Enhanced O2/N2 separation by QuaternizedMatrimid/Multiwalled carbon nanotube mixed-matrix membrane.

The air separation (O2/N2) based on polymeric membranes is critical because it is more energy efficient than traditional methods. Dense polymeric membranes are now the main stay of industrial processes that generate oxygen and nitrogen enriched gas. Though, regular polymeric membranes often fall short of selective pressure demands because O2 and N2 gases have such comparable equivalent diameters. While polymer composites have their benefits, nanocomposite (NCs) allows for the production of high-performance barriers. Utilising Matrimid® 5218 (Matrimid) as the base framework and multiwall carbon nanotube (MWCNT) as the filler, a novel NCs for O2/N2 separation was developed. Both matrimid and MWCNTs were chemically modified quaternization and functionalizing the MWCNTs. The membranes were casted using solution casting with a combination of quaternized matrimid and functionalized multi-walled carbon nanotubes (f-MWCNT). When f-MWCNT was added to quaternized matrimid, it created interfacial compatibility, which increased O2/N2 selectivity and permeability by 65 % and 35 %, respectively. In the current study, increasing O2 diffusivity and O2/N2 solubility selectivity resulted in improved performance, this paves a way for manufacturing innovation.

An Experimental and Simulation Study of the Active Camber Morphing Concept on Airfoils Using Bio-Inspired Structures.

Birds are capable of morphing their wings across different flight modes and speeds to improve their aerodynamic performance. In light of this, the study aims to investigate a more optimized solution compared to conventional structural wing designs. The design challenges faced by the aviation industry today require innovative techniques to improve flight efficiency and minimize environmental impact. This study focuses on the aeroelastic impact validation of wing trailing edge morphing, which undergoes significant structural changes to enhance performance as per mission requirements. The approach to design-concept, modeling, and construction described in this study is generalizable and requires lightweight and actively deformable structures. The objective of this work is to demonstrate the aerodynamic efficiency of an innovative structural design and trailing edge morphing concept compared to conventional wing-flap configurations. The analysis revealed that the maximum displacement at a 30-degree deflection is 47.45 mm, while the maximum stress is 21 MPa. Considering that the yield strength of ABS material is 41.14 MPa, this kerf morphing structure, with a safety factor of 2.5, can withstand both structural and aerodynamic loads. The analysis results of the flap and morph configurations showed a 27% efficiency improvement, which was confirmed through the convergence criteria in ANSYS CFX.

Functional Properties of Grapefruit Seed Extract Embedded Blend Membranes of Poly(vinyl alcohol)/Starch: Potential Application for Antiviral Activity in Food Safety to Fight Against COVID-19.

The poly(vinyl alcohol) (PVA) and starch-based polymeric films with a ratio of 2:8 were prepared using solution casting followed by a solvent evaporation method. Four types of membranes with varied concentrations of grapefruit seed extract (GSE) i.e., 2.5-10 wt% was incorporated in the films. The prepared membranes were assessed for transparency test, mechanical properties, surface morphology, permeability test for O2, and antimicrobial properties. The PVA/starch-10% GSE loaded film showed excellent mechanical properties showing highest 1344 ± 0.7% elongation at break but poor optical transparency with 53.8% to 68.61%. The Scanning Electron Microscopic study reveals the good compatibility between the PVA, Starch, and GSE. The gas permeability test reveals that the prepared films have shown good resistance to the O2 permeability 0.0326-0.316 Barrer at 20 kg/cm2 feed pressure for the prepared membranes showing excellent performance. By adding the little amount of GSE into the PVA/starch blend membranes showed promising antimicrobial efficacy against MNV-1. For 4 h. incubation, PVA/starch blend membranes containing 2.5%, 5%, and 10% GSE caused MNV-1 reductions of 0.92, 1.89, and 2.27 log PFU/ml, respectively. Similarly, after 24 h, the 5% and 10% GSE membranes reduced MNV-1 titers by 1.90 and 3.26 log PFU/ml, respectively. Antimicrobial tests have shown excellent performance to resist microorganisms. The water uptake capacity of the membrane is found 72% for the PVA/starch pristine membrane and is reduced to 32% for the 10% GSE embedded membrane. Since the current pandemic situation due to COVID-19 occurred by SARSCOV2, the prepared GSE incorporated polymeric blend films are the rays of hope in the packaging of food stuff.

Biomimicking Nature-Inspired Design Structures-An Experimental and Simulation Approach Using Additive Manufacturing.

Whether it is a plant- or animal-based bio-inspiration design, it has always been able to address one or more product/component optimisation issues. Today's scientists or engineers look to nature for an optimal, economically viable, long-term solution. Similarly, a proposal is made in this current work to use seven different bio-inspired structures for automotive impact resistance. All seven of these structures are derived from plant and animal species and are intended to be tested for compressive loading to achieve load-bearing capacity. The work may even cater to optimisation techniques to solve the real-time problem using algorithm-based generative shape designs built using CATIA V6 in unit dimension. The samples were optimised with Rhino 7 software and then simulated with ANSYS workbench. To carry out the comparative study, an experimental work of bioprinting in fused deposition modelling (3D printing) was carried out. The goal is to compare the results across all formats and choose the best-performing concept. The results were obtained for compressive load, flexural load, and fatigue load conditions, particularly the number of life cycles, safety factor, damage tolerance, and bi-axiality indicator. When compared to previous research, the results are in good agreement. Because of their multifunctional properties combining soft and high stiffness and lightweight properties of novel materials, novel materials have many potential applications in the medical, aerospace, and automotive sectors.

Experimental and Computational Study of Mechanical and Thermal Characteristics of h-BN and GNP Infused Polymer Composites for Elevated Temperature Applications.

Polymer-based nanocomposites are being considered as replacements for conventional materials in medium to high-temperature applications. This article aims to discover the synergistic effects of reinforcements on the developed polymer-based nanocomposite. An epoxy-based polymer composite was manufactured by reinforcing graphene nanoplatelets (GNP) and h-boron nitride (h-BN) nanofillers. The composites were prepared by varying the reinforcements with the step of 0.1 from 0.1 to 0.6%. Ultrasonication was carried out to ensure the homogenous dispersion of reinforcements. Mechanical, thermal, functional, and scanning electron microscopy (SEM) analysis was carried out on the novel manufactured composites. The evaluation revealed that the polymer composite with GNP 0.2 by wt % has shown an increase in load-bearing capacity by 265% and flexural strength by 165% compared with the pristine form, and the polymer composite with GNP and h-BN 0.6 by wt % showed an increase in load-bearing capacity by 219% and flexural strength by 114% when compared with the pristine form. Furthermore, the evaluation showed that the novel prepared nanocomposite reinforced with GNP and h-BN withstands a higher temperature, around 340 °C, which is validated by thermogravimetric analysis (TGA) trials. The numerical simulation model is implemented to gather the synthesised nanocomposite's best composition and mechanical properties. The minor error between the simulation and experimental data endorses the model's validity. To demonstrate the industrial applicability of the presented material, a case study is proposed to predict the temperature range for compressor blades of gas turbine engines containing nanocomposite material as the substrate and graphene/h-BN as reinforcement particles.

Synthesis and Characterization of Microwave-Assisted Copolymer Membranes of Poly(vinyl alcohol)-g-starch-methacrylate and Their Evaluation for Gas Transport Properties.

Poly(vinyl alcohol) (PVA) is an excellent membrane-forming polymer and can be modified with potato starch and methyl acrylate monomers to obtain copolymers with improved physical and chemical properties. The study presents the synthesis of poly(vinyl alcohol)-g-starch-poly(methyl acrylate) PVA-g-St-g-PMA copolymers using microwave irradiation technique and potassium persulfate initiator. Solution casting and solvent evaporation methods were adopted for the fabrication of polyvinyl alcohol-g-starch-acrylamide composite membranes. The synthesized graft copolymer was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermal analysis. The modified nanocomposite membranes were showed very promising results with the parameters permeability and selectivity. The nanocomposite membranes exhibited the advantages of easy handling and reuse.

Sol-Gel Co-Precipitation Synthesis, Anticoagulant and Anti-Platelet Activities of Copper-Doped Nickel Manganite Nanoparticles.

Copper-substituted nickel manganites Ni(1-x)CuxMn2O4 (Ni-TCE-NPs) were produced by co-precipitation route (sol-gel) at room temperature. Ni(1-x)CuxMn2O4-Bio (NCB) NPs were studied by powder X-ray diffraction technique, scanning electron microscopy and Raman spectroscopy. XRD spectra authenticated the copper-doped nickel manganites' formation with particle size 23-28 nm. A significant decrease in the lattice parameter confirmed the doping of copper ions into the nickel manganites. Microscopy (SEM) was used to estimate the grain size, shape and uniformity, revealing the non-uniform agglomerated polygon and plate-like microstructure. The NCB-NPs showed anticoagulant activity by enhancing the coagulation time of citrated plasma of human beings. NCB-NPs with x = 0.35 and 0.45 have increased clotting time from control 133 ± 4 s to 401 ± 7 s and 3554 ± 80 s, respectively, and others around 134 s. Additionally NCB-NPs with x = 0.35, 0.45 inhibited the platelet aggregation by 80% and 92%, while remaining inhibited with only 30%. NCB-NPs did not show hemolytic activity in RBC cells intimate its non-toxic nature. Finally, NCB-NPs were non-toxic and known to exhibit anti-blood-clotting and antiplatelet activities, which can be used in the field of biomedical applications, especially as antithrombotic agents.

Influence of Solid Lubricant Addition on Friction and Wear Response of 3D Printed Polymer Composites.

In this study, acrylonitrile butadiene styrene (ABS) and graphite powder-a solid lubricant-were filled and characterized for friction and wear responses. The fused deposition modeling (FDM) technique was utilized to synthesize ABS-graphite composites. A twin-screw extrusion approach was employed to create the composite filament of graphite-ABS that is suitable for the FDM process. Three graphite particle ratios ranging from 0% to 5% were explored in the ABS matrix. The wear and friction properties of ABS composites were examined using a pin on disc tribometer at varied sliding velocities and weights. As a result of the graphite addition in the ABS matrix, weight losses for FDM components as well as a decreased coefficient of friction were demonstrated. Furthermore, as the graphite weight percentage in the ABS matrix grows the value of friction and wear loss decreases. The wear mechanisms in graphite filled ABS composites and ABS were extensively examined using scanning electron microscopy and confocal microscopy.

Mechanical Properties of PC-ABS-Based Graphene-Reinforced Polymer Nanocomposites Fabricated by FDM Process.

This experimental study investigates the mechanical properties of polymer matrix composites containing nanofiller developed by fused deposition modelling (FDM). A novel polymer nanocomposite was developed by amalgamating polycarbonate-acrylonitrile butadiene styrene (PC-ABS) by blending with graphene nanoparticles in the following proportions: 0.2, 0.4, 0.6, and 0.8 wt %. The composite filaments were developed using a twin-screw extrusion method. The mechanical properties such as tensile strength, low-velocity impact strength, and surface roughness of pure PC-ABS and PC-ABS + graphene were compared. It was observed that with the addition of graphene, tensile strength and impact strength improved, and a reduction in surface roughness was observed along the build direction. These properties were analyzed to understand the dispersion of graphene in the PC-ABS matrix and its effects on the parameters of the study. With the 0.8 wt % addition of graphene to PC-ABS, the tensile strength increased by 57%, and the impact resistance increased by 87%. A reduction in surface roughness was noted for every incremental addition of graphene to PC-ABS. The highest decrement was seen for the 0.8 wt % addition of graphene reinforcement that amounted to 40% compared to PC-ABS.

Analysis of the Effect of Parameters on Fracture Toughness of Hemp Fiber Reinforced Hybrid Composites Using the ANOVA Method.

In today's world, global warming has become a concern. To overcome this, we need to reduce the carbon footprints caused by the production of materials. Much of the time, this is equivalent to the same amount of CO2 emissions per tonne of production. This is a serious concern and needs to be overcome by identifying alternative materials to have as minimal a carbon footprint as possible. In this context, hemp fiber is by far the best natural fiber when compared to its peers. As per the survey conducted by the Nova institute, hemp has CO2 emissions of only 360 Kg/tonne, whereas jute has CO2 emissions of 550 Kg/tonne, kenaf 420 Kg/tonne, and flax 350 Kg/tonne. This paper presents an experimental study of the fracture toughness of hemp-reinforced hybrid composites (HRHC). The effect of the parameters on the fracture toughness behavior of HRHC is studied using the Taguchi technique. It uses different filler combinations with hemp fiber and epoxy. Hemp fiber is used as the reinforcement, epoxy resin is used as a matrix, and banana fiber, coconut shell powder, and sawdust are used as fillers. The experimental plan is prepared using an orthogonal array and analyzed using Minitab software. The obtained results were analyzed using ANOVA and main effects plots. It was observed that the fracture toughness increases with a decrease in thickness. The fracture toughness is affected by the fiber content in the range of 25%-35% and is also affected by the filler materials.

Investigation of Mechanical and Physical Properties of Big Sheep Horn as an Alternative Biomaterial for Structural Applications.

This paper investigates the physical and mechanical properties of bighorns of Deccani breed sheep native from Karnataka, India. The exhaustive work comprises two cases. First, rehydrated (wet) and ambient (dry) conditions, and second, the horn coupons were selected for longitudinal and lateral (transverse) directions. More than seventy-two samples were subjected to a test for physical and mechanical property extraction. Further, twenty-four samples were subjected to physical property testing, which included density and moisture absorption tests. At the same time, mechanical testing included analysis of the stress state dependence with the horn keratin tested under tension, compression, and flexural loading. The mechanical properties include the elastic modulus, yield strength, ultimate strength, failure strain, compressive strength, flexural strength, flexural modulus, and hardness. The results showed anisotropy and depended highly on the presence of water content more than coupon orientation. Wet conditioned specimens had a significant loss in mechanical properties compared with dry specimens. The observed outcomes were shown at par with results for yield strength of 53.5 ± 6.5 MPa (which is better than its peers) and a maximum compressive stress of 557.7 ± 5 MPa (highest among peers). Young's modulus 6.5 ± 0.5 GPa and a density equivalent to a biopolymer of 1.2 g/cc are expected to be the lightest among its peers; flexural strength 168.75 MPa, with lowest failure strain percentage of 6.5 ± 0.5 and Rockwell hardness value of 60 HRB, seem best in the class of this category. Simulation study identified a suitable application area based on impact and fatigue analysis. Overall, the exhaustive experimental work provided many opportunities to use this new material in various diversified applications in the future.

Nanoceramic Composites for Nuclear Radiation Attenuation.

The development of radiation attenuation materials with lean cross-sections is the need of the hour. However, the inherent threat of radiations accompanying these processes is of major concern. Thus, in an attempt to shield unnecessary radiations, several novel materials have been fabricated alongside the conventional materials available. Yet, there is a need for cost-effective, efficient shielding materials that have good mechanical strength and effective shielding properties. The present work investigates ceramic composite behaviors and radiation shielding capacity reinforced with lead oxide nano-powder. Developed nano-lead-based cement composites were subjected to mechanical tests to determine flexural and compressive strengths to check their suitability for structural applications. Further, the gamma attenuation test of the composites was conducted to determine their neutron absorption capacity. The addition of nano-leadoxide in the control beams was varied from 0.7 to 0.95 and 1 wt.% of the ceramic matrix. The percentage of nano-leadoxide that gives the best results in both enhanced properties and economic aspects was determined to be 0.6 wt.% of the cement.

Prediction of injection molding parameters for symmetric spur gear.

Polymer gears pose major advantages, like noiseless operation, resistive against corrosion, low weight, ability to damp vibrations, ease of manufacturability, and ability to operate without lubrication like in printers, household appliances, etc. In order to enhance mechanical properties of gear materials, various reinforcing materials are added such as glass and carbon fibers. The orientation of these fibers and distribution are critical parameters at the microstructural level for polymer reinforced with short fibers, which defines the strength and life of gears. The geometric accuracy and precision of molded gears are improved by the injection molding technique. The fiber orientation prediction is a new and novel aspect for high performance and life, as these injection-molded gears have complex patterns of fiber orientation. This also affects material properties such as elastic modulus, strength, and gear geometrical dimensional properties shrinkage and warpage. In this present work, an attempt is made to develop 3D symmetric spur gear tooth geometry using Autodesk Fusion 360. The injection molding parameters such as fiber orientation tensor, volumetric shrinkage at ejection, weld lines, deflection, and confidence in filling are studied for modeled gear having symmetric teeth profile for unreinforced and 20%, 30%, 40%, 50%, and 60% glass fiber-reinforced nylon 6/6 (PA66) by using Autodesk Moldflow Adviser 2017. The result obtained from mold simulation tool indicates that fiber orientation tensor for varying glass fiber contents was close to unity. The volumetric shrinkage considerably reduced from unreinforced PA66 to glass-reinforced PA66.Graphical abstract.