Reformulation of frequency-difference matched-field processor for high-frequency known-source localization.

Frequency-difference matched-field processing is a high-frequency source localization technique formulated by matching the frequency-difference autoproduct of the measured field and replicas at the difference-frequency. Although it successfully localizes sound sources by sparse vertical array in shallow or deep ocean with an environmental mismatch, there is still some ambiguity in replica modeling and signal processing. Here, the existing conventional processor is modified to match the bandwidth-averaged autoproduct of the measured field with replicas of the bandwidth-averaged autoproduct, or approximately its self-term for the expected source locations. The proposed processor is consistent with the perspective of matched-field processing and can naturally relieve some drawbacks of the existing one, such as low peak or low dynamic range on the ambiguity surface. Numerical tests are carried out in several shallow ocean environments and the source localization using experimental data are performed to confirm the properties of the proposed processor. It is found that the high-frequency diffracted field always leaves traces on its bandwidth-averaged autoproduct field. These high-frequency marks cause a bias in source localization in the presence of a sound speed mismatch even in low difference-frequencies.

3D Off-Grid Localization for Adjacent Cavitation Noise Sources Using Bayesian Inference.

The propeller tip vortex cavitation (TVC) localization problem involves the separation of noise sources in proximity. This work describes a sparse localization method for off-grid cavitations to estimates their precise locations while keeping reasonable computational efficiency. It adopts two different grid (pairwise off-grid) sets with a moderate grid interval and provides redundant representations for adjacent noise sources. To estimate the position of the off-grid cavitations, a block-sparse Bayesian learning-based method is adopted for the pairwise off-grid scheme (pairwise off-grid BSBL), which iteratively updates the grid points using Bayesian inference. Subsequently, simulation and experimental results demonstrate that the proposed method achieves the separation of adjacent off-grid cavitations with reduced computational cost, while the other scheme suffers from a heavy computational burden; for the separation of adjacent off-grid cavitations, the pairwise off-grid BSBL took significantly less time (29 s) compared with the time taken by the conventional off-grid BSBL (2923 s).

Modified Smoothing Algorithm for Tracking Multiple Maneuvering Targets in Clutter.

This research work extends the fixed interval smoothing based on the joint integrated track splitting (FIsJITS) filter in the multi-maneuvering-targets (MMT) tracking environment. We contribute to tackling unknown dynamics of the multi-maneuvering-targets (MMT) using the standard kinematic model. This work is referred to as smoothing MMT using the JITS (MMT-sJITS). The existing FIsJITS algorithm is computationally more complex to solve for the MMT situation because it enumerates a substantial number of measurement-to-track assignments and calculates their posteriori probabilities globally. The MMT-sJITS updates a current target track by assuming the joint (common) measurements detected by neighbor tracks are modified clutters (or pretended spurious measurements). Thus, target measurement concealed by a joint measurement is optimally estimated based on measurement density of the modified clutter. This reduces computational complexity and provides improved tracking performance. The MMT-sJITS generates forward tracks and backward tracks using the measurements collected by a sensor such as a radar. The forward and backward multi-tracks state predictions are fused to obtain priori smoothing multi-track state prediction, as well as their component existence probabilities. This calculates the smoothing estimate required to compute the forward JITS state estimate, which reinforces the MMT tracking efficiently. Monte Carlo simulation is used to verify best false-track discrimination (FTD) analysis in comparison with existing multi-targets tracking algorithms.

Incipient tip vortex cavitation localization using block-sparse compressive sensing.

Noise induced by incipient-propeller tip vortex cavitation (TVC) has a few sources near the propeller tips, which radiate a broadband signal. This article describes a compressive sensing (CS)-based TVC localization technique for coherent multiple-frequency processing, which jointly processes the measured data at multiple frequencies. Block-sparse CS, which groups several single-frequency measurements into blocks, is adopted for coherent multiple-frequency processing. The coherent multiple-frequency processing improves localization performance over that of single-frequency processing. Unlike single-frequency processing using conventional CS, which combines independent single-frequency measurement treatments by averaging, coherent multiple-frequency processing produces accurate localization without requiring a sufficient number of treated frequencies, long-time-sampled data with a time-invariant signal assumption, or even a single cavitation event. The approach is demonstrated on experimental data from a transducer source experiment and a cavitation source experiment.