Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 30
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Am Chem Soc ; 146(17): 12063-12073, 2024 May 01.
Artigo em Inglês | MEDLINE | ID: mdl-38635332

RESUMO

Two-dimensional conductive metal-organic frameworks have emerged as promising electronic materials for applications in (opto)electronic, thermoelectric, magnetic, electrocatalytic, and energy storage devices. Many bottom-up or postsynthetic protocols have been developed to isolate these materials or further modulate their electronic properties. However, some methodologies commonly used in classic semiconductors, notably, aliovalent substitution, are conspicuously absent. Here, we demonstrate how aliovalent Fe(III) to Ni(II) substitution enables the isolation of a Ni bis(dithiolene) material from a previously reported Fe analogue. Detailed characterization supports the idea that aliovalent substitution of Fe(III) to Ni(II) results in an in situ oxidation of the organic dithiolene linker. This substitution-induced redox tuning modulates the electronic properties in the system, leading to higher electrical conductivity and Hall mobility but slightly lower carrier densities and weaker antiferromagnetic interactions. Moreover, this aliovalent substitution improves the material's electrochemical stability and thus enables pseudocapacitive behavior in the Ni material. These results demonstrate how classic aliovalent substitution strategies in semiconductors can also be leveraged in conductive MOFs and add further support to this class of compounds as emerging electronic materials.

2.
Science ; 383(6682): 545-551, 2024 Feb 02.
Artigo em Inglês | MEDLINE | ID: mdl-38300995

RESUMO

Pluripotency, which is defined as a system not fixed as to its developmental potentialities, is typically associated with biology and stem cells. Inspired by this concept, we report synthetic polymers that act as a single "pluripotent" feedstock and can be differentiated into a range of materials that exhibit different mechanical properties, from hard and brittle to soft and extensible. To achieve this, we have exploited dynamic covalent networks that contain labile, dynamic thia-Michael bonds, whose extent of bonding can be thermally modulated and retained through tempering, akin to the process used in metallurgy. In addition, we show that the shape memory behavior of these materials can be tailored through tempering and that these materials can be patterned to spatially control mechanical properties.

3.
Macromolecules ; 56(19): 8069-8079, 2023 Oct 10.
Artigo em Inglês | MEDLINE | ID: mdl-37841534

RESUMO

Emerging solid polymer electrolyte (SPE) designs for efficient Li-ion (Li+) conduction have relied on polarity and mobility contrast to improve conductivity. To further develop this concept, we employ simulations to examine Li+ solvation and transport in poly(oligo ethylene methacrylate) (POEM) and its copolymers with poly(glycerol carbonate methacrylate) (PGCMA). We find that Li+ is solvated by ether oxygens instead of the highly polar PGCMA, due to lower entropic penalties. The presence of PGCMA promotes single-chain solvation, thereby suppressing interchain Li+ hopping. The conductivity difference between random copolymer PGCMA-r-POEM and block copolymer PGCMA-b-POEM is explained in terms of a hybrid solvation site mechanism. With diffuse microscopic interfaces between domains, PGCMA near the POEM contributes to Li+ transport by forming hybrid solvation sites. The formation of such sites is hindered when PGCMA is locally concentrated. These findings help explain how thermodynamic driving forces govern Li+ solvation and transport in mixed SPEs.

4.
J Am Chem Soc ; 2023 Apr 05.
Artigo em Inglês | MEDLINE | ID: mdl-37018716

RESUMO

Two-dimensional (2D) inorganic materials have emerged as exciting platforms for (opto)electronic, thermoelectric, magnetic, and energy storage applications. However, electronic redox tuning of these materials can be difficult. Instead, 2D metal-organic frameworks (MOFs) offer the possibility of electronic tuning through stoichiometric redox changes, with several examples featuring one to two redox events per formula unit. Here, we demonstrate that this principle can be extended over a far greater span with the isolation of four discrete redox states in the 2D MOFs LixFe3(THT)2 (x = 0-3, THT = triphenylenehexathiol). This redox modulation results in 10,000-fold greater conductivity, p- to n-type carrier switching, and modulation of antiferromagnetic coupling. Physical characterization suggests that changes in carrier density drive these trends with relatively constant charge transport activation energies and mobilities. This series illustrates that 2D MOFs are uniquely redox flexible, making them an ideal materials platform for tunable and switchable applications.

5.
ACS Nano ; 16(12): 20714-20729, 2022 Dec 27.
Artigo em Inglês | MEDLINE | ID: mdl-36475656

RESUMO

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains 2,5-bis(thien-2-yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ion-conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscopy, temperature-dependent wide-angle X-ray scattering, and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion-conducting salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li+]/[EO] = 0.1. The highest ionic conductivity of 8 × 10-3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly of ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

6.
J Am Chem Soc ; 144(41): 19026-19037, 2022 Oct 19.
Artigo em Inglês | MEDLINE | ID: mdl-36194683

RESUMO

Photothermoelectric (PTE) materials are promising candidates for solar energy harvesting and photodetection applications, especially for near-infrared (NIR) wavelengths. Although the processability and tunability of organic materials are highly advantageous, examples of organic PTE materials are comparatively rare and their PTE performance is typically limited by poor photothermal (PT) conversion. Here, we report the use of redox-active Sn complexes of tetrathiafulvalene-tetrathiolate (TTFtt) as transmetalating agents for the synthesis of presynthetically redox tuned NiTTFtt materials. Unlike the neutral material NiTTFtt, which exhibits n-type glassy-metallic conductivity, the reduced materials Li1.2Ni0.4[NiTTFtt] and [Li(THF)1.5]1.2Ni0.4[NiTTFtt] (THF = tetrahydrofuran) display physical characteristics more consistent with p-type semiconductors. The broad spectral absorption and electrically conducting nature of these TTFtt-based materials enable highly efficient NIR-thermal conversion and good PTE performance. Furthermore, in contrast to conventional PTE composites, these NiTTFtt coordination polymers are notable as single-component PTE materials. The presynthetically tuned metal-to-insulator transition in these NiTTFtt systems directly modulates their PT and PTE properties.

7.
Nature ; 611(7936): 479-484, 2022 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-36289346

RESUMO

Conducting organic materials, such as doped organic polymers1, molecular conductors2,3 and emerging coordination polymers4, underpin technologies ranging from displays to flexible electronics5. Realizing high electrical conductivity in traditionally insulating organic materials necessitates tuning their electronic structure through chemical doping6. Furthermore, even organic materials that are intrinsically conductive, such as single-component molecular conductors7,8, require crystallinity for metallic behaviour. However, conducting polymers are often amorphous to aid durability and processability9. Using molecular design to produce high conductivity in undoped amorphous materials would enable tunable and robust conductivity in many applications10, but there are no intrinsically conducting organic materials that maintain high conductivity when disordered. Here we report an amorphous coordination polymer, Ni tetrathiafulvalene tetrathiolate, which displays markedly high electronic conductivity (up to 1,200 S cm-1) and intrinsic glassy-metallic behaviour. Theory shows that these properties are enabled by molecular overlap that is robust to structural perturbations. This unusual set of features results in high conductivity that is stable to humid air for weeks, pH 0-14 and temperatures up to 140 °C. These findings demonstrate that molecular design can enable metallic conductivity even in heavily disordered materials, raising fundamental questions about how metallic transport can exist without periodic structure and indicating exciting new applications for these materials.

8.
ACS Polym Au ; 2(4): 275-286, 2022 Aug 10.
Artigo em Inglês | MEDLINE | ID: mdl-36855565

RESUMO

Polymeric mixed ionic-electronic conductors (MIECs) are of broad interest in the field of energy storage and conversion, optoelectronics, and bioelectronics. A class of polymeric MIECs are conjugated polyelectrolytes (CPEs), which possess a π-conjugated backbone imparting electronic transport characteristics along with side chains composed of a pendant ionic group to allow for ionic transport. Here, our study focuses on the humidity-dependent structure-transport properties of poly[3-(potassium-n-alkanoate) thiophene-2,5-diyl] (P3KnT) CPEs with varied side-chain lengths of n = 4-7. UV-vis spectroscopy along with electronic paramagnetic resonance (EPR) spectroscopy reveals that the infiltration of water leads to a hydrated, self-doped state that allows for electronic transport. The resulting humidity-dependent ionic conductivity (σi) of the thin films shows a monotonic increase with relative humidity (RH) while electronic conductivity (σe) follows a non-monotonic profile. The values of σe continue to rise with increasing RH reaching a local maximum after which σe begins to decrease. P3KnTs with higher n values demonstrate greater resiliency to increasing RH before suffering a decrease in σe. This drop in σe is attributed to two factors. First, disruption of the locally ordered π-stacked domains observed through in situ humidity-dependent grazing incidence wide-angle X-ray scattering (GIWAXS) experiments can account for some of the decrease in σe. A second and more dominant factor is attributed to the swelling of the amorphous domains where electronic transport pathways connecting ordered domains are impeded. P3K7T is most resilient to swelling (based on ellipsometry and water uptake measurements) where sufficient hydration allows for high σi (1.0 × 10-1 S/cm at 95% RH) while not substantially disrupting σe (1.7 × 10-2 S/cm at 85% RH and 8.0 × 10-3 S/cm at 95% RH). Overall, our study highlights the complexity of balancing electronic and ionic transport in hydrated CPEs.

9.
J Am Chem Soc ; 143(8): 3180-3190, 2021 Mar 03.
Artigo em Inglês | MEDLINE | ID: mdl-33615794

RESUMO

Block copolymer electrolytes (BCE) such as polystyrene-block-poly(ethylene oxide) (SEO) blended with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and composed of mechanically robust insulating and rubbery conducting nanodomains are promising solid-state electrolytes for Li batteries. Here, we compare ionic solvation, association, distribution, and conductivity in SEO-LiTFSI BCEs and their homopolymer PEO-LiTFSI analogs toward a fundamental understanding of the maximum in conductivity and transport mechanisms as a function of salt concentration. Ionic conductivity measurements reveal that SEO-LiTFSI and PEO-LiTFSI exhibit similar behaviors up to a Li/EO ratio of 1/12, where roughly half of the available solvation sites in the system are filled, and conductivity is maximized. As the Li/EO ratios increase to 1/5 the conductivity, of the PEO-LiTFSI drops nearly 3-fold, while the conductivity of SEO-LiTFSI remains constant. FTIR spectroscopy reveals that additional Li cations in the homopolymer electrolyte are complexed by additional EO units when the Li/EO ratio exceeds 1/12, while in the BCE, the proportion of complexed and uncomplexed EO units remains constant; Raman spectroscopy data at the same concentrations show that Li cations in the SEO-LiTFSI samples tend to coordinate more to their counteranions. Atomistic-scale molecular dynamics simulations corroborate these results and further show that associated ions tend to segregate to the SEO-LiTFSI domain interfaces. The opportunity for "excess" salt to be sequestered at BCE interfaces results in the retention of an optimum ratio of uncompleted and complexed PEO solvation sites in the middle of the conductive nanodomains of the BCE and maximized conductivity over a broad range of salt concentrations.

10.
ACS Macro Lett ; 10(1): 141-153, 2021 Jan 19.
Artigo em Inglês | MEDLINE | ID: mdl-35548996

RESUMO

Solid polymer electrolytes (SPEs) are an important class of ion-transporting materials for enabling safe and high-energy-density all-solid lithium batteries. Within the composite cathode electrode (CCE), an SPE plays a critical role as both binder material for mechanical integrity and electrolyte to facilitate ion transport. The inclusion of an SPE within the CCE leads to the formation of distinctive heterogeneous SPE/solid interfaces that are not present in traditional liquid electrolyte-containing CCE. Here, the viewpoint emphasizes the importance of understanding the interfacial behavior of SPEs in all-solid CCEs. Challenges and opportunities are highlighted in achieving and maintaining good interfacial contact, and the role of interfacial dynamics and nanoconfinement on ion transport. Additionally, routes to achieving high-voltage electrochemical stability through stabilization of interfaces and the development of SPEs with inherently higher oxidative stability are discussed. SPEs with high-voltage stability will provide a pathway to using cathode active materials operating at 4.5 V versus Li/Li+ and beyond, which are essential to attaining next-generation higher-energy batteries. Overall, the viewpoint clarifies the importance of targeted research and development of SPEs for enabling all-solid CCEs for lithium batteries.

11.
ACS Macro Lett ; 10(12): 1637-1642, 2021 12 21.
Artigo em Inglês | MEDLINE | ID: mdl-35549126

RESUMO

Cross-linking poly(glycidyl methacrylate) microparticles with redox-responsive bis(5-amino-l,3,4-thiadiazol-2-yl) disulfide moieties yield redox-active particles (RAPs) capable of electrochemical energy storage via a reversible 2-electron reduction of the disulfide bond. The resulting RAPs show improved electrochemical reversibility compared to a small-molecule disulfide analogue in solution, attributed to spatial confinement of the polymer-grafted disulfides in the particle. Galvanostatic cycling was used to investigate the impact of electrolyte selection on stability and specific capacity. A dimethyl sulfoxide/magnesium triflate electrolyte was ultimately selected for its favorable electrochemical reversibility and specific capacity. Additionally, the specific capacity showed a strong dependence on particle size where smaller particles yielded higher specific capacity. Overall, these experiments offer a promising direction in designing synthetically facile and electrochemically stable materials for organosulfur-based multielectron energy storage coupled with beyond Li ion systems such as Mg.


Assuntos
Dissulfetos , Polímeros , Dissulfetos/química , Liberação Controlada de Fármacos , Oxirredução , Tamanho da Partícula
12.
ACS Appl Mater Interfaces ; 12(48): 54083-54093, 2020 Dec 02.
Artigo em Inglês | MEDLINE | ID: mdl-33201676

RESUMO

Mechanically robust, thermoresponsive, ion-conducting nanocomposite films are prepared from poly(2-phenylethyl methacrylate)-grafted cellulose nanocrystals (MxG-CNC-g-PPMA). One-component nanocomposite films of the polymer-grafted nanoparticle (PGN) MxG-CNC-g-PPMA are imbibed with 30 wt % imidazolium-based ionic liquid to produce flexible ion-conducting films. These films with 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[H]) not only display remarkable improvements in toughness (>25 times) and tensile strength (>70 times) relative to the corresponding films consisting of the ionic liquid imbibed in the two-component CNC/PPMA nanocomposite but also show higher ionic conductivity than the corresponding neat PPMA with the same weight percent of ionic liquid. Notably, the one-component film containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[E]) exhibits temperature-responsive ionic conduction. The ionic conductivity decreases at around 60 °C as a consequence of the lower critical solution temperature phase transition of the grafted polymer in the ionic liquid, which leads to phase separation. Moreover, holding the MxG-CNC-g-PPMA/[E] film at room temperature for 24 h returns the film to its original homogenous state. These materials exhibit properties relevant to thermal cutoff safety devices (e.g., thermal fuse) where a reduction in conductivity above a critical temperature is needed.

13.
ACS Nano ; 14(7): 8902-8914, 2020 Jul 28.
Artigo em Inglês | MEDLINE | ID: mdl-32496776

RESUMO

Knowledge of intrinsic properties is of central importance for materials design and assessing suitability for specific applications. Self-assembling block copolymer electrolytes (BCEs) are of great interest for applications in solid-state energy storage devices. A fundamental understanding of ion transport properties, however, is hindered by the difficulty in deconvoluting extrinsic factors, such as defects, from intrinsic factors, such as the presence of interfaces between the domains. Here, we quantify the intrinsic ion transport properties of a model BCE system consisting of poly(styrene-block-ethylene oxide) (SEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt using a generalizable strategy of depositing thin films on interdigitated electrodes and self-assembling fully connected parallel lamellar structures throughout the films. Comparison between conductivity in homopolymer poly(ethylene oxide) (PEO)-LiTFSI electrolytes and the analogous conducting material in SEO over a range of salt concentrations (r, molar ratio of lithium ion to ethylene oxide repeat units) and temperatures reveals that between 20% and 50% of the PEO in SEO is inactive. Using mean-field theory calculations of the domain structure and monomer concentration profiles at domain interfaces-both of which vary substantially with salt concentration-the fraction of inactive PEO in the SEO, as derived from conductivity measurements, can be quantitatively reconciled with the fraction of PEO that is mixed with greater than a few volume percent of polystyrene. Despite the detrimental interfacial effects for ion transport in BCEs, the intrinsic conductivity of the SEO studied here (ca. 10-3 S/cm at 90 °C, r = 0.085) is an order of magnitude higher than reported values from bulk samples of similar molecular weight SEO (ca. 10-4 S/cm at 90 °C, r = 0.085). Overall, this work provides motivation and methods for pursuing improved BCE chemical design, interfacial engineering, and processing.

14.
ACS Macro Lett ; 9(4): 500-506, 2020 Apr 21.
Artigo em Inglês | MEDLINE | ID: mdl-35648505

RESUMO

Cross-linked polymer electrolytes containing structurally dynamic disulfide bonds have been synthesized to investigate their combined ion transport and adhesive properties. Dynamic network polymers of varying cross-link densities are synthesized via thiol oxidation of a bisthiol monomer, 2,2'-(ethylenedioxy)diethanethiol, and tetrathiol cross-linker, pentaerythritol tetrakis(3-mercaptopropionate). At optimal loading of lithium bis(trifluoromethane-sulfonyl-imide) (LiTFSI) salt, the ionic conductivities (σ) at 90 °C are about 1 × 10-4 and 1 × 10-5 S/cm at the lowest and highest cross-linking, respectively. Notably, in comparison to the equivalent nondynamic network, the dynamic network shows a positive deviation in σ above 90 °C, which suggests the enhancement of ion transport occurs from the difference in structural relaxation on account of the dissociation of disulfide bonds. Lap shear adhesion and conductivity tests on ITO-coated glass substrates reveal the dynamic network exhibits a higher adhesive shear strength of 0.2 MPa (vs 0.03 MPa for the nondynamic network) and higher σ after the application of external stimulus (UV light or heat). The adhesive strength and σ are stable over multiple debonding/rebonding cycles and, thus, demonstrating the utility of these structurally dynamic networks as solid polymer electrolyte adhesives.

15.
ACS Macro Lett ; 9(3): 295-300, 2020 Mar 17.
Artigo em Inglês | MEDLINE | ID: mdl-35648538

RESUMO

This work represents a joint computational and experimental study on a series of n-ethylene glycol (PEOn)-terminated quaterthiophene (4T) oligomers for 1 < n < 10 to elucidate their self-assembly behavior into a smectic-like lamellar phase. This study builds on an earlier study for n = 4 that showed that our model predictions were consistent with experimental data on the melting behavior and structure of the lamellar phase, with the latter consisting of crystal-like 4T domains and liquid-like PEO4 domains. The present study aims to understand how the length of the terminal PEOn chains modulates the disordering temperature of the lamellar phase and hence the relative stability of the ordered structure. A simplified bilayer model, where the 4T domains are not explicitly described, is put forward to efficiently estimate the disordering effect of the PEO domains with increasing n; this method is first validated by correctly predicting that layers of alkyl (PE)-capped 4T oligomers (for 1 < n < 10) stay ordered at room temperature. Both 4T-domain implicit and explicit model simulations reveal that the order-disorder temperature decreases with the length of the PEO capping chains, as the associated increase in conformational entropy drives a tendency toward disorder that overtakes the cohesive energy, keeping the ordered packing of the 4T domains.

16.
ACS Nano ; 13(7): 7665-7675, 2019 Jul 23.
Artigo em Inglês | MEDLINE | ID: mdl-31194507

RESUMO

Developing soft materials with both ion and electron transport functionalities is of broad interest for energy-storage and bioelectronics applications. Rational design of these materials requires a fundamental understanding of interactions between ion and electron conducting blocks along with the correlation between the microstructure and the conduction characteristics. Here, we investigate the structure and mixed ionic/electronic conduction in thin films of a liquid crystal (LC) 4T/PEO4, which consists of an electronically conducting quarterthiophene (4T) block terminated at both ends by ionically conducting oligoethylenoxide (PEO4) blocks. Using a combined experimental and simulation approach, 4T/PEO4 is shown to self-assemble into smectic, ordered, or disordered phases upon blending the materials with the ionic dopant bis(trifluoromethane)sulfonimide lithium (LiTFSI) under different LiTFSI concentrations. Interestingly, at intermediate LiTFSI concentration, ordered 4T/PEO4 exhibits an electronic conductivity as high as 3.1 × 10-3 S/cm upon being infiltrated with vapor of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) molecular dopant while still maintaining its ionic conducting functionality. This electronic conductivity is superior by an order of magnitude to the previously reported electronic conductivity of vapor co-deposited 4T/F4TCNQ blends. Our findings demonstrate that structure and electronic transport in mixed conduction materials could be modulated by the presence of the ion transporting component and will have important implications for other more complex mixed ionic/electronic conductors.

17.
Sci Adv ; 3(6): e1700434, 2017 06.
Artigo em Inglês | MEDLINE | ID: mdl-28630931

RESUMO

The electrical performance of doped semiconducting polymers is strongly governed by processing methods and underlying thin-film microstructure. We report on the influence of different doping methods (solution versus vapor) on the thermoelectric power factor (PF) of PBTTT molecularly p-doped with F n TCNQ (n = 2 or 4). The vapor-doped films have more than two orders of magnitude higher electronic conductivity (σ) relative to solution-doped films. On the basis of resonant soft x-ray scattering, vapor-doped samples are shown to have a large orientational correlation length (OCL) (that is, length scale of aligned backbones) that correlates to a high apparent charge carrier mobility (µ). The Seebeck coefficient (α) is largely independent of OCL. This reveals that, unlike σ, leveraging strategies to improve µ have a smaller impact on α. Our best-performing sample with the largest OCL, vapor-doped PBTTT:F4TCNQ thin film, has a σ of 670 S/cm and an α of 42 µV/K, which translates to a large PF of 120 µW m-1 K-2. In addition, despite the unfavorable offset for charge transfer, doping by F2TCNQ also leads to a large PF of 70 µW m-1 K-2, which reveals the potential utility of weak molecular dopants. Overall, our work introduces important general processing guidelines for the continued development of doped semiconducting polymers for thermoelectrics.

18.
Nano Lett ; 16(1): 314-9, 2016 Jan 13.
Artigo em Inglês | MEDLINE | ID: mdl-26645364

RESUMO

We report the controlled nanomorphology of semiconducting polymers on chemically and mechanically stable nanogrooved polymer substrates. By employing silicon dioxide thin films with finely adjusted thicknesses on nanogrooved polymer substrates, semiconducting polymer thin films oriented and aligned along the nanogrooves were obtained. Organic field-effect transistors (OFETs) fabricated from the oriented semiconducting polymer, poly[4-(4,4-dihexadecyl-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]thiadiazolo-[3,4-c]pyridine] (PCDTPT), yielded saturation hole mobilities as high as 19.3 cm(2) V(-1 )s(-1), and the flexible "plastic" transistors demonstrated excellent mechanical stability under various bending conditions. These results represent important progress for solution-processed flexible OFETs and demonstrate that directed self-assembly of semiconducting polymers can be achieved by soft nanostructures.

19.
Chem Sci ; 7(3): 1914-1919, 2016 Mar 01.
Artigo em Inglês | MEDLINE | ID: mdl-29899915

RESUMO

A scarcity of stable n-type doping strategies compatible with facile processing has been a major impediment to the advancement of organic electronic devices. Localizing dopants near the cores of conductive molecules can lead to improved efficacy of doping. We and others recently showed the effectiveness of tethering dopants covalently to an electron-deficient aromatic molecule using trimethylammonium functionalization with hydroxide counterions linked to a perylene diimide core by alkyl spacers. In this work, we demonstrate that, contrary to previous hypotheses, the main driver responsible for the highly effective doping observed in thin films is the formation of tethered tertiary amine moieties during thin film processing. Furthermore, we demonstrate that tethered tertiary amine groups are powerful and general n-doping motifs for the successful generation of free electron carriers in the solid-state, not only when coupled to the perylene diimide molecular core, but also when linked with other small molecule systems including naphthalene diimide, diketopyrrolopyrrole, and fullerene derivatives. Our findings help expand a promising molecular design strategy for future enhancements of n-type organic electronic materials.

20.
ACS Macro Lett ; 5(4): 455-459, 2016 Apr 19.
Artigo em Inglês | MEDLINE | ID: mdl-35607236

RESUMO

Conductive polymers such as PEDOT:PSS hold great promise as flexible thermoelectric devices. The thermoelectric power factor of PEDOT:PSS is small relative to inorganic materials because the Seebeck coefficient is small. Ion conducting materials have previously been demonstrated to have very large Seebeck coefficients, and a major advantage of polymers over inorganics is the high room temperature ionic conductivity. Notably, PEDOT:PSS demonstrates a significant but short-term increase in Seebeck coefficient which is attributed to a large ionic Seebeck contribution. By controlling whether electrochemistry occurs at the PEDOT:PSS/electrode interface, the duration of the ionic Seebeck enhancement can be controlled, and a material can be designed with long-lived ionic Seebeck enhancements.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...