Highly emissive 4-carbazole-appended salen-indium complex: the effect of strong donor-acceptor interaction.

Herein, we report our findings on 4-carbazole (CBZ)-appended salen-based indium complexes, CBZIn1 and CBZIn2, which feature diimine bridges exhibiting different electron-accepting properties. Notably, CBZIn2 exhibited a significantly higher photoluminescence quantum efficiency (PLQY, ΦPL) in toluene than CBZIn1, with a value over 15 times greater (ΦPL = 57.7% for CBZIn2; ΦPL = 3.7% for CBZIn1). In particular, in the rigid state of THF at 77 K, CBZIn2 exhibited a near-unity PLQY of 98.2%. Even in the PMMA film, CBZIn2 maintained a high level of PLQY (ΦPL = 70.2%). These results can be attributed to the highly efficient radiative decay process based on intramolecular charge-transfer (ICT) transition between the moderately twisted CBZ, characterized by its conformational rigidity and the 1,2-dicyanoethylene-bridged salen, which exhibits a strong electron-accepting ability. Furthermore, these findings are supported by theoretical calculations.

Inhibition of topoisomerase I shapes antitumor immunity through the induction of monocyte-derived dendritic cells.

Understanding the rationale of combining immunotherapy and other anticancer treatment modalities is of great interest because of interpatient variability in single-agent immunotherapy. Here, we demonstrated that topoisomerase I inhibitors, a class of chemotherapeutic drugs, can alter the tumor immune landscape, corroborating their antitumor effects combined with immunotherapy. We observed that topotecan-conditioned TC-1 tumors were occupied by a vast number of monocytic cells that highly express CD11c, CD64, and costimulatory molecules responsible for the favorable changes in the tumor microenvironment. Ly6C+MHC-II+CD11chiCD64hi cells, referred to as topotecan-induced monocyte-derived dendritic cells (moDCs), proliferate and activate antigen-specific CD8+ T cells to levels equivalent to those of conventional DCs. Phenotypic changes in Ly6C+ cells towards moDCs were similarly induced by exposure to topotecan in vitro, which was more profoundly facilitated in the presence of tumor cells. Notably, anti-M-CSFR reversed the acquisition of DC-like properties of topotecan-induced moDCs, leading to the abolition of the antitumor effect of topotecan combined with a cancer vaccine. In short, topoisomerase I inhibitors generate monocyte-derived antigen-presenting cells in tumors, which could be mediated by M-CSF-M-CSFR signaling.

Synthesis and Photophysical Properties of a Series of Dimeric Indium Quinolinates.

A novel class of quinolinol-based dimeric indium complexes (1-6) was synthesized and characterized using 1H and 13C(1H) NMR spectroscopy and elemental analysis. Compounds 1-6 exhibited typical low-energy absorption bands assignable to quinolinol-centered π-π* charge transfer (CT) transition. The emission spectra of 1-6 exhibited slight bathochromic shifts with increasing solvent polarity (p-xylene < tetrahydrofuran (THF) < dichloromethane (DCM)). The emission bands also showed a gradual redshift, with an increase in the electron-donating effect of substituents at the C5 position of the quinoline groups. The absolute emission quantum yields (ΦPL) of compounds 1 (11.2% in THF and 17.2% in film) and 4 (17.8% in THF and 36.2% in film) with methyl substituents at the C5 position of the quinoline moieties were higher than those of the indium complexes with other substituents.

Enhanced Immunogenicity of Engineered HER2 Antigens Potentiates Antitumor Immune Responses.

For cancer vaccines, the selection of optimal tumor-associated antigens (TAAs) that can maximize the immunogenicity of the vaccine without causing unwanted adverse effects is challenging. In this study, we developed two engineered Human epidermal growth factor receptor 2 (HER2) antigens, K965 and K1117, and compared their immunogenicity to a previously reported truncated HER2 antigen, K684, within a B cell and monocyte-based vaccine (BVAC). We found that BVAC-K965 and BVAC-K1117 induced comparable antigen-specific antibody responses and antigen-specific T cell responses to BVAC-K684. Interestingly, BVAC-K1117 induced more potent antitumor activity than the other vaccines in murine CT26-HER2 tumor models. In addition, BVAC-K1117 showed enhanced antitumor effects against truncated p95HER2-expressing CT26 tumors compared to BVAC-K965 and BVAC-K684 based on the survival analysis by inducing T cell responses against intracellular domain (ICD) epitopes. The increased ICD epitope-specific T cell responses induced by BVAC-K1117 compared to BVAC-K965 and BVAC-K684 were recapitulated in human leukocyte antigen (HLA)-untyped human PBMCs and HLA-A*0201 PBMCs. Furthermore, we also observed synergistic antitumor effects between BVAC-K1117 and anti-PD-L1 antibody treatment against CT26-HER2 tumors. Collectively, our findings demonstrate that inclusion of a sufficient number of ICD epitopes of HER2 in cellular vaccines can improve the antitumor activity of the vaccine and provide a way to optimize the efficacy of anticancer cellular vaccines targeting HER2.

Response of Scenedesmus quadricauda (Chlorophyceae) to Salt Stress Considering Nutrient Enrichment and Intracellular Proline Accumulation.

Aquatic organisms are exposed to a wide range of salinity, which could critically affect their survival and growth. However, their survival and growth response to salinity stress remain unclear. This study evaluates the growth response and intracellular proline accumulation of green algae, Scenedesmus quadricauda, isolated from brackish water, against dissolved salts stress with N and P enrichment. We tested a hypothesis that nutrient enrichment can relieve the dissolved salts stress of algae by accumulating intracellular proline, thereby improving survival and growth. Four levels of salinity (0, 3, 6, 12 psu) were experimentally manipulated with four levels of nutrient stoichiometry (N:P ratio = 2, 5, 10, 20) at constant N (1 mgN/L) or P levels (0.05 and 0.5 mgP/L). In each set of experiments, growth rate and intracellular proline content were measured in triplicate. The highest level of salinity inhibited the growth rate of S. quadricauda, regardless of the nutrient levels. However, with nutrient enrichment, the alga showed tolerance to dissolved salts, reflecting intracellular proline synthesis. Proline accumulation was most prominent at the highest salinity level, and its maximum value appeared at the highest N:P ratio (i.e., highest N level) in all salinity treatments, regardless of P levels. Therefore, the effects of P and N on algal response to salt stress differ.

Ir-Catalyzed C-H Amidation Using Carbamoyl Azides for the Syntheses of Unsymmetrical Ureas.

An iridium-catalyzed C-H amidation for the syntheses of unsymmetrical urea was developed using carbamoyl azides (R(R')N-C(O)-N3) as the nitrogen source. A combination of iridium and silver gave an active catalyst for C-N bond formation. A variety of urea derivatives were synthesized using carbamoyl azides with only dinitrogen byproducts. Finally, the use of the transient directing group strategy with carbamoyl azides extended the substrate scope of the catalytic C-H amidation to yield aldehyde-containing unsymmetrical ureas.

Spirobifluorene-Based o-Carboranyl Compounds: Insights into the Rotational Effect of Carborane Cages on Photoluminescence.

9,9'-Spirobifluorene-based closo-o-carboranyl (SFC1 and SFC2) compounds and their nido-derivatives (nido-SFC1 and nido-SFC2) were prepared and characterized. The two closo-compounds displayed major absorption bands assignable to π-π* transitions involving the spirobifluorene group, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene moieties. The nido-compounds exhibited slightly blueshifted absorption bands resulting from the absence of the ICT transitions corresponding to the o-carborane moieties due to the anionic character of the nido-o-carboranes. While SFC1 exhibited only high-energy emissions in THF at 298 K (only from locally excited (LE) states assignable to π-π* transitions on the spirobifluorene group), remarkable emissions in the low-energy region were observed in the rigid state such as in THF at 77 K and in the film state. SFC2 displayed intense emissions in the low-energy region in all states. The fact that neither of the nido-derivatives of SFC1 and SFC2 exhibited low-energy emissions and the TD-DFT calculation results of each closo-compound clearly verified that the low-energy emission was based on ICT-based radiative decay. The conformational barriers from each relative energy calculation upon changing the dihedral angles around the o-carborane cages for both compounds confirmed that the rotation of the o-carborane cages and terminal phenyl rings for SFC1 is freer than that for SFC2.

Photophysical Properties of Spirobifluorene-Based o-Carboranyl Compounds Altered by Structurally Rotating the Carborane Cages.

9,9'-Spirobifluorene-based o-carboranyl compounds C1 and C2 were prepared and fully characterized by multinuclear nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. The solid-state structure of C1 was also determined by single-crystal X-ray diffractometry. The two carboranyl compounds display major absorption bands that are assigned to π-π* transitions involving their spirobifluorene groups, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their spirobifluorene groups. While C1 only exhibited high-energy emissions (λem = ca. 350 nm) in THF at 298 K due to locally excited (LE) states assignable to π-π* transitions involving the spirobifluorene group alone, a remarkable emission in the low-energy region was observed in the rigid state, such as in THF at 77 K or the film state. Furthermore, C2 displays intense dual emissive patterns in both high- and low-energy regions in all states. Electronic transitions that were calculated by time-dependent-DFT (TD-DFT) for each compound based on ground (S0) and first-excited (S1) state optimized structures clearly verify that the low-energy emissions are due to ICT-based radiative decays. Calculated energy barriers that are based on the relative energies associated with changes in the dihedral angle around the o-carborane cages in C1 and C2 clearly reveal that the o-carborane cage in C1 rotates more freely than that in C2. All of the molecular features indicate that ICT-based radiative decay is only available to the rigid state in the absence of structural fluctuations, in particular the free-rotation of the o-carborane cage.

Synthesis of o-carborane-functionalized metal-organic frameworks through ligand exchanges for aggregation-induced emission in the solid state.

The carborane (CB)-functionalized ligand was installed in a variety of MOFs through postsynthetic ligand exchange processes. This methodology is a general method for preparing o-CB-functionalized MOFs with known frameworks. Furthermore, the photoluminescence (PL) spectra revealed intriguing aggregation-induced emission (AIE) features following the systematic incorporation of o-CB functionalities into framework-type materials.

Carbazole-Appended Salen-Indium Conjugate Systems: Synthesis and Enhanced Luminescence Efficiency.

Novel carbazole-conjugated salen-In complexes (Cz1 and Cz2) were prepared and fully characterized by 1H and 13C NMR spectroscopy, elemental analysis, and high-resolution mass spectrometry. The major low-energy absorption bands at λabs = 342 nm for Cz1 and 391 nm for Cz2, respectively, are assigned to typical intramolecular charge transfer (ICT) transitions between the carbazole unit and the salen-In center. The solvatochromism effects in various organic solvents and their large Stokes shift distinctly supported the ICT nature. The photoluminescent spectra of Cz1 and Cz2 showed broad emission bands are centered at 459 nm (blue, λex = 354 nm) and 507 nm (green, λex = 396 nm) in THF, respectively, which are typical feature of CT transitions. In particular, Cz1 showed 8-fold enhanced quantum efficiency relative to that of Cz2, at least 10-fold higher than those of the carbazole-free salen-In complexes. Such enhanced luminescence efficiency of Cz1 originated from efficient radiative decay based on the ICT transition between the salen-In moieties and carbazole parts, as well as its structural rigidity in conversion process between the ground (S0) and excited (S1) states. In other words, Cz2 exhibited low quantum yield due to its structural fluctuation, which is free rotation of both the appended carbazole moieties and bridged phenylene rings in conversion between the S0 and S1 structures. Theoretical calculations clearly supported these intriguing results. In addition, these salen-In complexes exhibited high thermal stability (Td5 = 367 °C for Cz1 and 406 °C for Cz2) and electrochemical stability.

Effect of the Metal within Regioisomeric Paddle-Wheel-Type Metal-Organic Frameworks.

The effect of metal on the degree of flexibility upon evacuation of metal-organic frameworks (MOFs) has been revealed with positional control of the organic functionalities. Although Co-, Cu-, and Zn-based DMOFs (DMOF = DABCO MOF, DABCO = 1,4-diazabicyclo[2.2.2]octane) with ortho-ligands (2,3-NH2 Cl) have frameworks that are inflexible upon evacuation, MOFs with para-ligands (2,5-NH2 Cl) showed different N2 uptake amounts after evacuation by metal exchange. Considering that the structural analyses were not fully sufficiently different to explain the drastic changes in N2 adsorption after evacuation, quantum chemical simulation was explored. A new index (η) was defined to quantify the regularity around the metal based on differences in the oxygen-metal-oxygen angles. Within 2,5-NH2 Cl, the η value becomes larger as the metal are varied from Co to Zn. A large η value means that the structures around the metal center are less ordered. These results can be used to explain flexibility changes upon evacuation by altering the metal cation in this regioisomeric system.

Efficient Aluminum Catalysts for the Chemical Conversion of CO2 into Cyclic Carbonates at Room Temperature and Atmospheric CO2 Pressure.

A series of dimeric aluminum compounds [Al(OCMe2 CH2 N(R)CH2 X)]2 [X=pyridin-2-yl, R=H (PyrH ); X= pyridin-2-yl, R=Me (PyrMe ); X=furan-2-yl, R=H (FurH ); X= furan-2-yl, R=Me (FurMe ); X=thiophen-2-yl, R=H (ThioH ); X= thiophen-2-yl, R=Me (ThioMe )] containing heterocyclic pendant group attached to the nitrogen catalyze the coupling of CO2 with epoxides under ambient conditions. In a comparison of their catalytic activities with those of aluminum complexes without pendant groups at N [X=H, R=H (HH ); X=H, R=Me (HMe )] or with non-heterocyclic pendant groups [X=CH2 CH2 OMe, R=H (OMeH ); X=CH2 CH2 NMe2 , R=H (NMe2H ); X=CH2 CH2 NMe2 , R=Me (NMe2Me )], complexes containing heterocycles, in conjunction with (nBu)4 NBr as a cocatalyst, show higher catalytic activities for the synthesis of cyclic carbonates under the same ambient conditions. The best catalyst system for this reaction is PyrH /(nBu)4 NBr system, which gives a turnover number of 99 and a turnover frequency of 4.1 h-1 , making it 14- and 20-times more effective than HH /(nBu)4 NBr and HMe /(nBu)4 NBr, respectively. Although there are no direct interactions between the aluminum and the heteroatoms in the heterocyclic pendants, electronic effects combined with the increased local concentration of CO2 around the active centers influences the catalytic activity in the coupling of CO2 with epoxides. In addition, PyrH /(nBu)4 NBr shows broad epoxide substrate scope and seven terminal epoxides and two internal epoxides undergo the designed reaction.

A Series of Quinolinol-Based Indium Luminophores: A Rational Design Approach for Manipulating Photophysical Properties.

An approach to the design of a series of quinolinol-based indium complexes that can exhibit different optical properties is proposed. Mono-incorporated (Inq1 and InMeq1), bis-incorporated (InMeq2), and tris-incorporated (Inq3 and InMeq3) indium quinolinate complexes have been prepared. These complexes have also been characterized by X-ray crystallography. The photophysical properties of these complexes have also been examined by a combination of experimental and theoretical techniques. The indium complexes with a single quinolinol ligand (Inq1 and InMeq1) showed higher quantum efficiency than those with two or three quinolinate ligands; in particular, InMeq1 exhibited the highest quantum yield [ΦPL = 59% in poly(methyl methacrylate) film]. The insights into the nature of these findings were obtained by the sequential synthesis of the quinolinol-based indium luminophores and a detailed investigation of their structural stability.

Halide-Free and Bifunctional One-Component Catalysts for the Coupling of Carbon Dioxide and Epoxides.

In this paper, we first report a new class of halide-free and bifunctional one-component catalysts for the coupling of CO2 with epoxides. The catalysts do not need halide-based additives or tethered salts attached to the ligand when used for this coupling reaction. As the halide-free and bifunctional one-component catalysts, we chose nonionic and monomeric tetracarbonylchromium(0), tetracarbonylmolybdenum(0), and tetracarbonyltungsten(0) complexes chelated by modified ethylenediamines, namely N, N-dimethylethylenediamine, N, N'-dimethylethylenediamine, N, N, N'-trimethylethylenediamine, and N, N, N', N'-tetramethylethylenediamine. A simple mixture of M(CO)6 (M = Cr, Mo, and W) with the modified ethylenediamines shows only one-third of the activity achieved with the tetracarbonyl metal complexes precoordinated to the corresponding modified ethylenediamines. Increasing the number of methyl substituents on the nitrogen atoms of the ethylenediamine derivatives as well as the chromium metal center in the metal carbonyl complex significantly enhanced the catalytic activity. Thus, among the 12 catalysts tested, tetracarbonyl(tetramethylethylenediamine)chromium(0) exhibited the best catalytic activity under the same reaction conditions. Various terminal and internal epoxides were easily converted into the corresponding cyclic carbonates using this chromium system. Calculations based on density functional theory were also carried out to elucidate the mechanism of the coupling reaction.

Systematic Control of the Overlapping Energy Region for an Efficient Intramolecular Energy Transfer: Functionalized Salen-Al/Triphenylamine Guest-Host Assemblies.

A series of triphenylamine (TPA)-containing salen-Al assembly dyads, [salen(3- tBu-5-R)2Al(OC6H4- p-N(C6H5)2)] [salen = N, N'-bis(salicylidene)ethylenediamine; R = H (D1), tBu (D2), Ph (D3), OMe (D4), and NMe2 (D5)], were prepared in good yield (50-80%) and fully characterized by NMR spectroscopy and elemental analysis. Both the UV/vis absorption and photoluminescence (PL) spectra of D1-D4, except for D5, in a tetrahydrofuran solution exhibited dual patterns, which are assignable to the salen-Al-centered π-π* transition (low-energy region) and the TPA-centered π-π* transition (high-energy region). In particular, the emission spectra of the dyads displayed interesting dual-emissive patterns via a significant intramolecular energy transfer (IET) process between the salen-Al moiety and TPA group. Notably, this IET process was systematically tuned by varying the substituents and dominantly observed in the rigid state. More interestingly, compared to the salen-Al complexes (A1-A4) without the TPA group, D1-D4 exhibited enhanced quantum efficiencies. Time-dependent density functional theory calculations on the S1-optimized structures of D1-D5 further supported these experimental results by indicating the existence of independent transition states between the salen-Al moiety and TPA group in the assembly dyads. The present study reports the first example of salen-Al complexes bearing electron-rich TPA moieties.

Effect of Planarity of Aromatic Rings Appended to o-Carborane on Photophysical Properties: A Series of o-Carboranyl Compounds Based on 2-Phenylpyridine- and 2-(Benzo[b]thiophen-2-yl)pyridine.

Herein, we investigated the effect of ring planarity by fully characterizing four pyridine-based o-carboranyl compounds. o-Carborane was introduced to the C4 position of the pyridine rings of 2-phenylpyridine and 2-(benzo[b]thiophen-2-yl)pyridine (CB1 and CB2, respectively), and the compounds were subsequently borylated to obtain the corresponding CN-chelated compounds CB1B and CB2B. Single-crystal X-ray diffraction analysis of the molecular structures of CB2 and CB2B confirmed that o-carborane is appended to the aryl moiety. In photoluminescence experiments, CB2, but not CB1, showed an intense emission, assignable to intramolecular charge transfer (ICT) transition between the aryl and o-carborane moieties, in both solution and film states. On the other hand, in both solution and film states, CB1B and CB2B demonstrated a strong emission, originating from π-π * transition in the aryl groups, that tailed off to 650 nm owing to the ICT transition. All intramolecular electronic transitions in these o-carboranyl compounds were verified by theoretical calculations. These results distinctly suggest that the planarity of the aryl groups have a decisive effect on the efficiency of the radiative decay due to the ICT transition.

2-Phenylpyridine- and 2-(benzo[b]thiophen-2-yl)pyridine-based o-carboranyl compounds: impact of the structural formation of aromatic rings on photophysical properties.

2-Phenylpyridine- and 2-(benzo[b]thiophen-2-yl)pyridine-based (ppy- and btp-based) o-carboranyl (Car1 and Car2) and their B(CH3)2-C∧N-chelated (Car1B and Car2B) compounds were prepared and fully characterised by multinuclear NMR spectroscopy and elemental analysis. The solid-state structure of Car2B was determined by single-crystal X-ray diffraction, which revealed a four-coordinated dimethylboryl centre. All compounds displayed major absorption bands that were assigned to π-π* transitions involving the ppy and btp moieties, as well as weak intramolecular charge-transfer (ICT) transitions between the o-carboranes and their aryl groups. Furthermore, the chelated compounds exhibited dominant low-energy absorption bands (λabs = 333 nm for Car1B and 383 nm for Car2B) resulting from the reinforcement of ICT transitions that correspond to the o-carborane moieties through the restriction of aromatic-ring free rotation. While Car1 and Car2 did not exhibit photoluminescence emissions in toluene at 298 K, Car1B and Car2B showed intense emissions, which are assignable to π-π* transitions associated with each chelated aryl group. However, Car1 and Car2 evidently emitted at around 450 nm in solution at 77 K, invoked by radiative ICT transitions between the carborane and the ppy or btp moiety, indicating that ICT-based radiative decay is only invigorated in the rigid state in the absence of structural variations, such as C-C bond fluctuations in the carborane cage and aromatic-ring free rotation. Interestingly, while Car1 in the film state exhibited a weak ICT-based emission spectrum, and Car1B and Car2B showed intense emissions originating from π-π* transitions associated with each chelated aryl group, Car2 showed significantly enhanced emissions in the same energy region as that exhibited in solution at 77 K, resulting in a much larger quantum efficiency over that in solution. DFT-optimised structures of Car1 and Car2 in their ground and the first-excited states clearly reveal that the enhanced emissive features of Car2 in the film state are strongly associated with the retained planarity of the btp moiety in both the ground and excited states. The photophysical results for these o-carboranyl compounds definitively reveal that the planarities of the aryl groups appended to the o-carborane decisively affect the efficiency of radiative decay based on ICT involving the o-carborane.

A salen-Al/carbazole dyad-based guest-host assembly: enhancement of luminescence efficiency via intramolecular energy transfer.

A novel class of salen-Al/carbazole dyads (D1 and D2) was synthesized and fully identified. The emission spectra of the dyads presented intriguing dual-emission patterns via an intramolecular energy transfer (IET) state in solution. Furthermore, the IET feature of the dyads was clearly observed in the rigid state. Interestingly, the emission efficiency of the dyads was enhanced by the significant IET process from the carbazole group to the salen-Al moiety. Particularly, D1 exhibited a nearly three-fold enhanced luminescence efficiency compared to the corresponding mononuclear aluminum complexes (A1). Such an emission process of these guest-host systems was further supported by theoretical calculation.

Salen-indium/triarylborane triads: synthesis and ratiometric emission-colour changes by fluoride ion binding.

Salen-based indium triads, [{(3-tBu)2-(5-Mes2B)2-salen}In-Me] (1) and [{(3-tBu)2-(5-Mes2Bphenyl)2-salen}In-Me] (2), bearing triarylborane (TAB) units were prepared and fully characterised by NMR spectroscopy and elemental analysis. The major absorption bands of 1 and 2 appeared in the region centred at 347 nm and 374 nm, respectively, and the intense emission spectra were observed in the sky blue (λem = 491 nm for 1) and bluish-green (λem = 498 nm for 2) regions, respectively. The solvatochromism effects in various organic solvents and computational calculation results strongly suggested that these absorption and emission features are mainly attributed to intramolecular charge transfer (ICT) transitions between the salen ligand moieties and the TAB units. Furthermore, UV-vis and photoluminescence (PL) titration experiments by the addition of fluoride anions demonstrated ratiometric quenching patterns in both the absorption and emission spectra, indicating that binding of the fluoride anion to the boron centres interrupts these ICT transitions in each compound. Interestingly, both triads exhibited a gradual red-shifted response in each emission spectrum upon the addition of the fluoride anions, resulting in a dramatic colour-change to yellow. The computational calculation results of the S1 states revealed that these emission-colour change properties arise from the elevation of HOMO levels, which are mainly localised on the TAB moieties, resulting from the fluoride anion binding to the borane centres.

Akinete germination chamber: An experimental device for cyanobacterial akinete germination and plankton emergence.

Understanding how algal resting cells (e.g. akinetes) germinate and what factors influence their germination rate is crucial for elucidating the development of algal blooms and their succession. While laboratory studies have demonstrated algal germination rate and some key factors affecting the germination, the use of artificially induced akinetes and/or removal of the sediments are obviously limiting in simulating the natural environment when designing such controlled experiments. This study introduce a laboratory Akinete Germination Chamber (AGC) that facilitates research for cyanobacterial akinete germination and emergence in an environment similar to natural conditions while minimizing sediment disturbance. The fundamental difference between AGC method and the conventional microplate method is that AGC incorporates the substrate from the natural environment whereas the microplate method does not employ sediment. Therefore, authors of this study assume that the characteristics of akinete germination between the two methods differ because the sediment influences the germination environment. The present study developed the AGC method as an efficient tool to understand harmful cyanobacterial bloom formation. For validation of the AGC method, this study evaluated akinete germination of Dolichospermum circinale (Anabaena circinalis) with different temperature and nutrient condition and then compared the results with those generated by conventional methods The results showed a marked difference in the maximal germination rate between two methods (78% and 35% in the AGC and the microplate, respectively; p < 0.05) at optimum germination temperature (25 °C for both the AGC and the microplate). The nutrient effect also demonstrated clear difference (p < 0.01) in the germination rate between two methods; 88%, 68% and 78% in the AGC and 15%, 20% and 15% in the microplate with -N+P, +N-P, and +N+P condition of CB medium, respectively. Importantly, both DW and -N-P treatments in the AGC induced a little germination of akinete (4.2 ±â€¯1.4% and 5.0 ±â€¯7.1%, respectively), whereas no germination was occurred in the DW treatment in the microplate, suggesting a possible positive effect of sediment on akinete germination. With these results, this study suspects that these differences were largely attributable to natural sediment. Also sediment-accompanied properties, possibly such as nutrient availability, heat budget, micronutrients, and bacteria might have some potential effects on akinete germination. The AGC method can overcome the limitations of the conventional microplate method, and that it is applicable in studies on pelagic-benthic coupling.