Effect of electron beam irradiation on the pine wood nematode, Bursaphelenchus xylophilus.

PURPOSE: Reproduction inhibition of the pine wood nematode (PWN) by electron beam (e-beam) irradiation both in vitro and in vivo was tested to determine if ionizing radiation could control the PWN by reducing survival and preventing reproduction, thus reducing the risk of pine wilt disease (PWD) spread. MATERIALS AND METHODS: E-beam (10 MeV) irradiation treatment at different doses (0-4 kGy) was applied to PWNs in a Petri dish. Treatment of pine wood logs infested with PWNs was performed at 10 kGy. Mortality was determined by comparing the survival rates before and after irradiation treatment. DNA damage by e-beam irradiation (0-10 kGy) in the PWN was determined using the comet assay. RESULTS: E-beam irradiation increased mortality and suppressed reproduction with increasing doses. The lethal dose (LD) values (kGy) were estimated as follows: LD50 = 2.32, LD90 = 5.03, and LD99 = 9.48. E-beam irradiation of pine wood logs significantly suppressed PWN reproduction. Comets of e-beam-irradiated cells showed an increased tail DNA level and moment with an increasing dose. CONCLUSION: This study suggests that e-beam irradiation could be used as an alternative method for the management of pine wood logs infested with PWNs.

Structural Interplays in the Flexible N-Terminus and Scaffolding Domain of Human Membrane Protein Caveolin 3.

Caveolins are critical for the formation of caveolae, which are small invaginations of the plasma membrane involved in a variety of biological processes. Caveolin 3 (Cav3), one of three caveolin isoforms, is an integral membrane protein mainly expressed in muscle tissues. Although various human diseases associated with Cav3 have been reported, structural characterization of Cav3 in the membrane has not been investigated in enough depth to understand the structure-function relationship. Here, using solution NMR, we characterized membrane association, structural communications, and molecular dynamics of the monomeric Cav3 in detergent micelle environment, particularly focused on the whole N-terminal part that is composed of the flexible N-terminus and the scaffolding domain. The results revealed a complicated structural interplay of the individual segments composing the whole N-terminal part, including the pH-dependent helical region, signature motif-like region, signature motif, and scaffolding domain. Collectively, the present study provides novel structural insights into the whole N-terminal part of Cav3 that plays important biological roles in cellular processes and diseases. In particular, given that several disease-related mutations are located at the whole N-terminal part of Cav3, the sophisticated communications in the whole N-terminal segments are likely to have relevance to the molecular basis of Cav3-related disease.

Inhibitory effect of gamma irradiation and its application for control of postharvest green mold decay of Satsuma mandarins.

Gamma irradiation has been shown to be effective for the control of postharvest fungi in vitro, but little is known regarding antifungal action, responses to gamma irradiation, and its application to fresh produce. Gamma irradiation was evaluated for its in vitro and in vivo antifungal activity against Penicillium digitatum on Satsuma mandarin fruits. Green mold was inhibited in a dose-dependent manner. Gamma irradiation showed a complete inhibition of spore germination, germ tube elongation, and mycelial growth of P. digitatum, particularly at 1.0kGy. To further investigate the mechanisms by which gamma irradiation inhibits fungal growth, the membrane integrity and cellular leakage of conidia were tested, indicating that gamma irradiation results in the loss of plasma membrane integrity, causing the release of intracellular contents such as soluble proteins. In vivo assays demonstrated that established doses can completely inhibit the growth of fungal pathogens, but such high doses cause severe fruit damage. Thus, to eliminate the negative impact on fruit quality, gamma irradiation at lower doses was evaluated for inhibition of P. digitatum, in combination with a chlorine donor, sodium dichloro-s-triazinetrione (NaDCC). Interestingly, only a combined treatment with 0.4kGy of gamma irradiation and 10ppm of NaDCC exhibited significant synergistic antifungal activity against green mold decay. The mechanisms by which the combined treatment decreased the green mold decay of mandarin fruits can be directly associated with the disruption of cell membrane of the fungal pathogen, which resulted in a loss of cytoplasmic material from the hyphae. These findings suggest that a synergistic effect of combining treatment with gamma irradiation with NaDCC has potential as an antifungal approach to reduce the severity of green mold in mandarin fruits.

Control of Postharvest Bacterial Soft Rot by Gamma Irradiation and its Potential Modes of Action.

Gamma irradiation was evaluated for its in vitro and in vivo antibacterial activity against a postharvest bacterial pathogen, Erwinia carotovora subsp. carotovora (Ecc). Gamma irradiation in a bacteria cell suspension resulted in a dramatic reduction of the viable counts as well as an increase in the amounts of DNA and protein released from the cells. Gamma irradiation showed complete inactivation of Ecc, especially at a dose of 0.6 kGy. In addition, scanning electron microscopy of irradiated cells revealed severe damage on the surface of most bacterial cells. Along with the morphological changes of cells by gamma irradiation, it also affected the membrane integrity in a dose-dependent manner. The mechanisms by which the gamma irradiation decreased the bacterial soft rot can be directly associated with the disruption of the cell membrane of the bacterial pathogen, along with DNA fragmentation, results in dose-dependent cell inactivation. These findings suggest that gamma irradiation has potential as an antibacterial approach to reduce the severity of the soft rot of paprika.

Effects of Ionizing Radiation on Postharvest Fungal Pathogens.

Postharvest diseases cause losses in a wide variety of crops around the world. Irradiation, a useful nonchemical approach, has been used as an alternative treatment for fungicide to control plant fungal pathogens. For a preliminary study, ionizing radiations (gamma, X-ray, or e-beam irradiation) were evaluated for their antifungal activity against Botrytis cinerea, Penicillium expansum, and Rhizopus stolonifer through mycelial growth, spore germination, and morphological analysis under various conditions. Different fungi exhibited different radiosensitivity. The inhibition of fungal growth showed in a dose-dependent manner. Three fungal pathogens have greater sensitivity to the e-beam treatment compared to gamma or X-ray irradiations. The inactivation of individual fungal-viability to different irradiations can be considered between 3-4 kGy for B. cinerea and 1-2 kGy for P. expansum and R. stolonifer based on the radiosensitive and radio-resistant species, respectively. These preliminary data will provide critical information to control postharvest diseases through radiation.

A randomized, prospective, two-center comparison of sirolimus-eluting stent and zotarolimus-eluting stent in acute ST-elevation myocardial infarction: the SEZE trial.

BACKGROUND: The zotarolimus-eluting stent has shown larger in-stent late lumen loss compared to sirolimus-eluting stents in previous studies. However, this has not been thoroughly evaluated in ST elevation myocardial infarction. METHODS: This was a prospective, randomized, controlled trial evaluating angiographic outcomes in patients presenting with ST elevation myocardial infarction, treated with zotarolimus-eluting stents or sirolimus-eluting stents. From March 2007 to February 2009, 122 patients were randomized to zotarolimus-eluting stents or sirolimus-eluting stents in a 1:1 fashion. The primary endpoint was 9-month in-stent late lumen loss confirmed by coronary angiography, and secondary endpoints were percent diameter stenosis, binary restenosis rate, major adverse cardiac events (a composite of cardiac death, non-fatal myocardial infarction, and target vessel revascularization), and late-acquired incomplete stent apposition. RESULTS: Angiographic in-stent late lumen loss was significantly higher in the zotarolimus-eluting stent group compared to the sirolimus-eluting stent group ((0.49 ± 0.65) mm vs. (0.10 ± 0.46) mm, P = 0.001). Percent diameter stenosis at 9-month follow-up was also larger in the zotarolimus-eluting stent group ((30.0 ± 17.9)% vs. (17.6 ± 14.0)%, P < 0.001). In-segment analysis showed similar findings. There were no significant differences in binary restenosis rate, major adverse cardiac events, and late-acquired incomplete stent apposition. CONCLUSIONS: Compared to sirolimus-eluting stents, the zotarolimus-eluting stent is associated with significantly higher in-stent late lumen loss at 9-month angiographic follow-up in the treatment of ST elevation myocardial infarction. Although there was no significant difference in 1-year clinical outcomes, the clinical implication of increased late lumen loss should be further studied.

Antimicrobial action effect and stability of nanosized silica hybrid Ag complex.

Nanosized silica hybrid silver complex (NSS) showing strong antifungal activity, in which nanosilver (nano-Ag) was bound to silica (SiO2) molecules, was synthesized via gamma-irradiation at room temperature. NSS was characterized via field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDXS), ultraviolet-visible (UV-Vis) spectrophotometer, and thermogravimetric analysis (TGA). The FESEM images and EDXS data showed that well-dispersed 3-to-10-nm Ag nanoparticles (core part) were loaded onto the outer parts of 5-to-20 nm SiO2 nanoparticles. The antifungal efficiency of NSS was evaluated against Rhizoctonia solani, Botrytis cinerea, and Colletotrichum gloeosporioides. In the case of Rhizoctonia solani, the growth rate was decreased typically by more than 90% at a 6 microg/ml concentration of NSS as a medium additive. The antifungal-action mechanism was investigated via transmission electron microscopy (TEM) analysis of the NSS treatment against Botrytis cinerea. The stability and antimicrobial activity of NSS were determined, using the plate culture method, from several water samples containing NSS after 7-day NSS treatment. Moreover, the NSS solution maintained stable antifungal activity for at least 24 mos. These results suggest that NSS, an environment-friendly nanomaterial, can be used as strongly effective growth inhibitor of various microorganisms, making it applicable to diverse antimicrobial-control systems.

A means to estimate thermal and kinetic parameters of coal dust layer from hot surface ignition tests.

A method to estimate thermal and kinetic parameters of Pittsburgh seam coal subject to thermal runaway is presented using the standard ASTM E 2021 hot surface ignition test apparatus. Parameters include thermal conductivity (k), activation energy (E), coupled term (QA) of heat of reaction (Q) and pre-exponential factor (A) which are required, but rarely known input values to determine the thermal runaway propensity of a dust material. Four different dust layer thicknesses: 6.4, 12.7, 19.1 and 25.4mm, are tested, and among them, a single steady state dust layer temperature profile of 12.7 mm thick dust layer is used to estimate k, E and QA. k is calculated by equating heat flux from the hot surface layer and heat loss rate on the boundary assuming negligible heat generation in the coal dust layer at a low hot surface temperature. E and QA are calculated by optimizing a numerically estimated steady state dust layer temperature distribution to the experimentally obtained temperature profile of a 12.7 mm thick dust layer. Two unknowns, E and QA, are reduced to one from the correlation of E and QA obtained at criticality of thermal runaway. The estimated k is 0.1 W/mK matching the previously reported value. E ranges from 61.7 to 83.1 kJ/mol, and the corresponding QA ranges from 1.7 x 10(9) to 4.8 x 10(11)J/kg s. The mean values of E (72.4 kJ/mol) and QA (2.8 x 10(10)J/kg s) are used to predict the critical hot surface temperatures for other thicknesses, and good agreement is observed between measured and experimental values. Also, the estimated E and QA ranges match the corresponding ranges calculated from the multiple tests method and values reported in previous research.