Protocol to operate a large-scale CO2 hydrogenation process for formic acid production.

Formic acid is a viable product of CO2 utilization. Here, we present a protocol for designing and operating a pilot-scale formic acid production plant with a 10 kg/day capacity produced via CO2 hydrogenation. We describe the essential process specifications required for successful operation, including prevention of corrosion and formic acid decomposition. We then detail procedures for steady-state operation of the individual units. This protocol provides the necessary information for further scale-up and commercialization of the CO2 hydrogenation process. For complete details on the use and execution of this protocol, please refer to Kim et al.1.

Toward economical application of carbon capture and utilization technology with near-zero carbon emission.

Carbon capture and utilization technology has been studied for its practical ability to reduce CO2 emissions and enable economical chemical production. The main challenge of this technology is that a large amount of thermal energy must be provided to supply high-purity CO2 and purify the product. Herein, we propose a new concept called reaction swing absorption, which produces synthesis gas (syngas) with net-zero CO2 emission through direct electrochemical CO2 reduction in a newly proposed amine solution, triethylamine. Experimental investigations show high CO2 absorption rates (>84%) of triethylamine from low CO2 concentrated flue gas. In addition, the CO Faradaic efficiency in a triethylamine supplied membrane electrode assembly electrolyzer is approximately 30% (@-200 mA cm-2), twice higher than those in conventional alkanolamine solvents. Based on the experimental results and rigorous process modeling, we reveal that reaction swing absorption produces high pressure syngas at a reasonable cost with negligible CO2 emissions. This system provides a fundamental solution for the CO2 crossover and low system stability of electrochemical CO2 reduction.

Oxygen nonstoichiometry and thermodynamic quantities of Gd and Cu doped misfit-layered calcium cobaltites.

Hyperstoichiometric (p-type) misfit-layered calcium cobaltites have been studied as components in various high-temperature electrochemical devices. Multiple studies have reported their applications or physical properties, but systematic studies on their defect structures and thermodynamic quantities are still insufficient. In this study, the oxygen nonstoichiometry and the electrical conductivity of Gd-Cu co-doped misfit cobalt oxide were measured as functions of temperature and oxygen partial pressure, along with thermodynamic quantities. The behavior of oxygen nonstoichiometry could not be explained by a defect structure assuming the ideal solution, as it showed a positive deviation in Raoult's law. The redesigned nonideal proposed defect structure, considering that the deviation originated from the high concentration of degenerate holes, could describe the oxygen nonstoichiometry precisely; and in this process, the values of , , Nv, , γh, and were quantitatively extracted. These values were compared with those obtained for the undoped system. The total electrical conductivity was measured using a dense specimen obtained via spark plasma sintering, and the anisotropic nature of the material was confirmed.

Degradation Mechanisms of Solid Oxide Fuel Cells under Various Thermal Cycling Conditions.

A critical issue to tackle before successful commercialization of solid oxide fuel cells (SOFCs) can be achieved is the long-term thermal stability required for SOFCs to operate reliably without significant performance degradation despite enduring thermal cycling. In this work, the impact of thermal cycling on the durability of NiO-yttria-stabilized zirconia-based anode-supported cells is studied using three different heating/cooling rates (1, 2, and 5 °C min-1) as the temperature fluctuated between 400 and 700 °C. Our experiments simulate time periods when power from SOFCs is not required (e.g., as might occur at night or during an emergency shutdown). The decay ratios of the cell voltages are 8.8% (82 µV h-1) and 19.1% (187 µV h-1) after thermal cycling testing at heating/cooling rates of 1 and 5 °C min-1, respectively, over a period of 1000 h. The results indicate SOFCs that undergo rapid thermal cycling experience much greater performance degradation than cells that experience slow heating/cooling rates. The changes in total resistance for thermally cycled cells are determined by measuring the Rpol of the electrodes (whereas the ohmic resistances of the cells remain unchanged from their initial value), signifying that electrode deterioration is the main degradation mechanism for SOFCs under thermal cycling. In particular, fast thermal cycling leads to severe degradation in the anode part of SOFCs with substantial agglomeration and depletion of Ni particles seen in our characterizations with field emission-scanning electron microscopy and electron probe microanalysis. In addition, the mean particle size in the cathode after thermal cycling testing increases from 0.104 to 0.201 µm for the 5 °C min-1 cell. Further, the presence of Sr-enriched regions is more significant in the La0.6Sr0.4Co0.2Fe0.8O3-δ cathode after fast thermally cycled SOFCs.

Utilizing the Intrinsic Thermal Instability of Swedenborgite Structured YBaCo4O7+δ as an Opportunity for Material Engineering in Lithium-Ion Batteries by Er and Ga Co-Doping Processes.

We firstly introduce Er and Ga co-doped swedenborgite-structured YBaCo4O7+δ (YBC) as a cathode-active material in lithium-ion batteries (LIBs), aiming at converting the phase instability of YBC at high temperatures into a strategic way of enhancing the structural stability of layered cathode-active materials. Our recent publication reported that Y0.8Er0.2BaCo3.2Ga0.8O7+δ (YEBCG) showed excellent phase stability compared to YBC in a fuel cell operating condition. By contrast, the feasibility of the LiCoO2 (LCO) phase, which is derived from swedenborgite-structured YBC-based materials, as a LIB cathode-active material is investigated and the effects of co-doping with the Er and Ga ions on the structural and electrochemical properties of Li-intercalated YBC are systemically studied. The intrinsic swedenborgite structure of YBC-based materials with tetrahedrally coordinated Co2+/Co3+ are partially transformed into octahedrally coordinated Co3+, resulting in the formation of an LCO layered structure with a space group of R-3m that can work as a Li-ion migration path. Li-intercalated YEBCG (Li[YEBCG]) shows effective suppression of structural phase transition during cycling, leading to the enhancement of LIB performance in Coulombic efficiency, capacity retention, and rate capability. The galvanostatic intermittent titration technique, cyclic voltammetry and electrochemical impedance spectroscopy are performed to elucidate the enhanced phase stability of Li[YEBCG].

Three-dimensional assessment of the anterior and inferior loop of the inferior alveolar nerve using computed tomography images in patients with and without mandibular asymmetry.

BACKGROUND: The purpose of this study was to investigate the differences in configuration and dimensions of the anterior loop of the inferior alveolar nerve (ALIAN) in patients with and without mandibular asymmetry. METHOD: Preoperative computed tomography images of patients who had undergone orthognathic surgery from January 2016 to December 2018 at a single institution were analyzed. Subjects were classified into two groups as "Asymmetry group" and "Symmetry group". The distance from the most anterior and most inferior points of the ALIAN (IANant and IANinf) to the vertical and horizontal reference planes were measured (dAnt and dInf). The distance from IANant and IANinf to the mental foramen were also calculated (dAnt_MF and dInf_MF). The length of the mandibular body and symphysis area were measured. All measurements were analyzed using 3D analysis software. RESULTS: There were 57 total eligible subjects. In the Asymmetry group, dAnt and dAnt_MF on the non-deviated side were significantly longer than the deviated side (p < 0.001). dInf_MF on the non-deviated side was also significantly longer than the deviated side (p = 0.001). Mandibular body length was significantly longer on the non-deviated side (p < 0.001). There was no significant difference in length in the symphysis area (p = 0.623). In the Symmetry group, there was no difference between the left and right sides for all variables. CONCLUSION: In asymmetric patients, there is a difference tendency in the ALIAN between the deviated and non-deviated sides. In patients with mandibular asymmetry, this should be considered during surgery in the anterior mandible.

An Efficient and Practical System for the Synthesis of N,N-Dimethylformamide by CO2 Hydrogenation using a Heterogeneous Ru Catalyst: From Batch to Continuous Flow.

In the context of CO2 utilization, a number of CO2 conversion methods have been identified in laboratory-scale research; however, only a very few transformations have been successfully scaled up and implemented industrially. The main bottleneck in realizing industrial application of these CO2 conversions is the lack of industrially viable catalytic systems and the need for practically implementable process developments. In this study, a simple, highly efficient and recyclable ruthenium-grafted bisphosphine-based porous organic polymer (Ru@PP-POP) catalyst has been developed for the hydrogenation of CO2 to N,N-dimethylformamide, which affords a highest ever turnover number of 160 000 and an initial turnover frequency of 29 000 h-1 in a batch process. The catalyst is successfully applied in a trickle-bed reactor and utilized in an industrially feasible continuous-flow process with an excellent durability and productivity of 915 mmol h-1 gRu -1 .

Is There a Difference in Condyle Position Changing Pattern Between Deviated and Non-Deviated Sides After Intraoral Vertical Ramus Osteotomy in Facial Asymmetry?

PURPOSE: The position changing pattern of the condyles after intraoral vertical ramus osteotomy (IVRO) on the deviated and non-deviated sides is not clearly known. This study was conducted to evaluate the changes in condylar position after IVRO in patients with facial asymmetry and to compare the deviated and non-deviated sides using computed tomography imaging. MATERIALS AND METHODS: This retrospective cohort study investigated patients with a diagnosis of mandibular prognathism with facial asymmetry who had undergone bilateral IVRO with Le Fort I osteotomy. Condylar positions were recorded on the non-deviated and deviated sides in the midaxial, midsagittal, and coronal planes at 3 time points using 3-dimensional analysis software: preoperatively (T1), at 6 months postoperatively (T2), and at 12 months postoperatively (T3). Linear and angular changes in condyle position were measured and analyzed between T1, T2, and T3. Reliability and comparative analyses were conducted. RESULTS: Thirty-two patients were involved in this study. At T2, the most superior point of the condyle moved to 1.15 ± 0.24 mm (inferiorly) and 0.88 ± 0.23 mm (anteriorly) on the deviated side (P = .0002 and P = .0005, respectively) and to 0.99 ± 0.25 mm (inferiorly) and 1.08 ± 0.34 mm (anteriorly) on the non-deviated side, showing significant differences (P < .0001 and P = .0007, respectively) compared with T1. The condyle position showed a tendency to recover to its original position by T3. However, there were no statistically significant differences between T2 and T3 (P > .05). Furthermore, there were no statistically significant differences between the deviated and non-deviated sides over the entire follow-up period (P > .05). CONCLUSIONS: The condyles did not completely recover to their preoperative positions until 12 months postoperatively. There was no significant difference between the deviated and non-deviated sides in mandibular prognathism with facial asymmetry.

Three-dimensional computed tomography evaluation of craniofacial characteristics according to lateral deviation of chin.

BACKGROUND: The relationship between the lateral deviation of chin and the upper and middle facial third asymmetry is still controversial. The purpose of this study is to evaluate the correlation of upper and middle facial third asymmetry with lateral deviation of chin using 3-dimensional computed tomography. The study was conducted on patients who underwent orthognathic surgery from January 2016 to August 2017. A total of 40 patients were included in this retrospective study. A spiral scanner was used to obtain the 3-dimensional computed tomography scans. The landmarks were assigned on the reconstructed 3-dimensional images, and their locations were verified on the axial, midsagittal, and coronal slices. The Pearson correlation analysis was performed to evaluate the correlation between chin deviation and difference between the measurements of distances in paired craniofacial structures. Statistical analysis was performed at a significance level of 5%. RESULTS: In mandible, the degree of chin deviation was correlated with the mandibular length and mandibular body length. Mandibular length and mandibular body length are shorter on the deviated-chin side compared to that on the non-deviated side (mandibular length, r = -0.897, p value < 0.001; mandibular body length, r = -0.318, p value = 0.045). In the upper and middle facial thirds, the degree of chin deviation was correlated with the vertical asymmetry of the glenoid fossa and zygonion. Glenoid fossa and zygonion are superior on the deviated-chin side than on the non-deviated side (glenoid fossa, r = 0.317, p value = 0.046; zygonion, r = 0.357, p value = 0.024). CONCLUSION: Lateral deviation of chin is correlated with upper and middle facial third asymmetry as well as lower facial third asymmetry. As a result, treatment planning in patients with chin deviation should involve a careful evaluation of the asymmetry of the upper and middle facial thirds to ensure complete patient satisfaction.

Effect of bisphosphonate on temporomandibular joint in osteopenia-induced rats by botulinum toxin A injection on masticatory muscle: a preliminary study.

BACKGROUND: Botulinum toxin injection on the masticatory muscle induces the osteopenic condition on the ipsilateral condyle. Bisphosphonate suppresses bone resorption and is used to treat osteopenic or osteoporotic condition. This study aimed to evaluate the effect of bisphosphonate administration on prevention of condylar resorption and botulinum toxin A-induced disuse osteopenia in rats. RESULTS: The volume of the condyle and bone volume/tissue volume (BV/TV, %) showed a strong tendency towards statistical significance (p = 0.052 and 0.058). Trabecular thickness (Tb.Th, mm) and trabecular number (Tb.N, 1/mm) were significantly smaller in the Botox group than in the other groups (p < 0.05). The volume of the condyle and BV/TV in the bisphosphonate 100 and bisphosphonate 200 groups showed similar values when compared with the control group. CONCLUSION: Bisphosphonate administration after botulinum toxin A injection in the masticatory muscles appears to prevent condyle resorption and botulinum toxin-induced disuse osteopenia in rats.

Modified difficult index adding extremely difficult for fully impacted mandibular third molar extraction.

OBJECTIVES: The aim of this study was to evaluate the validity of the existing classification and difficulty index of impacted mandibular third molars in clinical situations and propose a more practical classification system. MATERIALS AND METHODS: This study included 204 impacted mandibular third molars in 154 patients; panoramic x-ray images were obtained before tooth extraction. Factors including age, sex, and pattern of impaction were investigated. All impacted third molars were classified and scored for spatial relationship (1-5 points), depth (1-4 points), and ramus relationship (1-3 points). All variables were measured twice by the same observer at a minimum interval of one month. Finally, the difficulty index was defined based on the total points scored as slightly difficult (3-4 points), moderately difficult (5-7 points), very difficult (8-10 points), and extremely difficult (11-12 points). RESULTS: The strength of agreement of the total points scored and difficulty index were 0.855 and 0.746, respectively. Most cases were classified as moderately difficult (73.0%). Although only 13 out of 204 cases (6.4%) were classified as extremely difficult, patients classified as extremely difficult were the oldest (P<0.05). CONCLUSION: For difficulty classification, the authors propose one more difficult category beyond the existing three-step difficulty index: the clinician should consider the patient's age in the difficulty index evaluation.

Subcutaneous emphysema related to dental procedures.

OBJECTIVES: The objective of this study was to analyze 11 cases of subcutaneous emphysema associated with dental procedures from a single hospital and discuss approaches for accurate diagnosis and treatment of the condition. MATERIALS AND METHODS: The medical records of 11 patients who were treated for subcutaneous emphysema related to dental procedures between January 2009 and April 2017 were analyzed retrospectively. Patients with subcutaneous emphysema within the facial area or that spread to the neck and beyond, including the facial region, were assigned to two groups and compared in terms of age, sex, and durations of antibiotic use, hospitalization, and follow-up until improvement. The correlation between location of the origin tooth and range of emphysema spread was analyzed. RESULTS: The average durations of antibiotic use during conservative treatment and follow-up until improvement were 8.55 days (standard deviation [SD], 4.46 days) and 1.82 weeks (SD, 1.19 weeks), respectively. There was no intergroup difference in duration of antibiotic use (P=0.329) or follow-up (P=0.931). Subcutaneous emphysema was more common after dental procedures involving the maxilla or posterior region than after those involving the mandible or anterior region. There was no significant difference in air distribution according to location of the air orifice (maxilla, mandible, or both; P=0.106). CONCLUSION: Upon adequate conservative treatment accompanied by prophylactic antibiotic treatment considering the risk of infection, patients showed signs of improvement within a few days or weeks. There was no significant difference in treatment period between patients with subcutaneous emphysema localized to the facial region and those with subcutaneous emphysema spreading to the neck or beyond. These findings need to be confirmed by analysis of additional cases.

Three-dimensional analysis of the anterior loop of the inferior alveolar nerve in relation to the growth pattern of the mandibular functional subunit.

BACKGROUND: The purpose of the present study was to investigate the differences in the position and shape of the anterior loop of the inferior alveolar nerve (ALIAN) in relation to the growth pattern of the mandibular functional subunit. METHODS: The study was conducted on 56 patients among those who had undergone orthognathic surgery at the Gangnam Severance Hospital between January 2010 and December 2015. Preoperative computerized tomography (CT) images were analyzed using the Simplant OMS software (ver.14.0 Materialise Medical, Leuven, Belgium). The anterior and inferior lengths of ALIAN (dAnt and dInf) and each length of the mandibular functional subunits were measured. The relationship between dAnt, dInf, and the growth pattern of the mandibular subunits was analyzed. RESULTS: The length of the anterior portion of ALIAN (dAnt) reached 3.34 ± 1.59 mm in prognathism and 1.00 ± 0.97 mm in retrognathism. The length of the inferior portion of ALIAN (dInf) reached 6.81 ± 1.33 mm in prognathism and 5.56 ± 1.34 mm in retrognathism. The analysis of Pearson's correlation coefficiency on all samples showed that the lengths of functional subunits were positively correlated with the loop depth. The length of the symphysis area in prognathic patients was positively correlated with the anterior loop depth (p = 0.005). CONCLUSIONS: Both the anterior and inferior length of ALIAN are longer in prognathic patients. Especially, it seems to be associated with the growth of the symphysis area.

Expression of collagenases (matrix metalloproteinase-1, 8, 13) and tissue inhibitor of metalloproteinase-1 of retrodiscal tissue in temporomandibular joint disorder patients.

OBJECTIVES: The aim of this study was to reveal how collagenases (matrix metalloproteinase [MMP]-1, 8, 13) and tissue inhibitor of metalloproteinase 1 (TIMP-1) are expressed in immunohistochemistry of retrodiscal tissue in temporomandibular joint disorder patients. MATERIALS AND METHODS: This study was conducted on 39 patients who underwent discoplasty or discectomy. Immunohistochemical staining was undertaken and expression levels of MMP-1, 8, 13, and TIMP-1 were evaluated. The status of internal derangement of disc, osteoarthritis, and joint effusion were analyzed using magnetic resonance imaging (MRI). Disc status observed during operation was also categorized. RESULTS: The more severe disc derangement was observed on MRI, the more increased expression of MMPs and TIMP-1 appeared. Regarding MMP-13 expression, 86.7% of late-stage disc displacement patients showed grade II or III. Expression level of MMPs or TIMP was not statistically significant associated with joint effusion level. In perforation and/or adhesion groups, all patients showed grade II or III expression of MMP-13. Once perforation occurred, MMP-13 showed increased expression with statistical significance. CONCLUSION: MMP-1 and MMP-13 expression seem to be related to progression of osteoarthritis whereas MMP-8 does not seem to have a specific role with regard to temporomandibular joint disorders. TIMP-1 is considered to be partly related to internal derangement rather than osteoarthritis, but it is not significant.

A nomogram for classification of temporomandibular joint disk perforation based on magnetic resonance imaging.

OBJECTIVE: The aim of this study was to analyze risk factors and establish a prediction model for temporomandibular joint (TMJ) disk perforation by constructing a nomogram. STUDY DESIGN: The study included a total of 282 joints in 274 patients. All patients underwent open TMJ surgery after obtaining magnetic resonance imaging (MRI), from 2005 to 2015. The presence or absence of disk perforation was confirmed during the operation. Patients were classified into 2 groups: perforation and nonperforation groups. We investigated demographic data and the characteristics of the disk, joint space, and bone on MRI. A logistic regression analysis was performed to analyze risk factors. A nomogram was constructed and validated internally and externally. RESULTS: Risk factors for disk perforation were increased age, disk shape (eyeglass or amorphous), low bone marrow signal, abnormal joint space, and 2 or more bony changes in the condyle and fossa. The area under the receiver operating characteristic curve of the nomogram was 0.908 (95% confidence interval [CI] 0.869-0.946) in the internal validation and 0.889 (95% CI 0.804-0.973) in the external validation with good suitability. CONCLUSIONS: We were able to predict the probability of disk perforation with analyzed risk factors and constructed a nomogram, which may be helpful in proper diagnosis and treatment.

Ionic-Liquid-Based Heterogeneous Covalent Triazine Framework Cobalt Catalyst for the Direct Synthesis of Methyl 3-Hydroxybutyrate from Propylene Oxide.

ß-Hydroxy esters are considered as potential building blocks for the production of fine chemicals and potential drug molecules in various industries. Developing an efficient and recyclable catalyst for the synthesis of ß-hydroxy esters is challenging. Here we report the first ionic-liquid-based heterogenized cobalt catalyst, [imidazolium-CTF][Co(CO)4], for the direct ring-opening carbonylation of propylene oxide to methyl 3-hydroxybutyrate (MHB) with 86% selectivity (>99% conversion).

Comparison of volume and position of the temporomandibular joint structures in patients with mandibular asymmetry.

OBJECTIVE: To evaluate the volume and position of the temporomandibular joint structures, specifically the glenoid fossa and the condylar head, in patients with facial asymmetry. STUDY DESIGN: Fifty-six adult patients were divided into two groups-asymmetry group and control group-based on the severity of the mandibular asymmetry, as seen on their orthopantomograms. The volumes and positions of the bilateral temporomandibular joint components were measured by using computed tomography images and a three-dimensional analysis program. Each of the variables was compared between and within the groups. RESULTS: The volumes of the condyle and the glenoid fossa on the side of the smaller condyle were significantly smaller in the asymmetry group (P < .05) than in the control group. The volumetric ratios of the glenoid fossa and the joint space to the condyle were also significantly higher on that side (P < .001). The distance of the uppermost point of the glenoid fossa from the midaxial plane in the smaller condyle was significantly shorter (P < .05) only in the asymmetry group. CONCLUSIONS: When evaluating mandibular asymmetry, the volume of the glenoid fossa and the volume and vertical position of the condylar head need to be considered in addition to length or width of the condylar head.

Effects of Thread Depth in the Neck Area on Peri-Implant Hard and Soft Tissues: An Animal Study.

BACKGROUND: Implants with deep thread depth have been developed for the purpose of increasing total implant surface area. However, effects of implant thread depth remain controversial. The aim of this study is to examine effects of thread depth on peri-implant tissues in terms of bone-implant contact (BIC), bone-implant volume (BIV), and hard and soft tissue dimensions using comprehensive analyses, including microcomputed tomography (micro-CT). METHODS: Five beagle dogs received experimental intramandibular implants 3 months after removal of their premolars and first molars (P2, P3, P4, and M1). Two different types of implants were installed in each animal: deep threaded (DT) and shallow threaded (ST). Resonance frequency testing was performed on the day of implantation as well as 4 and 8 weeks after implantation. Intraoral radiography, micro-CT, and histomorphometry were used to evaluate peri-implant tissues 4 and 8 weeks after implantation. RESULTS: There were no significant differences in resonance frequency test results between the two groups. Although radiographic analysis showed no group differences, micro-CT (P = 0.01) and histomorphometry (P = 0.003) revealed the DT group had significantly lower BIC values than the ST group at 4 weeks. However, by 8 weeks, BIC values of the two groups did not differ significantly. No significant differences in BIV or soft tissue height were observed between the two groups at either time point. CONCLUSION: DT implants showed no benefits over ST implants when inserted in dog mandibles.

Effects of thread size in the implant neck area on peri-implant hard and soft tissues: an animal study.

OBJECTIVES: The aim of this animal study was to examine the effects of thread size in the implant neck area on peri-implant tissues in terms of BIC and hard- and soft-tissue dimensions. MATERIALS AND METHODS: Six Beagle dogs received experimental implants in the mandible 3 month after the removal of premolars and first molars (P2, P3, P4, and M1). Two different types of implants were installed in each animal: Anyone microthread(®) as Group 1 and Anyone(®) as Group 2. Resonance frequency test, intraoral radiography, micro-CT, and histomorphometry were used to evaluate peri-implant tissue after implantation periods of 4 and 8 weeks. RESULTS: No remarkable complication was observed during the healing period in either group. Resonance frequency testing revealed no significant difference between groups. In radiographic evaluation, Group 2 showed more bone loss than Group 1. However, this difference was not statistically significant. In the micro-CT analysis, BIC and BIV values and soft-tissue height were not significant in both groups. Histological analysis revealed no significant difference in BIC ratio, bone density, or bone loss between groups. However, soft-tissue height was significantly greater in Group 2 than in Group 1 (P = 0.0004). CONCLUSION: No difference in peri-implant hard or soft tissues was observed according to thread size in the implant neck area.

Conservative condylectomy alone for the correction of mandibular asymmetry caused by osteochondroma of the mandibular condyle: a report of five cases.

We describe our experience with conservative condylectomy for the correction of facial asymmetry in five patients with osteochondroma of the mandibular condyle. All five patients presented with malocclusion and facial asymmetry, which are common clinical findings of osteochondroma involving the mandibular condyle. We performed conservative condylectomy without additional orthognathic surgery for all five patients, preserving the vertical height of the condylar process as much as possible. Following surgery, intermaxillary traction using a skeletal anchorage system with rubber elastics was performed on all patients to improve occlusion, and, when necessary, additional minimal orthodontic treatment was performed. The mean follow-up period was 42 months. At the last follow-up visit, all patients exhibited satisfactory facial symmetry and remodeling of the remaining condyle, with stable health and no signs of recurrence. In conclusion, conservative condylectomy alone, without subsequent orthognathic surgery, is adequate for the restoration of facial symmetry and the preservation of vertical condylar height in select patients with condylar osteochondroma.