Epithelial and stromal thickness profile and lens decentration in myopic orthokeratology / Perfil de espesor epitelial y estromal y descentrado del cristalino en ortoqueratología miope

Purpose: To study topographic epithelial and total corneal thickness changes in myopic subjects undergoing successful orthokeratology treatment in connection with the objective assessment of contact lens decentration. Methods: A prospective-observational and non-randomized study in 32 Caucasian myopic eyes undergoing Ortho-k for 3 months. Total, epithelial, and stromal thicknesses were studied before and after Ortho-k treatment, using optical coherence tomography with anterior segment application software. Central, paracentral, and mid-peripheral values are taken along 8 semi-meridians. Results: The central average total corneal thickness was 4.72 ± 1.04 μm thinner after Ortho-K. The paracentral corneal thickness showed no significant changes (p = 0.137), while the mid-peripheral corneal thickness was increased by 3.25 ± 1.6 μm associating this increase exclusively to the epithelial plot (p<0.001). When lens centration was assessed, a lens fitting decentration less than 1.0 mm was found for the whole sample, predominantly horizontal-temporal (87.5%) and vertical-inferior (50%) decentring. Corneal topographical analysis revealed a horizontal and vertical epithelial thickness asymmetric change profile with paracentral temporal thinnest values, and mid-peripheral nasal thickest values. Conclusions: The present study found a central corneal thinning induced by Ortho-k lenses in subjects with moderate myopia, only associated with a change in epithelial thickness, as well as mid-peripheral thickening, that seems to be mainly epithelial in origin. The authors also found a tendency of contact lens decentration toward temporal and inferior areas conditioning an asymmetric epithelial redistribution pattern.(AU)

Surface AFM microscopy of unworn and worn samples of silicone hydrogel contact lenses.

PURPOSE: To evaluate the qualitative and quantitative topographic changes in the surface of worn contact lenses (CLs) of different materials using atomic force microscopy (AFM). METHODS: The topography of five different CL materials was evaluated with AFM over a surface of 25 microm(2) according to previously published experimental setup. Average roughness (R(a)) and root mean square (Rms) values were obtained for unworn and worn samples. RESULTS: The R(a) value increased for balafilcon A (11.62-13.68 nm for unworn and worn samples, respectively), lotrafilcon A (3.67-15.01 nm for unworn and worn samples, respectively), lotrafilcon B (4.08-8.42 nm for unworn and worn samples, respectively), galyfilcon A (2.81-14.6 nm for unworn and worn samples, respectively), and comfilcon A (2.87-4.63 nm for unworn and worn samples, respectively). Differences were statistically significant for all lenses except Rms and R(a) for comfilcon A, and R(a) parameter for balafilcon A (p > 0.05). The least relative increase was observed for some balafilcon A samples and for some of these samples the roughness decreased after the lenses had been worn. CONCLUSION: The changes in surface roughness between unworn and worn lenses are different for different silicone-hydrogel materials. Overall all CLs increased the degree of surface roughness after being worn, even for very short periods of time. However, for samples of balafilcon A, roughness increases at a lower extent or even can decrease as compared to unworn samples of the same material due to filling of the macropores.

Dynamic in vitro dehydration patterns of unworn and worn silicone hydrogel contact lenses.

PURPOSE: To evaluate the effect of wear on dynamic in vitro dehydration of silicone hydrogel (Si-Hi) contact lens (CL) using a previously described gravimetric procedure. METHODS: Five different silicone hydrogel (Si-Hi) contact lenses (CL) were evaluated after being worn by patients under daily wear conditions for 15 days to 1 month. Lenses were conditioned and disinfected with a multipurpose solution after each day of wear. Lenses were left to dehydrate in an analytical balance under controlled conditions of temperature and relative humidity and the results compared with data from new lens samples of the same power and material. Several quantitative parameters were obtained and compared between worn and unworn samples. RESULTS: The quantitative parameters derived from the dehydration curves showed statistically significant differences between worn and unworn lenses regarding the initial dehydration rate and ability to maintain their original hydration. Worn lenses showed shorter phase I duration (decreased by 30 to 60% compared to unworn samples), a significantly faster initial dehydration rate (increased by about 1%/minute), and lower water retention index (decreased by 10 to 20%) as derived from the initial cumulative dehydration. All the differences were statistically significant for all lenses (p < 0.05). CONCLUSION: The initial dehydration rates were significantly increased in all CL after wear. This could be of clinical interest because it represents the average initial dehydration rates during the first moments when the lens is left to dehydrate after a blink. This study suggests that even after the lenses had been equilibrated in saline solution for several days, the materials lose their ability to retain water.

Technical note: a comparison of central and peripheral intraocular pressure using rebound tonometry.

PURPOSE: To compare central and peripheral intraocular pressure (IOP) readings obtained with rebound tonometry. METHODS: Intraocular pressure was measured on the right eye of 153 patients (65 males, 88 females), aged from 21 to 85 years (mean +/- S.D., 55.5 +/- 15.2 years) with the ICare rebound tonometer at centre, and 2 mm from the limbus (in the nasal and temporal regions along the 0-180 degrees corneal meridian). RESULTS: Intraocular pressure values obtained with the ICare were 14.9 +/- 2.8; 14.1 +/- 2.5 and 14.5 +/- 2.7 mmHg at centre, nasal and temporal corneal locations, respectively. On average, nasal and temporal IOP readings were 0.75 and 0.37 mmHg lower than the central reading (p < 0.05 and p > 0.05, respectively). A highly significant correlation was found between central and peripheral measurements in nasal (r(2) = 0.905; p < 0.001) and temporal (r(2) = 0.879; p < 0.001) regions along the horizontal meridian. Almost 80% of patients presented nasal IOP values within +/-1 mmHg of the central value. CONCLUSIONS: Intraocular pressure values measured with the ICare rebound tonometer on the nasal corneal region is slightly lower on average and highly correlated with IOP values recorded at corneal centre. Both nasal and temporal readings are in good agreement with central IOP, and could be used to obtain a reliable estimate of rebound IOP in corneas where central readings cannot be taken.

Refractive, biometric and topographic changes among Portuguese university science students: a 3-year longitudinal study.

PURPOSE: The aim of this study was to investigate the changes in refractive, biometric and topographic ocular parameters among university students in Portugal during a 3-year period. METHODS: A 3-year longitudinal study comprised 118 Portuguese university students from the School of Science (34 males and 84 females; mean age 20.6 +/- 2.3 years). Ocular refraction, corneal curvature (CR) and eccentricity, and A-scan biometry were conducted under cycloplegia. The sphero-cylindrical refractive results were converted into vector representations (M, J(0) and J(45)) for statistical analysis. Myopia was defined as M < or = -0.50 D, emmetropia as M > -0.50 D and < +0.50 D and hyperopia as M > or = +0.50 D. RESULTS: At the beginning of the study sphero-cylindrical refraction (M) ranged from -6.75 to +3.00 D, with a mean value of 0.23 +/- 1.46 D [mean +/- standard deviation (S.D.)]. Eighty-three students presented astigmatism with a mean value (+/-S.D.) of -0.52 +/- 0.41 D, and a maximum of -2.25 D. After 3 years the mean refractive change for the M component was -0.29 +/- 0.38 D (p < 0.001) and non-significant changes of 0.02 +/- 0.16 D (p = 0.281) for the J(0) component and 0.01 +/- 0.09 D (p = 0.784) for the J(45) component. Prevalence of myopia increased by 5.1%, while the prevalence of hyperopia decreased by 9.4%. Myopia progression > or =0.5 D was observed in 22% of the population. Axial length, vitreous chamber depth and lens thickness increased significantly while anterior chamber depth and central CR did not change significantly. CONCLUSIONS: This study shows a change in refraction towards myopia accompanied by a vitreous chamber elongation in a Portuguese population comprising science students during the first three years of their university course. Younger students were more likely to show clinically significant myopia progression.

Technical note: Accuracy and repeatability of a new portable ultrasound pachymeter.

PURPOSE: To assess the accuracy and repeatability of central corneal thickness (CCT) measurements taken with a new portable ultrasound (US) pachymeter. METHODS: Central thickness measurements were taken with a portable pachymeter (SP-100 Handy; Tomey, Nagoya, Japan) and a conventional US pachymeter (Nidek UP-1000; Nidek Technologies, Gamagori, Japan) from 57 right corneas of 57 young adults (19 males, 38 females) aged 18-44 years (mean +/- S.D., 22.95 +/- 3.92). Three repeated measures were obtained and then compared to obtain the repeatability of each instrument and the agreement between the pachymeters. The three readings taken with the portable pachymeter were compared against each other in order to evaluate intra-session repeatability and bias of each individual measurement with respect to the mean of three. RESULTS: Mean values of CCT were 537 +/- 35 microm for conventional and 534 +/- 35 microm for the new portable pachymeter. A high agreement was found between the two instruments (mean difference = 2.58 microm; 95% CI 1.41-3.75 microm) with only two eyes presenting differences larger than +/-8.6 microm which represents 95% CI in the Bland-Altman plots which represents 1.6% of the mean CCT. The first reading taken showed the highest agreement with the mean value for the portable pachymeter. CONCLUSIONS: The instrument tested in this study is able to take reliable measurements of corneal thickness even if a single reading is considered. Intra-session repeatability was very high, as was also the agreement between the average of three readings taken with the two US pachymeters.

Age differences in central and peripheral intraocular pressure using a rebound tonometer.

AIM: To evaluate the influence of age on the measurements and relationships among central and peripheral intraocular pressure (IOP) readings taken with a rebound tonometer. METHODS: The IOPs were measured using the ICare rebound tonometer on the right eyes of 217 patients (88 men and 129 women) aged 18-85 years (mean 45.9 (SD 19.8) years), at the centre and at 2 mm from the nasal and temporal limbus along the horizontal meridian. Three age groups were established: young (< or =30 years old; n = 75), middle aged (31-60 years old; n = 77) and old patients (>60 years old; n = 65). RESULTS: A high correlation was found between the central and peripheral IOP readings, with the central readings being higher than the peripheral ones. Higher IOP values for the central location were found in the younger patients. Older patients had significantly lower temporal IOP readings than those for the remaining two groups (p<0.001), whereas no significant differences were found among groups when IOP was measured at the central and nasal locations. A significant decrease was observed in the nasal and temporal IOP readings as the age increased (p = 0.011 and 0.006, respectively). CONCLUSION: Older patients had lower IOP values than the middle-aged and younger patients in the temporal peripheral location. A negative correlation was found between age and IOP by rebound tonometry in the corneal periphery but not in its centre.

Non-contact tonometry synchronized with cardiac rhythm and its relationship with blood pressure.

PURPOSE: The main objectives of this study were to determine the differences between non-synchronized intraocular pressure (IOP_N) and intraocular pressure readings synchronized with cardiac pulse and try to determine if these parameters are related to blood pressure values. METHODS: One hundred and sixty-five right eyes from 165 volunteers (107 females, 58 males) aged from 19 to 73 years (mean +/- S.D., 29.93 +/- 11.17) were examined with the Nidek NT-4000, a new non-contact tonometer that allows the measurement of IOP synchronized with the cardiac rhythm. IOP measurements in the four different modes of synchronization were taken in a randomized order. Three measures of each parameter were taken and then averaged. The blood pressure was determined three times with a portable manometer and mean values of systolic and diastolic pressure and the pulse rate were computed. Mean arterial pressure (MAP) was determined as being 1/3 of systolic plus 2/3 of diastolic blood pressure. RESULTS: The mean +/- S.D. values for the standard intraocular pressure (IOP_N: 14.76 +/- 2.86), intraocular pressure in the systolic instant or peak (IOP_P: 14.99 +/- 2.85), intraocular pressure in the middle instant between heartbeats or middle (IOP_M: 14.68 +/- 2.76), and intraocular pressure in the diastolic instant or bottom (IOP_B: 13.86 +/- 2.61) were obtained. The IOP_P was higher than the remaining values. A significant difference in mean IOP existed between IOP_B and the remaining modes of measuring (p < 0.05). Differences were statistically significant for all pair comparisons involving IOP_B. Arterial blood pressure values were systolic 125.5 +/- 14.22, diastolic 77.7 +/- 8.38 and MAP 93.64 +/- 9.44 mmHg. The pulse rate was 77.3 +/- 12.6 beats per minute. Except for the MAP (p = 0.025) there was no significant correlation between different IOP values and systolic or diastolic blood pressure, or pulse rate. CONCLUSIONS: NT-4000 is able to differentiate IOP values when synchronized with the cardiac rhythm and those differences are expected to be within a range of +/-2.5 to +/- 3.0 mmHg. IOP_B seems to be the parameter whose value differs from the non-synchronized and the remaining synchronized parameters in a significant way. Other than a weak association with MAP, no significant correlation between IOP and BP was found. The measurements of IOP readings for the three modes are consistent with timings during the cardiac cycle and IOP pulse cycle.

The influence of cycloplegia in objective refraction.

The purpose of this study was to compare refractions measured with an autorefractor and by retinoscopy with and without cycloplegia. The objective refractions were performed in 199 right eyes from 199 healthy young adults with a mean age of 21.6 +/- 2.66 years. The measurements were performed first without cycloplegia and repeated 30 min later with cycloplegia. Data were analysed using Fourier decomposition of the power profile. More negative values of component M and J(0) were given by non-cycloplegic autorefraction compared with cycloplegic autorefraction (p < 0.0001). However more positive values for the J(45) vector were given by non-cycloplegic autorefraction, although this difference was not statistically significant (p = 0.233). By retinoscopy, more negative values of component M were obtained with non-cycloplegic retinoscopy (p < 0.0001); for the cylindrical vectors J(0) and J(45) the retinoscopy without cycloplegia yields more negative values (p = 0.234; p = 0.112, respectively). Accepting that differences between cycloplegic and non-cycloplegic retinoscopy are only due to the accommodative response, the present results confirm that when performed by an experienced clinician, retinoscopy is a more reliable method to obtain the objective starting point for refraction under non-cycloplegic conditions.

[Corneal asphericity in a young adult population. Clinical implications]. / Asfericidad corneal en una población de adultos jóvenes. Implicaciones clínicas.

PURPOSE: To determine the relevance of the different ocular optical components in the refractive state of young adults, paying special attention to the corneal topography represented by the asphericity value. SUBJECTS AND METHODS: Corneal topographies and ultrasonic biometries were obtained from 109 university students with different refractive errors (spherical equivalent range: +3.25 D to -11.00 D). A regression study was performed in order to establish the relationships between corneal asphericity and refractive error, as well as other ocular optical components related to the emmetropization mechanism of the eye. RESULTS: The mean asphericity values were -0.23 (SD 0.08, range: -0.42 to -0.03). All the values correspond to the mathematical description of the prolate ellipse, most commonly accepted for the normal human cornea. The statistical correlation between asphericity and equivalent refractive error was not significant, but a significant correlation was found for the asphericity with respect to the radius of curvature, vitreous chamber depth and axial length. CONCLUSIONS: 1) The asphericity values support the generalised morphology of the prolate cornea as the standard. The influence of this configuration on the contact lens fit, refractive surgery or the visual performance of the eye are discussed. 2) Results suggest that, although a relationship between axial length and corneal topography actually exists, it is not likely that the latter has implications for the emmetropization mechanisms which determine the refractive state of the adult eye.

A comparison of the ARK-700A autokeratometer and Medmont E300 corneal topographer when measuring peripheral corneal curvature.

PURPOSE: The purpose of this study was to evaluate if corneal topogometry measurements as taken with the ARK-700A autokeratometer are comparable with those measured by the Medmont E300 videokeratoscope at corresponding locations. METHODS: Central and peripheral radius and eccentricity were measured in 122 right eyes of young normal subjects using autokeratometry and videokeratoscopy, obtained in a random order. RESULTS: Curvature measurements obtained with the ARK700A and Medmont E300 correlated well for the central cornea. Larger differences were observed between peripheral autokeratometry readings and the empirically determined corresponding locations with the videokeratoscope. Correlations between the instruments are inconsistent, resulting in unacceptable confidence intervals. Corneal eccentricity was significantly different between the instruments for the vertical (t = 2.4; p = 0.018) and for the horizontal meridians. In the first case, the difference between the averaged values was not clinically significant, but in the horizontal meridian the AK significantly overestimated eccentricity values (t = -11.5; p < 0.001) with differences which were clinically significant. CONCLUSIONS: Central corneal curvature data obtained by ARK700A and Medmont E300 can be interchanged but the same is not true of peripheral determinations of corneal shape. ARK700A probably measures peripheral corneal shape within an elliptical region between 5 and 7 mm in diameter, with the major axis in the vertical meridian.

[Changes in axial length/corneal radius ratio (AL/CR) according to refractive state of the eye. Relationship with ocular components]. / Variación de la ratio longitud axial/radio corneal (LA/RC) con el estado refractivo ocular. Relación con los componentes oculares.

PURPOSE: Determination of the role of the axial length/corneal radius ratio (AL/CR) in the refractive state and investigation of its relationship with the ocular optical components: AL, CR, anterior chamber depth (ACD), crystalline lens thickness (CT) and vitreous chamber depth (VCD). METHODS: The RE (right eye) of 193 University students 22.27 (SD 3.24) years, with different refractive errors (spherical equivalent range: +3.00 D to -11.00 D), being divided into: emmetropes, hyperopes and myopes (low, moderate and high). The ACE, the CT, the VCD and the AL were measured by ultrasonography (unidimensional echography); and the mean CR by videokeratoscopy. RESULTS: The value of AL/CR obtained was 2.98 (SD 0.69) for emmetropes, 2.89 (SD 0.87) for hyperopes, 3.01 (SD 0.07) in low myopias, 3.10 (SD 0.11) in moderate myopias and 3.23 (SD 0.12) in high myopias. The AL/CR ratio showed a higher correlation with the refractive error. Besides, all the refractive groups were observed to have lower CE values as the AL/CR increased. This tendency is statistically significant in hyperopes, emmetropes and low myopes; and is not in moderate and high myopias. All the study groups could be observed to have a positive and statistically significant correlation between AL/CR and ACD. CONCLUSION: The ratio AL/CR is the most important parameter and the best predictor of the refractive state of the human eye. It provides important information on how best to determine the degree of emmetropization given by the crystalline, decreasing its power and the ACD in concordance with the LA. A value for the ratio AL/CR above 3.00 could be considered as a risk factor for the development of myopia in emmetropic eyes.

Accuracy and precision of EyeSys and Orbscan systems on calibrated spherical test surfaces.

BACKGROUND: It is important to know how well the surface topography can be measured with current devices for corneal topographic analysis. There are several applications that need an accurate and precise method to measure corneal shape and variations, such as the effect of contact lens wear and the different refractive surgery techniques. PURPOSE: The aim of this study is to compare the accuracy and reproducibility of the measurement of the central curvature on calibrated steel balls using the EyeSys videokeratoscope and the Orbscan corneal topography system. METHODS: The videokeratoscope (EyeSys Corneal Analysis System 2000, version 3.1) and the Orbscan corneal topography system (Orbscan II version 3.0) were used by four trained investigators to measure a series of five uniform and calibrated test surfaces with known radius of curvature ranging from 6.13 to 9.00 mm. RESULT: No statistically significant difference was found between the videokeratoscope and Orbscan systems in relation to accuracy or precision. The 95% confidence limits showed a close agreement between both instruments. The mean bias was less than +/-0.05 mm for both devices. The precision of the instruments was found to be similar. CONCLUSION: The EyeSys seems to measure more accurately, but the accuracy of the Orbscan was also acceptable, suggesting that both instruments are accurate and precise enough for research and clinical purposes. However, further studies of accuracy and repeatability of topographical measurements on human eyes generated by different topographers are necessary.

Clinical performance of non-contact tonometry by Reichert AT550 in glaucomatous patients.

Measuring intraocular pressure (IOP) by non-contact tonometry (NCT) has been demonstrated to be a valid and reliable technique to be used in primary eye care; it is easier to use, it does not transmit infectious diseases, and it is not necessary to use anaesthetic or staining eye drops. Recently, a new NCT device has showed an excellent level of agreement with Goldmann tonometry, but there are no records of its performance in glaucomatous eyes. To rectify this, IOP was measured in twenty-two patients (44 eyes) receiving medical treatment to control elevated IOP, with AT550 and Goldmann tonometry. Mean values of IOP were 18.98 +/- 2.77 and 19.08 +/- 3.02 mmHg using Goldmann and AT550, respectively. Plots of differences against means displayed good agreement (mean difference +/- limits of agreement, -0.09 +/- 3.30); this value was not significantly different from zero (t-test for dependent samples, p = 0.709). In conclusion, IOP values as measured with the AT550 NCT are clinically comparable with those obtained with Goldmann tonometry in glaucomatous patients. This validates this NCT not only for screening of IOP but to follow-up glaucomatous patients with a rapid, non-invasive method.

Changes in corneal structure with continuous wear of high-Dk soft contact lenses: a pilot study.

PURPOSE: Despite numerous studies that have considered the effects of extended wear of high-Dk soft contact lenses on ocular physiology, little attention has been paid to the impact of such lenses on central or peripheral corneal thickness and curvature. The present study aims to report the time course of changes in corneal thickness and curvature that accompanies the 30-night continuous wear of new silicone hydrogel soft contact lenses in a neophyte population in a longitudinal study. METHODS: Six subjects wore high-Dk lotrafilcon (Dk = 140) on a 30-night replacement schedule for 12 months. Only measurements from the right eye were considered for analysis. Topographical measurements of corneal thickness and curvature were taken. The same parameters were monitored for an additional period of 3 months after lens removal. RESULTS: An almost homogenous increase in corneal radius of curvature was detected for all the locations studied, being statistically significant for the 4-mm cord diameter area. This effect was associated with a progressive thinning effect for the central cornea, whereas midperipheral and peripheral areas did not display such a thinning effect during continuous wear. These effects were still evident for the central cornea 3 months after contact lens wear discontinuation. CONCLUSIONS: Continuous wear of high-Dk silicone hydrogel contact lenses is associated with clinically appreciable changes in topographical corneal curvature, whereas only a reduction in corneal thickness is appreciated in the central area. This effect seems to be a result of mechanical pressure induced by these hybrid hyperpermeable materials, characterized by a higher modulus of elasticity. The small sample size compromises the conclusions addressed from this study, and further work will be necessary to confirm the present results.

Clinical performance of the Reichert AT550: a new non-contact tonometer.

The aim of the present study was to assess the level of accuracy for measurements of intra-ocular pressure (IOP) obtained with a new non-contact tonometer (NCT) the Reichert AT550. Measurements were compared against those obtained with the Reichert Xpert Plus, Goldmann applanation tonometer and Perkins tonometer. Thirty-five university students were assessed with the four tonometers in a randomised order, with non-contact tonometry performed first. Each of the four measurement devices had its own trained clinical observer. Plots of differences of IOP as a function of the mean for each pair of instruments were obtained. No statistically significant differences were found when comparing the AT550 NCT with contact applanation tonometry (AT) (p> 0.05), displaying the closest level of agreement (as represented by the lowest mean difference and the narrowest confidence interval) with the Goldmann tonometer (limits of agreement, 0.12+/-2.17). In conclusion, readings of IOP with the AT550 NCT are clinically comparable with those obtained with Goldmann tonometry in a population with IOP within the normal range.

Rigid gas permeable contact lens and corneal topography.

We investigated the effect of high Dk daily wear rigid gas permeable contact lenses on corneal topography. Eight young myopic subjects wore hard contact lenses for 21 days. Corneal topography was monitored using the EyeSys system. It was measured every day during the next 21 days after the fitting. We recorded the corneal radius of curvature at 16 peripheral points approximately 1, 2, 3 and 4 mm along the four principal meridians (nasal, superior, inferior and temporal). Our study showed that daily wear RGP Forum 210 does not produce significant alterations of the corneal curvature as a function of time.

Measurement of corneal thickness by videopachymetry: preliminary results.

Corneal thickness measurements find applications in areas such as diagnosis and management of corneal disorders and corneal surgery. We present a technique for the measurement of corneal thickness using a CCD camera mounted on a slit-lamp biomicroscope and common image processing software. Thickness measurements were performed on three RGP contact lenses of known thickness with an average error of 5 microm, SD of 8 microm. Measurements of a living cornea yielded a thickness of 505 microm and a SD of 8 microm for 10 consecutive measurements; this is an acceptable value.

[Topographical pachymetry and pachymetric topography in circumscribed posterior keratoconus]. / Paquimetría topográfica y topografía paquimétrica en el queratocono posterior circunscrito.

CASE REPORT: A 29 year-old male patient presenting circumscribed posterior keratoconus in the left eye was studied. After ocular examination, corneal morphometry was studied by a computer-assisted topographic analysis and topographical ultrasonic pachymetry. Corneal thickness profile was represented by a colour-coded map from twenty-five measured points (pachymetric topography). DISCUSSION: Slit lamp biomicroscopy shows a paracentral-localized area of moderate corneal thinning with a nasal-superior concavity on posterior corneal surface. Topographical pachometry and pachometric topography allow to make precise corneal thinning evaluation and offer useful diagnostic data for this rare corneal dystrophy.

Further information on the knowledge of topographical corneal thickness.

Central and peripheral corneal thickness has been used increasingly to obtain information about physiologic and clinical conditions of the cornea. In this study, a new method based on ultrasonic pachometry for topographical corneal thickness measurement is described. Results suggest that the technique is reliable for clinical determination of global corneal thickness. Measurements taken by one observer on different sessions (intersession variation) and measurements taken by different observers (interobserver variation) are not significant different (p = 0.586 and 0.273, respectively). This new ultrasound topographical pachometric method can be considered a useful tool for determination of topographical corneal thickness. It has implications for the use of topographical ultrasonic pachometry in contact lenses research, refractive surgery, and management of different pathologic conditions.