Narrowband, intracavity-pumped, type-II BaGa2GeSe6 optical parametric oscillator.

We present a tunable (6.62-11.34 µm), singly-resonant, cascade optical parametric oscillator with intracavity pumping of BaGa2GeSe6 in the second stage and spectral narrowing realized by a Volume Bragg Grating acting on the signal wave of the first stage which serves as a pump for the second stage. The maximum energy achieved near 8 µm in the narrowband regime is 1.1 mJ at 100 Hz (spectral width: ∼20 cm-1, pulse duration: ∼7 ns). The overall conversion efficiency from 1 to 8 µm for broadband and narrowband operation is 4.0% and 3.1%, respectively, corresponding to quantum efficiencies of 31% and 23%.

Highly efficient, high average power, narrowband, pump-tunable BWOPO.

We demonstrate a continuously tunable mid-infrared source that produces narrowband radiation at 1981 nm and 2145 nm based on a tunable Yb-based hybrid MOPA pump and a backward-wave optical parametric oscillator (BWOPO). The BWOPO employs a PPRKTP crystal with 580 nm domain periodicity. The BWOPO has a record-low oscillation threshold of 19.2 MW/cm2 and generates mJ level output with an overall efficiency exceeding 70%, reaching an average power of 5.65W at the repetition rate of 5 kHz. The system is mechanically robust and optical cavity-free, making it suitable for spectroscopic systems on mobile platforms. The mid-infrared signal frequency is tuned by pump tuning with a linear pump-to-signal frequency translation rate close to the predicted 1 to 1.001 Hz/Hz.

Multi-transversal mode pumping of narrow-bandwidth backward wave optical parametric oscillator.

A stable, narrow-bandwidth (274 MHz) backward wave optical parametric oscillator (BWOPO) generating mJ-level backward signal at 1885nm and forward idler at 2495 nm is presented. The BWOPO was pumped by a single-longitudinal mode, Q-switched Nd:YAG high-energy laser at 1064 nm. We show that multi-transversal mode pumping leads to the spectral broadening of the BWOPO backward signal and the generation of nanosecond pulses 2.7 times above the Fourier transform limit. We demonstrate over 100 GHz continuous tuning of the parametric output by adjusting the temperature of the BWOPO crystal, showcasing the significant role of thermal expansion in tuning performance. The BWOPO signal was used as a seed for a single-stage PPRKTP optical parametric amplifier (OPA) to boost the narrowband signal and idler energies to 20 mJ. This combination of mJ-level BWOPO seed with a single-stage PPRKTP OPA comprises a simple concept that would benefit long-range differential absorption lidar (DIAL) in the near and mid-infrared regions.

Efficient first-order quasi-phase-matched backward second-harmonic generation.

We demonstrate first-order quasi-phase-matched backward second-harmonic generation (BSHG) with an efficiency of 18.7%. This represents an increase by two orders of magnitude from earlier experiments employing higher-order quasi-phase-matching. The efficient BSHG is demonstrated in bulk periodically poled Rb:KTiOPO4 with a poling period of 317 nm. Using these structures, the frequency doubling in the backward direction is achieved for the fundamental wavelength of 2309 nm. Here we report on the experimental investigation of the BSHG properties such as spectral bandwidth, temperature tuning, and temperature bandwidth by employing broadband and narrowband fundamental wavelength sources. The BSHG properties are compared with those of co-propagating second harmonic generation to reveal the BSHG potential for novel applications that were proposed theoretically but have not been realized in practice so far.

Range-resolved detection of boundary layer stable water vapor isotopologues using a ground-based 1.98 µm differential absorption LIDAR.

This paper presents a first demonstration of range-resolved differential absorption LIDAR (DIAL) measurements of the water vapor main isotopologue H2 16O and the less abundant semi-heavy water isotopologue HD16O with the aim of determining the isotopic ratio. The presented Water Vapor and Isotope Lidar (WaVIL) instrument is based on a parametric laser source emitting nanosecond pulses at 1.98 µm and a direct-detection receiver utilizing a commercial InGaAs PIN photodiode. Vertical profiles of H2 16O and HD16O were acquired in the planetary boundary layer in the suburban Paris region up to a range of 1.5 km. For time averaging over 25 min, the achieved precision in the retrieved water vapor mixing ratio is 0.1 g kg-1 (2.5% relative error) at 0.4 km above ground level (a.g.l.) and 0.6 g kg-1 (20%) at 1 km a.g.l. for 150 m range bins along the LIDAR line of sight. For HD16O, weaker absorption has to be balanced with coarser vertical resolution (600 m range bins) in order to achieve similar relative precision. From the DIAL measurements of H2 16O and HD16O, the isotopic abundance δD was estimated as -51‰ at 0.4 km above the ground and -119‰ in the upper part of the boundary layer at 1.3 km a.g.l. Random and systematic errors are discussed in the form of an error budget, which shows that further instrumental improvements are required on the challenging path towards DIAL-profiling of the isotopic abundance with range resolution and precision suitable for water cycle studies.

Self-mode-locking through intra-cavity sum-frequency generation.

A new technique for mode-locking is demonstrated based on two lasers sharing one leg for sum-frequency generation. When the two lasers had equal round trip time one will produce bright pulses and the other dark pulses. Both lasers used Nd:YVO4 as the gain material, but operated at different wavelengths, namely 1064 nm and 1342 nm. In the present configuration, sub-250 ps pulses were generated at a repetition rate of 276 MHz with an output power of 70 mW. With appropriate choice of round trip loss at the two wavelengths it was possible to choose which laser was generating the bright pulses.

Intra-cavity dark pulse generation through synchronized sum-frequency mixing.

A Nd:YVO4 laser operating at 1064 nm generating a stable mode-locked train of 10 ps-long dark pulses with a 211 MHz repetition rate is presented. The mode-locking relies on a periodic loss modulation produced by intra-cavity sum-frequency mixing with a synchronous bright-pulse train from a mode-locked femtosecond Yb:KYW laser at 1040 nm. A modulation depth of 90% was achieved for the dark pulses, confirmed by cross-correlation measurements. The ultrafast loss modulation injects power into the Nd:YVO4 laser cavity modes beyond the laser gain bandwidth. At proper laser cavity length, the detuning interaction of these modes with the lasing modes leads to the generation of periodic ultrafast transients at frequencies above 1.5 THz.

Room temperature photon-counting lidar at 3 µm.

A midinfrared single-photon-counting lidar at 3 µm is presented. The 3 µm photons were upconverted to 790 nm in a periodically poled rubidium-doped KTiOPO4 crystal through intracavity mixing inside a 1064 nm Nd:YVO4 laser and detected using a conventional silicon single-photon avalanche detector (SPAD). The lidar system could distinguish 1 mm deep features on a diffusely reflecting target, limited by the SPAD and time-tagging electronics. This technique could easily be extended to longer wavelengths within the transparency of the nonlinear crystal.

A comparative study of an Yb-doped fiber gain-managed nonlinear amplifier seeded by femtosecond fiber lasers.

In this work, we show that the nonlinear evolution of femtosecond seed pulses with different parameters (temporal and spectral shapes, repetition rate, pulse energy) in an Yb-fiber amplifier leads to gain-managed nonlinear amplification, enabling robust generation of high-peak-power and nearly transform-limited pulses after external compression. We demonstrate a compressed pulse duration of 33 fs with an energy of 80.5 nJ and a peak power of 2.29 MW for a source with a repetition rate of 30 MHz. For a second seed source with a repetition rate of 125 MHz, we obtained a pulse duration of 51 fs with an energy of 22.8 nJ and a peak power of 420 kW. Numerical simulations incorporating rate equations and nonlinear propagation in the amplifier provide evolutions that agree well with the experimental results. The discrepancies in the amplifier's absorption edge appearing at low repetition rates and higher pump powers are attributed to the temperature dependence of the amplifier's gain cross-sections. Here, we experimentally verify this attribution and thus underline the importance of accounting for the fiber core temperature for precise modelling of the short-wavelength spectral edge of the output pulses in nonlinear Yb-fiber amplifiers. We also measure, for the first time, the relative intensity noise of an amplifier operating in the gain-managed nonlinear regime. The measurements reveal a significant contribution of the amplification process to the overall output noise of the system.

Two-photon-absorption enhanced terahertz generation from KTP optically pumped in the visible-to-UV range.

By generating terahertz pulses in KTP crystals through optical rectification with a pump photon energy varying from below to above the bandgap, we observe a peak of the THz signal at the bandgap energy but also a second one around half the bandgap. This later one is attributed to a two-photon absorption enhanced nonlinearity, which is validated by the similarity of the two-photon absorption coefficient and THz peak amplitude data versus the pump photon energy. A careful analysis of the KTP sample absorption spectral dependence nearby the bandgap demonstrates that KTP is an indirect bandgap crystal, whose absorption below the bandgap involves emission of a phonon related to the symmetric Ti-O stretching vibration, i.e. the ν1 (A1g) mode.

µJ-level multi-cycle terahertz generation in a periodically poled Rb:KTP crystal.

We demonstrate multi-cycle terahertz (MC-THz) generation in a 15.5 mm long periodically poled rubidium (Rb)-doped potassium titanyl phosphate (Rb:PPKTP) crystal with a poling period of 300 µm. By cryogenically cooling the crystal to 77 K, up to 0.72 µJ terahertz energy is obtained at a frequency of 0.5 THz with a 3 GHz bandwidth. A maximum internal optical-to-terahertz conversion efficiency of 0.16% is achieved, which is comparable with results achieved using periodically poled lithium niobate crystal. Neither photorefractive effects nor damage was observed with up to 900mJ/cm2, showing the great potential of Rb:PPKTP for multi-millijoule-level MC-THz generation.

Long-wave infrared multi-wavelength optical source for standoff detection of chemical warfare agents.

We have designed and built a wavelength-tunable optical source for standoff detection of gaseous chemicals by differential absorption spectrometry in the long-wave infrared. It is based on a nanosecond 2 µm single-frequency optical parametric oscillator, whose idler wave is amplified in large aperture Rb:PPKTP crystals. The signal and idler waves are mixed in ZnGeP2 crystals to produce single-frequency tunable radiation in the 7.5-10.5 µm range. The source was integrated into a direct detection lidar to measure sarin and sulfur mustard inside a closed chamber, in an integrated path configuration with a noncooperative target.

Development and experimental demonstration of negative first-order quasi-phase matching in a periodically poled Rb-doped KTiOPO4 crystal.

We worked on a new scheme of quasi-phase matching (QPM) based on the negative first order of the spatial modulation of the sign of the second-order nonlinearity. Applying this scheme in the case of angular-QPM (AQPM) in a biaxial crystal reveals new directions of propagation for efficient parametric frequency conversion as well as "giant" spectral acceptances. The experimental validation is performed in a periodically poled rubidium-doped KTiOPO4 biaxial crystal. This new approach naturally extends to other periodically poled uniaxial crystals such as periodically poled LiNbO3.

High resolution and sensitivity up-conversion mid-infrared photon-counting LIDAR.

A single-photon-counting mid-infrared LIDAR is presented. 2.4 µm mid-infrared photons were up-converted to 737 nm by intra-cavity mixing in a periodically poled rubidium-doped KTiOPO4 crystal inside a Nd:YVO4 laser. The up-converted photons were detected by a Si single-photon avalanche photodiode (SPAD). A temporal resolution of 42 ps and a dark count rate of 500 Hz were achieved, limited by the SPAD and ambient light leakage. It allowed for detection of two targets separated by only a few millimeters. This technique is easily extendable to longer wavelengths, limited primarily by the nonlinear crystal transparency.

Coherent phase transfer and pulse compression at 1.4 µm in a backward-wave OPO.

The frequency modulation transfer property of a backward-wave optical parametric oscillator (BWOPO) is investigated in the context of near-IR pulse compression. The maximum transferrable bandwidth from the pump to the forward wave in a BWOPO is determined by the group dispersion mismatch. In comparison, the third-order phase introduced in a single-grating compressor setup is more detrimental to achieve optimum compression of the BWOPO forward wave. Nevertheless, we demonstrate a 220 GHz bandwidth transfer from 800 nm to 1.4 µm, with a compression factor of 115, leading to near-IR pulses as short as 1.3 ps with µJ energy.

Narrowband, tunable, infrared radiation by parametric amplification of a chirped backward-wave OPO signal.

The strict momentum conservation constraints for backward-wave optical parametric oscillators (BWOPOs) gives an inherently narrowband backward-generated wave, even with broadband pumping. Unfortunately, the limited tuning range of this wave restricts potential applications. Here we demonstrate a method to circumvent this restriction and increase the tuning range by more than one order of magnitude. A linearly chirped pump modulation is transferred to the forward-generated BWOPO wave, which is then mixed with an identically chirped pump in a conventional optical parametric amplifier to obtain narrowband (38 GHz), broadly tunable, infrared radiation around 1.86 µm, with an output energy of 19 µJ.

Demonstration of terahertz ferroelectric metasurface using a simple and scalable fabrication method.

We report on experimental implementation of a ferroelectric metasurface using an x-cut KTiOPO4 (KTP) crystal for efficient manipulation of terahertz (THz) radiation. Based on the multipolar resonances that are accommodated in KTP micro-blocks in a square array, the metasurface is fabricated by precision diamond-blade dicing. Adjusting the size of the KTP micro-blocks to tailor the relative spectral positions of the anisotropic multipolar resonances, we demonstrate a subwavelength-thin THz polarizer that functions as a transparent film in the y-direction and a magnetic mirror in the z-direction with a transmission contrast of 13 dB near 0.37 THz (820 µm). The ferroelectric-based all-dielectric metasurface will provide a versatile platform to engineer the THz waves in the far field and could potentially be combined with THz generation in the same material.

Validation of the angular quasi-phase-matching theory for the biaxial optical class using PPRKTP.

We report the first experimental validation of angular quasi-phase-matching (AQPM) theory in a biaxial crystal by performing second-harmonic generation (SHG) in the periodically-poled Rb-doped KTiOPO4 (PPRKTP) crystal cut as a sphere. Both AQPM and birefringence phase-matching (BPM) angles were measured thanks to a Kappa circle.

All-dielectric KTiOPO4 metasurfaces based on multipolar resonances in the terahertz region.

We employ ferroelectrics to study the multipolar scattering in all-dielectric metasurfaces based on KTiOPO4 (KTP) micro-disks for efficient manipulation of electromagnetic waves in the THz spectral region (0.6-1.5 THz). By adjusting the aspect ratio of the disks near the multipolar resonances, we show that the KTP disk array can form a multifunctional metasurface that covers the entire range of the electromagnetic response with resonantly enhanced anisotropic properties. The proposed ferroelectric metasurfaces will provide a versatile platform to manipulate THz waves, and open possibilities to monolithically combine it with THz generation.

Highly efficient mirrorless optical parametric oscillator pumped by nanosecond pulses.

A highly efficient mirrorless optical parametric oscillator (MOPO), pumped by narrowband nanosecond pulses at 1064 nm, is demonstrated. The MOPO is based on quasi-phase-matched parametric interaction of counter-propagating photons in 1-mm-thick periodically poled Rb-doped KTiOPO4 crystal with a period of 755 nm. It generates a co-propagating signal at 1740 nm and a counter-propagating idler at 2741 nm, achieving mJ-level output with a total signal-and-idler conversion efficiency of 47%. Both generated waves present narrow spectral bandwidths, thanks to the unique properties of the counter-propagating nonlinear interaction. The high conversion efficiency, inherently narrow spectral width, and simplicity of the optical setup make the MOPO an attractive alternative to conventional co-propagating optical parametric oscillators.