Strain distribution in WS2 monolayers detected through polarization-resolved second harmonic generation.

Two-dimensional (2D) graphene and graphene-related materials (GRMs) show great promise for future electronic devices. GRMs exhibit distinct properties under the influence of the substrate that serves as support through uneven compression/ elongation of GRMs surface atoms. Strain in GRM monolayers is the most common feature that alters the interatomic distances and band structure, providing a new degree of freedom that allows regulation of their electronic properties and introducing the field of straintronics. Having an all-optical and minimally invasive detection tool that rapidly probes strain in large areas of GRM monolayers, would be of great importance in the research and development of novel 2D devices. Here, we use Polarization-resolved Second Harmonic Generation (P-SHG) optical imaging to identify strain distribution, induced in a single layer of WS2 placed on a pre-patterned Si/SiO2 substrate with cylindrical wells. By fitting the P-SHG data pixel-by-pixel, we produce spatially resolved images of the crystal armchair direction. In regions where the WS2 monolayer conforms to the pattern topography, a distinct cross-shaped pattern is evident in the armchair image owing to strain. The presence of strain in these regions is independently confirmed using a combination of atomic force microscopy and Raman mapping.

Biaxial Tensile Strain Enhances Electron Mobility of Monolayer Transition Metal Dichalcogenides.

Strain engineering can modulate the properties of two-dimensional (2D) semiconductors for electronic and optoelectronic applications. Recent theory and experiments have found that uniaxial tensile strain can improve the electron mobility of monolayer MoS2, a 2D semiconductor, but the effects of biaxial strain on charge transport are not well characterized in 2D semiconductors. Here, we use biaxial tensile strain on flexible substrates to probe electron transport in monolayer WS2 and MoS2 transistors. This approach experimentally achieves ∼2× higher on-state current and mobility with ∼0.3% applied biaxial strain in WS2, the highest mobility improvement at the lowest strain reported to date. We also examine the mechanisms behind this improvement through density functional theory simulations, concluding that the enhancement is primarily due to reduced intervalley electron-phonon scattering. These results underscore the role of strain engineering in 2D semiconductors for flexible electronics, sensors, integrated circuits, and other optoelectronic applications.

Observation of Two-Step Spin Transition in Graphene Oxide-Based Hybrids with Iron(II) 4-amino-1,2,4-triazole Spin Crossover Nanoparticles.

A novel experimental protocol based on a reverse micellar method is presented for the synthesis of graphene oxide (GO)-based hybrids with spin crossover nanoparticles (SCO NPs) of the 1D iron(II) coordination polymer with the formula [Fe(NH2trz)3](Br2). By introducing different quantities of 0.5% and 1.0% of GO (according to iron(II)) into the aqueous phase, two hybrids, NP4 and NP5, were synthesized, respectively. The morphological homogeneity of the NPs on the surface of the GO flakes is greatly improved in comparison to the pristine [Fe(NH2trz)3](Br2) NPs. From the magnetic point of view and at a low magnetic sweep rate of 1 K/min, a two-step hysteretic behavior is observed for NP4 and NP5, where the onset of the low-temperature second step appeared at 40% and 30% of the HS fraction, respectively. For faster sweep rates of 5-10 K/min, the two steps from the cooling branch are progressively smeared out, and the critical temperatures observed are T1/2↑ = 343 K and T1/2↓ = 288 K, with a thermal width of 55 K for both NP4 and NP5. A Raman laser power-assisted protocol was used to monitor the thermal tolerance of the hybrids, while XPS analysis revealed electronic interactions between the SCO NPs and the GO flakes.

Development of Erf-Mediated Craniosynostosis and Pharmacological Amelioration.

ETS2 repressor factor (ERF) insufficiency causes craniosynostosis (CRS4) in humans and mice. ERF is an ETS domain transcriptional repressor regulated by Erk1/2 phosphorylation via nucleo-cytoplasmic shuttling. Here, we analyze the onset and development of the craniosynostosis phenotype in an Erf-insufficient mouse model and evaluate the potential of the residual Erf activity augmented by pharmacological compounds to ameliorate the disease. Erf insufficiency appears to cause an initially compromised frontal bone formation and subsequent multisuture synostosis, reflecting distinct roles of Erf on the cells that give rise to skull and facial bones. We treated animals with Mek1/2 and nuclear export inhibitors, U0126 and KPT-330, respectively, to increase Erf activity by two independent pathways. We implemented both a low dosage locally over the calvaria and a systemic drug administration scheme to evaluate the possible indirect effects from other systems and minimize toxicity. The treatment of mice with either the inhibitors or the administration scheme alleviated the synostosis phenotype with minimal adverse effects. Our data suggest that the ERF level is an important regulator of cranial bone development and that pharmacological modulation of its activity may represent a valid intervention approach both in CRS4 and in other syndromic forms of craniosynostosis mediated by the FGFR-RAS-ERK-ERF pathway.

Observation of two-step spin transition in iron(II) 4-amino-1,2,4-triazole based spin crossover nanoparticles.

A synthetically controllable two-step spin transition was observed in iron(II) spin crossover nanoparticles of the dehydrated one-dimensional coordination polymer [Fe(NH2trz)3]Br2 (NH2trz = 4-amino-1,2,4-triazole) using the reverse micellar method. The change from two-step to one-step hysteretic characteristics succeeded by changing the reaction time.

Structural Defects Modulate Electronic and Nanomechanical Properties of 2D Materials.

Two-dimensional materials such as graphene and molybdenum disulfide are often subject to out-of-plane deformation, but its influence on electronic and nanomechanical properties remains poorly understood. These physical distortions modulate important properties which can be studied by atomic force microscopy and Raman spectroscopic mapping. Herein, we have identified and investigated different geometries of line defects in graphene and molybdenum disulfide such as standing collapsed wrinkles, folded wrinkles, and grain boundaries that exhibit distinct strain and doping. In addition, we apply nanomechanical atomic force microscopy to determine the influence of these defects on local stiffness. For wrinkles of similar height, the stiffness of graphene was found to be higher than that of molybdenum disulfide by 10-15% due to stronger in-plane covalent bonding. Interestingly, deflated graphene nanobubbles exhibited entirely different characteristics from wrinkles and exhibit the lowest stiffness of all graphene defects. Density functional theory reveals alteration of the bandstructures of graphene and MoS2 due to the wrinkled structure; such modulation is higher in MoS2 compared to graphene. Using this approach, we can ascertain that wrinkles are subject to significant strain but minimal doping, while edges show significant doping and minimal strain. Furthermore, defects in graphene predominantly show compressive strain and increased carrier density. Defects in molybdenum disulfide predominantly show tensile strain and reduced carrier density, with increasing tensile strain minimizing doping across all defects in both materials. The present work provides critical fundamental insights into the electronic and nanomechanical influence of intrinsic structural defects at the nanoscale, which will be valuable in straintronic device engineering.

Efficient Mechanical Stress Transfer in Multilayer Graphene with a Ladder-like Architecture.

We report that few graphene flakes embedded into polymer matrices can be mechanically stretched to relatively large deformation (>1%) in an efficient way by adopting a particular ladder-like morphology consisting of consecutive mono-, bi-, tri-, and four-layer graphene units. In this type of flake architecture, all of the layers adhere to the surrounding polymer inducing similar deformation on the individual graphene layers, preventing interlayer sliding and optimizing the strain transfer efficiency. We have exploited Raman spectroscopy to quantify this effect from a mechanical standpoint. The finite element method and molecular dynamics simulations have been used to interpret the above experimental findings. The results suggest that a step pyramid-like architecture of a flake can be ideal for efficient loading of layered materials embedded into a polymer and that there are two prevailing mechanisms that govern axial stress transfer, namely, interfacial shear transfer and axial transmission through the ends. This concept can be easily applied to other two-dimensional materials and related van der Waals heterostructures fabricated either by mechanical exfoliation or chemical vapor deposition by appropriate patterning. This work opens new perspectives in numerous applications, including high volume fraction composites, flexible electronics, and straintronic devices.

Mechanical, Electrical, and Thermal Properties of Carbon Nanotube Buckypapers/Epoxy Nanocomposites Produced by Oxidized and Epoxidized Nanotubes.

High volume fraction carbon nanotube (CNT) composites (7.5-16% vol.) were fabricated by the impregnation of CNT buckypapers into epoxy resin. To enhance the interfacial reaction with the epoxy resin, the CNTs were modified by two different treatments, namely, an epoxidation treatment and a chemical oxidation. The chemical treatment was found to result in CNT length severance and to affect the porosity of the buckypapers, having an important impact on the physico-mechanical properties of the nanocomposites. Overall, the mechanical, electrical, and thermal properties of the impregnated buckypapers were found to be superior of the neat epoxy resin, offering an attractive combination of mechanical, electrical, and thermal properties for multifunctional composites.

Spin-Crossover Phenomenon in Microcrystals and Nanoparticles of a [Fe(2-mpz)2Ni(CN)4] Two-Dimensional Hofmann-Type Polymer: A Detailed Nano-Topographic Study.

The diamagnetic two-dimensional Hofmann-type metal-organic framework [ZnII(2-mpz)2Ni(CN)4] has been successfully synthesized along with its isostructural hysteretic spin-crossover FeII analogue in the form of both bulk microcrystalline powder and nanoparticles. Detailed atomic force microscopy topographic study revealed a nanogrowth relationship between the height and length of the nanoparticle.

Strain Engineering in Highly Wrinkled CVD Graphene/Epoxy Systems.

Chemical vapor deposition (CVD) is regarded as a promising fabrication method for the automated, large-scale, production of graphene and other two-dimensional materials. However, its full commercial exploitation is limited by the presence of structural imperfections such as folds, wrinkles, and even cracks that downgrade its physical and mechanical properties. For example, as shown here by means of Raman spectroscopy, the stress transfer from an epoxy matrix to CVD graphene is on average 30% of that of exfoliated monolayer graphene of over 10 µm in dimensions. However, in terms of electrical response, the situation is reversed; the resistance has been found here to decrease by the imposition of mechanical deformation possibly due to the opening up of the structure and the associated increase of electron mobility. This finding paves the way for employing CVD graphene/epoxy composites or coatings as conductive "networks" or bridges in cases for which the conductivity needs to be increased or at least retained when the system is under deformation. The tuning/control of such systems and their operative limitations are discussed here.

Noncovalent Grafting of a DyIII2 Single-Molecule Magnet onto Chemically Modified Multiwalled Carbon Nanotubes.

While synthetic methods for the grafting of nanoparticles or photoactive molecules onto carbon nanotubes (CNTs) have been developed in the last years, a very limited number of reports have appeared on the grafting of single-molecule magnets (SMMs) onto CNTs. There are many potential causes, mainly focused on the fact that the attachment of molecules on surfaces remains not trivial and their magnetic properties are significantly affected upon attachment. Nevertheless, implementation of this particular type of hybrid material in demanding fields such as spintronic devices makes of utmost importance the investigation of new synthetic protocols for effective grafting. In this paper, we demonstrate a new experimental protocol for the noncovalent grafting of DyIII2 SMM, [Dy2(NO3)2(saph)2(DMF)4], where H2saph = N-salicylidene- o-aminophenol and DMF = N, N-dimethylformamide, onto the surface of functionalized multiwalled CNTs (MWCNTs). We present a simple wet chemical method, followed by an extensive washing protocol, where the cross-referencing of data from high-resolution transmission electron microscopy combined with electron energy loss spectroscopy, conventional magnetic measurements (direct and alternating current), X-ray photoelectron spectroscopy, and Raman spectroscopy was used to investigate the physical properties, chemical nature, and overall magnetic behavior of the resulting hybrids. A key point to the whole synthesis involves the functionalization of MWCNTs with carboxylic groups, which proved to be a powerful strategy for enhancing the ability to process MWCNTs and facilitating the preparation of hybrid composites. While in the majority of analogous hybrid materials the raw carbon material (multiwalled or single-walled nanotubes) is heavily treated to minimize the contribution of contaminant traces of magnetic nanoparticles with important effects on their electronic properties, this method can lead easily to elimination of the largest part of the impurities and provide an effective way to investigate/discriminate the magnetic contribution of the SMM molecules.

An Evaluation of Graphene as a Multi-Functional Heating Element for Biomedical Applications.

Graphene has been found to be an excellent heat-conductor due to the high speed of acoustic phonons in its lattice. In this work, we examine in depth a commercial graphene-based waist protector which uses graphene as a heating element. By employing thermal imaging in tandem with Raman microscopy, the thermal characteristics and performance of this device is fully assessed. It will be shown that no pronounced variation in its function is observed up to 3 hours of continuous operation and that the device seems to work effectively as an IR emitter at low power consumption. Temperature fluctuations, associated with a decrease of its electrical resistance are observed after 12 hours uptime and a temperature difference of 15 °C was recorded after 5 days of uninterrupted operation. These effects are thought to be due to the loss of graphene/polymer adhesion resulting from thermal fatigue. Overall, it is demonstrated that graphene can indeed be incorporated as an effective and operational thermal heating system in similar biomedical devices.

Comparison of yields and properties of microbial polyhydroxyalkanoates generated from waste glycerol based substrates.

The accumulation efficiency and the properties of polyhydroxyalkanoates (PHAs) produced from acidified waste glycerol (AWG) and its derivatives via an enriched microbial consortium derived from soil, were investigated in this study. AWG consisted mainly from short chain fatty acids, 1,3 propanediol and residual glycerol, which were also evaluated individually as substrates. Accumulation capacity and yields were estimated after solvent extraction and purification and PHAs were further analyzed in terms of their chemical structure, thermal properties, molecular masses and mechanical properties. The lowest accumulation capacity was noticed for non-acidified waste glycerol as carbon source which led to the generation of P(3HB), whereas for the other carbon sources co-polymers of 3HB with 3HV or 3HHx were produced. Average molecular mass weights were quite high in all cases reaching ~1.8×106Da. The thermal properties and the mechanical behavior of PHAs were shown to be highly affected by their monomeric composition, whereas it was also concluded that DSC and DMA results were in good agreement.

Wrinkled Few-Layer Graphene as Highly Efficient Load Bearer.

Multilayered graphitic materials are not suitable as load-bearers due to their inherent weak interlayer bonding (for example, graphite is a solid lubricant in certain applications). This situation is largely improved when two-dimensional (2D) materials such as a monolayer (SLG) graphene are employed. The downside in these cases is the presence of thermally or mechanically induced wrinkles which are ubiquitous in 2D materials. Here we set out to examine the effect of extensive large wavelength/amplitude wrinkling on the stress transfer capabilities of exfoliated simply supported graphene flakes. Contrary to common belief we present clear evidence that this type of "corrugation" enhances the load-bearing capacity of few-layer graphene as compared to "flat" specimens. This effect is the result of the significant increase of the graphene/polymer interfacial shear stress per increment of applied strain due to wrinkling and paves the way for designing affordable graphene composites with highly improved stress-transfer efficiency.

Mechanical Stability of Flexible Graphene-Based Displays.

The mechanical behavior of a prototype touch panel display, which consists of two layers of CVD graphene embedded into PET films, is investigated in tension and under contact-stress dynamic loading. In both cases, laser Raman spectroscopy was employed to assess the stress transfer efficiency of the embedded graphene layers. The tensile behavior was found to be governed by the "island-like" microstructure of the CVD graphene, and the stress transfer efficiency was dependent on the size of graphene "islands" but also on the yielding behavior of PET at relatively high strains. Finally, the fatigue tests, which simulate real operation conditions, showed that the maximum temperature gradient developed at the point of "finger" contact after 80 000 cycles does not exceed the glass transition temperature of the PET matrix. The effect of these results on future product development and the design of new graphene-based displays are discussed.

Graphene flakes under controlled biaxial deformation.

Thin membranes, such as monolayer graphene of monoatomic thickness, are bound to exhibit lateral buckling under uniaxial tensile loading that impairs its mechanical behaviour. In this work, we have developed an experimental device to subject 2D materials to controlled equibiaxial strain on supported beams that can be flexed up or down to subject the material to either compression or tension, respectively. Using strain gauges in tandem with Raman spectroscopy measurements, we monitor the G and 2D phonon properties of graphene under biaxial strain and thus extract important information about the uptake of stress under these conditions. The experimental shift over strain for the G and 2D Raman peaks were found to be in the range of 62.3 ± 5 cm(-1)/%, and 148.2 ± 6 cm(-1)/%, respectively, for monolayer but also bilayer graphenes. The corresponding Grüneisen parameters for the G and 2D peaks were found to be between 1.97 ± 0.15 and 2.86 ± 0.12, respectively. These values agree reasonably well with those obtained from small-strain bubble-type experiments. The results presented are also backed up by classical and ab initio molecular dynamics simulations and excellent agreement of Γ-E2g shifts with strains and the Grüneisen parameter was observed.

Suspended monolayer graphene under true uniaxial deformation.

2D crystals, such as graphene, exhibit the higher strength and stiffness of any other known man-made or natural material. So far, this assertion has been primarily based on modelling predictions and on bending experiments in combination with pertinent modelling. True uniaxial loading of suspended graphene is not easy to accomplish; however such an experiment is of paramount importance in order to assess the intrinsic properties of graphene without the influence of an underlying substrate. In this work we report on uniaxial tension of graphene up to moderate strains of ∼0.8%. This has been made possible by sandwiching the graphene flake between two polymethylmethacrylate (PMMA) layers and by suspending its central part by the removal of a section of PMMA with e-beam lithography. True uniaxial deformation is confirmed by the measured large phonon shifts with strain by Raman spectroscopy and the indication of lateral buckling (similar to what is observed for thin macroscopic membranes under tension). Finally, we also report on how the stress is transferred to the suspended specimen through the adhesive grips and determine the value of interfacial shear stress that is required for efficient axial loading in such a system.

Deformation of wrinkled graphene.

The deformation of monolayer graphene, produced by chemical vapor deposition (CVD), on a polyester film substrate has been investigated through the use of Raman spectroscopy. It has been found that the microstructure of the CVD graphene consists of a hexagonal array of islands of flat monolayer graphene separated by wrinkled material. During deformation, it was found that the rate of shift of the Raman 2D band wavenumber per unit strain was less than 25% of that of flat flakes of mechanically exfoliated graphene, whereas the rate of band broadening per unit strain was about 75% of that of the exfoliated material. This unusual deformation behavior has been modeled in terms of mechanically isolated graphene islands separated by the graphene wrinkles, with the strain distribution in each graphene island determined using shear lag analysis. The effect of the size and position of the Raman laser beam spot has also been incorporated in the model. The predictions fit well with the behavior observed experimentally for the Raman band shifts and broadening of the wrinkled CVD graphene. The effect of wrinkles upon the efficiency of graphene to reinforce nanocomposites is also discussed.

Stress transfer mechanisms at the submicron level for graphene/polymer systems.

The stress transfer mechanism from a polymer substrate to a nanoinclusion, such as a graphene flake, is of extreme interest for the production of effective nanocomposites. Previous work conducted mainly at the micron scale has shown that the intrinsic mechanism of stress transfer is shear at the interface. However, since the interfacial shear takes its maximum value at the very edge of the nanoinclusion it is of extreme interest to assess the effect of edge integrity upon axial stress transfer at the submicron scale. Here, we conduct a detailed Raman line mapping near the edges of a monolayer graphene flake that is simply supported onto an epoxy-based photoresist (SU8)/poly(methyl methacrylate) matrix at steps as small as 100 nm. We show for the first time that the distribution of axial strain (stress) along the flake deviates somewhat from the classical shear-lag prediction for a region of ∼ 2 µm from the edge. This behavior is mainly attributed to the presence of residual stresses, unintentional doping, and/or edge effects (deviation from the equilibrium values of bond lengths and angles, as well as different edge chiralities). By considering a simple balance of shear-to-normal stresses at the interface we are able to directly convert the strain (stress) gradient to values of interfacial shear stress for all the applied tensile levels without assuming classical shear-lag behavior. For large flakes a maximum value of interfacial shear stress of 0.4 MPa is obtained prior to flake slipping.

Failure processes in embedded monolayer graphene under axial compression.

Exfoliated monolayer graphene flakes were embedded in a polymer matrix and loaded under axial compression. By monitoring the shifts of the 2D Raman phonons of rectangular flakes of various sizes under load, the critical strain to failure was determined. Prior to loading care was taken for the examined area of the flake to be free of residual stresses. The critical strain values for first failure were found to be independent of flake size at a mean value of -0.60% corresponding to a yield stress up to -6 GPa. By combining Euler mechanics with a Winkler approach, we show that unlike buckling in air, the presence of the polymer constraint results in graphene buckling at a fixed value of strain with an estimated wrinkle wavelength of the order of 1-2 nm. These results were compared with DFT computations performed on analogue coronene/PMMA oligomers and a reasonable agreement was obtained.