-1) and EC (0.11 ±â€¯0.02 Tg·yr-1) for tested fuels are evaluated to be contributing 27, 15 and 4% of total PM2.5, OC and EC, respectively, toward annual emission budget from different anthropogenic activities in India.

3.
Environ Geochem Health ; 40(5): 2205-2222, 2018 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-29603086

RESUMO

This study describes spatiotemporal patterns from October 2015 to September 2016 for PM2.5 mass and carbon measurements in rural (Kosmarra), urban (Raipur), and industrial (Bhilai) environments, in Chhattisgarh, Central India. Twenty-four-hour samples were acquired once every other week at the rural and industrial sites. Twelve-hour daytime and nighttime samples were acquired either a once a week or once every other week at the urban site. Each site was equipped with two portable, battery-powered, miniVol air samplers with PM2.5 inlets. Annual average PM2.5 mass concentrations were 71.8 ± 27 µg m-3 at the rural site, 133 ± 51 µg m-3 at the urban site, and 244.5 ± 63.3 µg m-3 at the industrial site, ~ 2-6 times higher than the Indian Annual National Ambient Air Quality Standard of 40 µg m-3. Average monthly nighttime PM2.5 and carbon concentrations at the urban site were consistently higher than those of daytime from November 2015 to April 2016, when temperatures were low. Annual average total carbon (TC = OC + EC) at the urban (46.8 ± 23.8 µg m-3) and industrial (98.0 ± 17.2 µg m-3) sites also exceeded the Indian PM2.5 NAAQS. TC accounted for 30-40% of PM2.5 mass. Annual average OC ranged from 17.8 ± 6.1 µg m-3 at the rural site to 64 ± 9.4 µg m-3 at the industrial site, with EC ranging from 4.51 ± 2.2 to 34.01 ± 7.8 µg m-3. The average OC/EC ratio at the industrial site (1.88) was 18% lower than that at the urban site and 52% lower than that at the rural site. OC was attributed to 43.0% of secondary organic carbon (SOC) at the rural site, twice that estimated for the urban and industrial sites. Mortality burden estimates for PM2.5 EC are 4416 and 6196 excess deaths at the urban and industrial sites, respectively, during 2015-2016.


Assuntos
Poluentes Atmosféricos/análise , Carbono/análise , Monitoramento Ambiental/métodos , Material Particulado/análise , Baías , Índia , Tamanho da Partícula , Estações do Ano , Temperatura
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...