Intense Pulsed Light Thermal Treatment of Pb(Zr,Ti)O3 /Metglas Heterostructured Films Resulting in Extreme Magnetoelectric Coupling of over 20 V cm-1 Oe-1.

Magnetoelectric (ME) film composites consisting of piezoelectric and magnetostrictive materials are promising candidates for application in magnetic field sensors, energy harvesters, and ME antennas. Conventionally, high-temperature annealing is required to crystallize piezoelectric films, restricting the use of heat-sensitive magnetostrictive substrates that enhance ME coupling. Herein, a synergetic approach is demonstrated for fabricating ME film composites that combines aerosol deposition and instantaneous thermal treatment based on intense pulsed light (IPL) radiation to form piezoelectric Pb(Zr,Ti)O3 (PZT) thick films on an amorphous Metglas substrate. IPL rapidly anneals PZT films within a few milliseconds without damaging the underlying Metglas. To optimize the IPL irradiation conditions, the temperature distribution inside the PZT/Metglas film is determined using transient photothermal computational simulation. The PZT/Metglas films are annealed using different IPL pulse durations to determine the structure-property relationship. IPL treatment results in an enhanced crystallinity of the PZT, thus improving the dielectric, piezoelectric, and ME properties of the composite films. An ultrahigh off-resonance ME coupling (≈20 V cm-1  Oe-1 ) is obtained for the PZT/Metglas film that is IPL annealed at a pulse width of 0.75 ms (an order of magnitude higher than that reported for other ME films), confirming the potential for next-generation, miniaturized, and high-performance ME devices.

Recent Progress in Devices Based on Magnetoelectric Composite Thin Films.

The strain-driven interfacial coupling between the ferromagnetic and ferroelectric constituents of magnetoelectric (ME) composites makes them potential candidates for novel multifunctional devices. ME composites in the form of thin-film heterostructures show promising applications in miniaturized ME devices. This article reports the recent advancement in ME thin-film devices, such as highly sensitive magnetic field sensors, ME antennas, integrated tunable ME inductors, and ME band-pass filters, is discussed. (Pb1-xZrx)TiO3 (PZT), Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT), Aluminium nitride (AlN), and Al1-xScxN are the most commonly used piezoelectric constituents, whereas FeGa, FeGaB, FeCo, FeCoB, and Metglas (FeCoSiB alloy) are the most commonly used magnetostrictive constituents in the thin film ME devices. The ME field sensors offer a limit of detection in the fT/Hz1/2 range at the mechanical resonance frequency. However, below resonance, different frequency conversion techniques with AC magnetic or electric fields or the delta-E effect are used. Noise floors of 1-100 pT/Hz1/2 at 1 Hz were obtained. Acoustically actuated nanomechanical ME antennas operating at a very-high frequency as well as ultra-high frequency (0.1-3 GHz) range, were introduced. The ME antennas were successfully miniaturized by a few orders smaller in size compared to the state-of-the-art conventional antennas. The designed antennas exhibit potential application in biomedical devices and wearable antennas. Integrated tunable inductors and band-pass filters tuned by electric and magnetic field with a wide operating frequency range are also discussed along with miniaturized ME energy harvesters.

Enhancement of Energy-Harvesting Performance of Magneto-Mechano-Electric Generators through Optimization of the Interfacial Layer.

Among various energy harvester paradigms, the simple cantilever-structured magneto-mechano-electric (MME) energy generator comprises a piezoelectric material laminated on a magnetostrictive metal plate and permanent magnets as proof mass, exhibiting excellent magnetic energy-harvesting performance. The current challenge in using MME energy harvesters is the mechano-electric coupling at the interface between the piezoelectric material and magnetostrictive metal layer, which depends significantly on the mechanical properties of the interfacial adhesive layer. In this study, the effects of four types of adhesive interfacial layers on the output power and environmental and fatigue resistances of MME harvesters are systematically investigated. An optimized MME energy generator with an adhesive interfacial layer of 18.8 µm thickness and elastic modulus of 3.1 GPa achieves colossal enhancement (∼300%) with a maximum output power density of 0.92 mW/cm2, while a 10 Oe (=10 G = 1 mT in air; 60 Hz) magnetic field is applied. In addition, the generator exhibits a robust endurance of continuous 108 fatigue cycles and excellent temperature stability in the range of -30 to 70 °C. The presented MME generator, which harvests stray magnetic energy reliably, is promising as a low-cost and efficient autonomous power source for Internet of Things devices, wireless sensor networks, and so on.

Quantitative Measurements of Size-Dependent Magnetoelectric Coupling in Fe3O4 Nanoparticles.

Bulk magnetite (Fe3O4), the loadstone used in magnetic compasses, has been known to exhibit magnetoelectric (ME) properties below ∼10 K; however, corresponding ME effects in Fe3O4 nanoparticles have been enigmatic. We investigate quantitatively the ME coupling of spherical Fe3O4 nanoparticles with uniform diameters (d) from 3 to 15 nm embedded in an insulating host, using a sensitive ME susceptometer. The intrinsic ME susceptibility (MES) of the Fe3O4 nanoparticles is measured, exhibiting a maximum value of ∼0.6 ps/m at 5 K for d = 15 nm. We found that the MES is reduced with reduced d but remains finite until d = ∼5 nm, which is close to the critical thickness for observing the Verwey transition. Moreover, with reduced diameter the critical temperature below which the MES becomes conspicuous increased systematically from 9.8 K in the bulk to 19.7 K in the nanoparticles with d = 7 nm, reflecting the core-shell effect on the ME properties. These results point to a new pathway for investigating ME effect in various nanomaterials.