Characterization of Rotational Stacking Layers in Large-Area MoSe2 Film Grown by Molecular Beam Epitaxy and Interaction with Photon.

Transition metal dichalcogenides (TMDCs) are promising next-generation materials for optoelectronic devices because, at subnanometer thicknesses, they have a transparency, flexibility, and band gap in the near-infrared to visible light range. In this study, we examined continuous, large-area MoSe2 film, grown by molecular beam epitaxy on an amorphous SiO2/Si substrate, which facilitated direct device fabrication without exfoliation. Spectroscopic measurements were implemented to verify the formation of a homogeneous MoSe2 film by performing mapping on the micrometer scale and measurements at multiple positions. The crystalline structure of the film showed hexagonal (2H) rotationally stacked layers. The local strain at the grain boundaries was mapped using a geometric phase analysis, which showed a higher strain for a 30° twist angle compared to a 13° angle. Furthermore, the photon-matter interaction for the rotational stacking structures was investigated as a function of the number of layers using spectroscopic ellipsometry. The optical band gap for the grown MoSe2 was in the near-infrared range, 1.24-1.39 eV. As the film thickness increased, the band gap energy decreased. The atomically controlled thin MoSe2 showed promise for application to nanoelectronics, photodetectors, light emitting diodes, and valleytronics.

Evolution of crystal structures in GeTe during phase transition.

We investigated changes in the crystal structure of GeTe during its phase transition. Using density functional theory (DFT) calculations, four possible crystal structures were identified: R3m, P1, Cm, and Fm3m. Among these, P1 and Cm were examined here for the first time. By calculating the internal energy of the crystal volume change, we verified that P1, R3m, and Cm can coexist in crystalline GeTe. The X-ray diffraction spectra of annealed and laser-irradiated GeTe films revealed coexisting P1 or R3m and Cm. In addition, we confirmed that Cm transforms into P1 or R3m after laser irradiation. The presence of these new structures was revealed in the crystal Raman spectra. Many of the Raman peaks in the crystalized GeTe could be explained by the coexistence of various structures. By calculating the band gaps of these structures, we also found that a structural transformation induces a change in the crystal resistance, owing to differences in the band gaps of individual structures. The generation of new crystal structures suggests a facile phase change and instability during the structural transformation.

Thermal and Electrical Conduction of Single-crystal Bi2Te3 Nanostructures grown using a one step process.

Single-crystal Bi2Te3 nanowires (NWs) and nanoribbons (NRs) were synthesized by a vapor-liquid-solid (VLS) method from Bi2Te3 powder. To investigate the thermal properties of the Bi2Te3 nanostructure, a nondestructive technique based on temperature dependent Raman mapping was carried out. The Raman peaks were red shifted with increasing temperature. In addition, the fraction of the laser power absorbed inside the Bi2Te3 nanostructures was estimated by optical simulation and used to calculate the thermal conductivity value (κ). The thermal conductivity value obtained for the Bi2Te3 NW and NR was 1.47 Wm(-1)K(-1) and 1.81 Wm(-1)K(-1) at 300 K, respectively. The electrical conductivity of the Bi2Te3 nanostructure was also measured. In particular, an excellent electrical conductivity value of 1.22 * 10(3 )Ω(-1) cm(-1) was obtained for the Bi2Te3 NW at 300 K. This result can be attributed to topological insulator surface states. As a result of our study, the figure of merit (ZT) for the Bi2Te3 NW and NR can be significantly improved.

Effect of the Thermal Conductivity on Resistive Switching in GeTe and Ge2Sb2Te5 Nanowires.

The thermal conduction characteristics of GeTe and Ge2Sb2Te5(GST) nanowires were investigated using an optical method to determine the local temperature by Raman spectroscopy. Since the localization of surface charge in a single-crystalline nanostructure can enhance charge-phonon scattering, the thermal conductivity value (κ) of single crystalline GeTe and GST nanowires was decreased significantly to 1.44 Wm(-1) K(-1) for GeTe and 1.13 Wm(-1) K(-1) for GST, compared to reported values for polycrystalline structures. The SET-to-RESET state in single-crystalline GeTe and GST nanowires are characteristic of a memory device. Unlike previous reports using GeTe and GST nanowires, the SET-to-RESET characteristics showed a bipolar switching shape and no unipolar switching. In addition, after multiple cycles of operation, a significant change in morphology and composition was observed without any structural phase transition, indicating that atoms migrate toward the cathode or anode, depending on their electronegativities. This change caused by a field effect indicates that the structural phase transition does not occur in the case of GeTe and GST nanowires with a significantly lowered thermal conductivity and stable crystalline structure. Finally, the formation of voids and hillocks as the result of the electromigration critically degrades device reliability.