Cordon-Bleu uses WH2 domains as multifunctional dynamizers of actin filament assembly.

Cordon-Bleu is, like Spire, a member of the growing family of WH2 repeat proteins, which emerge as versatile regulators of actin dynamics. They are expressed in morphogenetic and patterning processes and nucleate actin assembly in vitro. Here, we show that Cordon-Bleu works as a dynamizer of actin assembly by combining many properties of profilin with weak filament nucleating and powerful filament severing activities and sequestration of ADP-actin, which altogether generate oscillatory polymerization kinetics. A short lysine-rich sequence, N-terminally adjacent to the three WH2 domains, is required for nucleation and severing. In this context, nucleation requires only one WH2 domain, but filament severing requires two adjacent WH2 domains. A model integrating the multiple activities of Cordon-Bleu and quantitatively fitting the multiphasic polymerization curves is derived. Hence, with similar structural organization of WH2 repeats, Cordon-Bleu and Spire display different functions by selecting different sets of the multifunctional properties of WH2 domains.

How ATP hydrolysis controls filament assembly from profilin-actin: implication for formin processivity.

Formins catalyze rapid filament growth from profilin-actin, by remaining processively bound to the elongating barbed end. The sequence of elementary reactions that describe filament assembly from profilin-actin at either free or formin-bound barbed ends is not fully understood. Specifically, the identity of the transitory complexes between profilin and actin terminal subunits is not known; and whether ATP hydrolysis is directly or indirectly coupled to profilin-actin assembly is not clear. We have analyzed the effect of profilin on actin assembly at free and FH1-FH2-bound barbed ends in the presence of ADP and non-hydrolyzable CrATP. Profilin blocked filament growth by capping the barbed ends in ADP and CrATP/ADP-Pi states, with a higher affinity when formin is bound. We confirm that, in contrast, profilin accelerates depolymerization of ADP-F-actin, more efficiently when FH1-FH2 is bound to barbed ends. To reconcile these data with effective barbed end assembly from profilin-MgATP-actin, the nature of nucleotide bound to both terminal and subterminal subunits must be considered. All data are accounted for quantitatively by a model in which a barbed end whose two terminal subunits consist of profilin-ATP-actin cannot grow until ATP has been hydrolyzed and Pi released from the penultimate subunit, thus promoting the release of profilin and allowing further elongation. Formin does not change the activity of profilin but simply uses it for its processive walk at barbed ends. Finally, if profilin release from actin is prevented by a chemical cross-link, formin processivity is abolished.

Analysis of tetramethylrhodamine-labeled actin polymerization and interaction with actin regulatory proteins.

The hydrolysis of ATP accompanying actin polymerization destabilizes the filament, controls actin assembly dynamics in motile processes, and allows the specific binding of regulatory proteins to ATP- or ADP-actin. However, the relationship between the structural changes linked to ATP hydrolysis and the functional properties of actin is not understood. Labeling of actin Cys374 by tetramethylrhodamine (TMR) has been reported to make actin non-polymerizable and enabled the crystal structures of ADP-actin and 5'-adenylyl beta,gamma-imidodiphosphate-actin to be solved. TMR-actin has also been used to solve the structure of actin in complex with the formin homology 2 domain of mammalian Dia1. To understand how the covalent modification of actin by TMR may affect the structural changes linked to ATP hydrolysis and to evaluate the functional relevance of crystal structures of TMR-actin in complex with actin-binding proteins, we have analyzed the assembly properties of TMR-actin and its interaction with regulatory proteins. We show that TMR-actin polymerized in very short filaments that were destabilized by ATP hydrolysis. The critical concentrations for assembly of TMR-actin in ATP and ADP were only an order of magnitude higher than those for unlabeled actin. The functional interactions of actin with capping proteins, formin, actin-depolymerizing factor/cofilin, and the VCA-Arp2/3 filament branching machinery were profoundly altered by TMR labeling. The data suggest that TMR labeling hinders the intramolecular movements of actin that allow its specific adaptative recognition by regulatory proteins and that determine its function in the ATP- or ADP-bound state.

Mammalian twinfilin sequesters ADP-G-actin and caps filament barbed ends: implications in motility.

Twinfilins are conserved actin-binding proteins composed of two actin depolymerizing factor homology (ADF-H) domains. Twinfilins are involved in diverse morphological and motile processes, but their mechanism of action has not been elucidated. Here, we show that mammalian twinfilin both sequesters ADP-G-actin and caps filament barbed ends with preferential affinity for ADP-bound ends. Twinfilin replaces capping protein and promotes motility of N-WASP functionalized beads in a biomimetic motility assay, indicating that the capping activity supports twinfilin's function in motility. Consistently, in vivo twinfilin localizes to actin tails of propelling endosomes. The ADP-actin-sequestering activity cooperates with the filament capping activity of twinfilin to finely regulate motility due to processive filament assembly catalyzed by formin-functionalized beads. The isolated ADF-H domains do not cap barbed ends nor promote motility, but sequester ADP-actin, the C-terminal domain showing the highest affinity. A structural model for binding of twinfilin to barbed ends is proposed based on the similar foldings of twinfilin ADF-H domains and gelsolin segments.

Formin is a processive motor that requires profilin to accelerate actin assembly and associated ATP hydrolysis.

Motile and morphogenetic cellular processes are driven by site-directed assembly of actin filaments. Formins, proteins characterized by formin homology domains FH1 and FH2, are initiators of actin assembly. How formins simply bind to filament barbed ends in rapid equilibrium or find free energy to become a processive motor of filament assembly remains enigmatic. Here we demonstrate that the FH1-FH2 domain accelerates hydrolysis of ATP coupled to profilin-actin polymerization and uses the derived free energy for processive polymerization, increasing 15-fold the rate constant for profilin-actin association to barbed ends. Profilin is required for and takes part in the processive function. Single filaments grow at least 10 microm long from formin bound beads without detaching. Transitory formin-associated processes are generated by poisoning of the processive cycle by barbed-end capping proteins. We successfully reconstitute formin-induced motility in vitro, demonstrating that this mechanism accounts for the puzzlingly rapid formin-induced actin processes observed in vivo.

How VASP enhances actin-based motility.

The function of vasodilator-stimulated phosphoprotein (VASP) in motility is analyzed using a biomimetic motility assay in which ActA-coated microspheres propel themselves in a medium containing actin, the Arp2/3 complex, and three regulatory proteins in the absence or presence of VASP. Propulsion is linked to cycles of filament barbed end attachment-branching-detachment-growth in which the ActA-activated Arp2/3 complex incorporates at the junctions of branched filaments. VASP increases the velocity of beads. VASP increases branch spacing of filaments in the actin tail, as it does in lamellipodia in living cells. The effect of VASP on branch spacing of Arp2/3-induced branched actin arrays is opposed to the effect of capping proteins. However, VASP does not compete with capping proteins for binding barbed ends of actin filaments. VASP enhances branched actin polymerization only when ActA is immobilized on beads or on Listeria. VASP increases the rate of dissociation of the branch junction from immobilized ActA, which is the rate-limiting step in the catalytic cycle of site-directed filament branching.

ATP hydrolysis on actin-related protein 2/3 complex causes debranching of dendritic actin arrays.

Extension of lamellipodia, an important dissipative process in cell motility, is driven by the turnover of a polarized dendritic array of actin filaments. Motility is driven by catalytic cycles of filament attachment to Wiskott-Aldrich syndrome protein (WASP)-activated actin-related protein (Arp)2/3 complex at the leading edge, branch formation, and detachment, allowing subsequent growth of branched filaments. The morphology, mechanical strength, and lifetime of the array are determined by the processes of filament branching, debranching, and treadmilling. All three processes are controlled by ATP hydrolysis. ATP hydrolysis on F-actin is known to be at the origin of treadmilling. Here, by using radiolabeled ATP covalently bound to Arp2/3, we show that ATP is hydrolyzed on Arp2, not on Arp3, after a delay following filament branching. Hydrolysis of ATP on Arp2 promotes debranching of filaments and acts as a clock that controls the stability of dendritic actin arrays in lamellipodia. Finally, we propose that hydrolysis of ATP on G-actin in the ternary G-actin-WASP-Arp2/3 complex on branch formation destabilizes the WASP-actin interface and energetically facilitates the detachment step in the branching reaction.

Actin-based motility as a self-organized system: mechanism and reconstitution in vitro.

Site-directed actin polymerisation in response to signalling is responsible for the formation of cell protrusions. These elementary 'actin-based motility processes' are involved in cell locomotion, cell metastasis, organ morphogenesis and microbial pathogenesis. We have reconstituted actin-based propulsive movement of particles of various sizes and geometries (rods, microspheres) in a minimum motility medium containing five pure proteins. The ATP-supported treadmilling of actin filaments, regulated by Actin Depolymerizing Factor (ADF/cofilin), profilin and capping proteins provides the thermodynamic basis for sustained actin-based movement. Local activation of Arp2/3 complex at the surface of the particle promotes autocatalytic barbed end branching of filaments, generating a polarized arborescent array. Barbed end growth of branched filaments against the surface generates a propulsive force and is eventually arrested by capping proteins. Understanding the mechanism of actin-based movement requires elucidation of the biochemical properties and mode of action of Arp2/3 complex in filament branching, in particular the role of ATP binding and hydrolysis in Arp2/3, and a physical analysis of the movement of functionalised particles. Because the functionalisation of the particle by an activator of Arp2/3 complex (N-WASP or the Listeria protein ActA) and the concentrations of effectors in the medium are controlled, the reconstituted motility assay allows an analysis of the mechanism of force production at the mesoscopic and molecular levels.

Actin-based motility: from molecules to movement.

Extensive progress has been made recently in understanding the mechanism by which cells move and extend protrusions using site-directed polymerization of actin in response to signalling. Insights into the molecular mechanism of production of force and movement by actin polymerization have been provided by a crosstalk between several disciplines, including biochemistry, biomimetic approaches and computational studies. This review focuses on the biochemical properties of the proteins involved in actin-based motility and shows how these properties are used to generate models of force production, how the predictions of different theoretical models are tested using a biochemically controlled reconstituted motility assay and how the changes in motility resulting from changes to the concentrations of components of the assay can help understand diverse aspects of the motile behavior of living cells.

A biomimetic motility assay provides insight into the mechanism of actin-based motility.

Abiomimetic motility assay is used to analyze the mechanism of force production by site-directed polymerization of actin. Polystyrene microspheres, functionalized in a controlled fashion by the N-WASP protein, the ubiquitous activator of Arp2/3 complex, undergo actin-based propulsion in a medium that consists of five pure proteins. We have analyzed the dependence of velocity on N-WASP surface density, on the concentration of capping protein, and on external force. Movement was not slowed down by increasing the diameter of the beads (0.2 to 3 microm) nor by increasing the viscosity of the medium by 10(5)-fold. This important result shows that forces due to actin polymerization are balanced by internal forces due to transient attachment of filament ends at the surface. These forces are greater than the viscous drag. Using Alexa488-labeled Arp2/3, we show that Arp2/3 is incorporated in the actin tail like G-actin by barbed end branching of filaments at the bead surface, not by side branching, and that filaments are more densely branched upon increasing gelsolin concentration. These data support models in which the rates of filament branching and capping control velocity, and autocatalytic branching of filament ends, rather than filament nucleation, occurs at the particle surface.

The effect of stathmin phosphorylation on microtubule assembly depends on tubulin critical concentration.

Stathmin is a phosphorylation-regulated tubulin-binding protein. In vitro and in vivo studies using nonphosphorylatable and pseudophosphorylated mutants of stathmin have questioned the view that stathmin might act only as a tubulin-sequestering factor. Stathmin was proposed to effectively regulate microtubule dynamic instability by increasing the frequency of catastrophe (the transition from steady growth to rapid depolymerization), without interacting with tubulin. We have used a noninvasive method to measure the equilibrium dissociation constants of the T(2)S complexes of tubulin with stathmin, pseudophosphorylated (4E)-stathmin, and diphosphostathmin. At both pH 6.8 and pH 7.4, the relative sequestering efficiency of the different stathmin variants depends on the concentration of free tubulin, i.e. on the dynamic state of microtubules. This control is exerted in a narrow range of tubulin concentration due to the highly cooperative binding of tubulin to stathmin. Changes in pH affect the stability of tubulin-stathmin complexes but do not change stathmin function. The 4E-stathmin mutant mimics inactive phosphorylated stathmin at low tubulin concentration and sequesters tubulin almost as efficiently as stathmin at higher tubulin concentration. We propose that stathmin acts solely by sequestering tubulin, without affecting microtubule dynamics, and that the effect of stathmin phosphorylation on microtubule assembly depends on tubulin critical concentration.