Enantiomeric impurities in chiral catalysts, auxiliaries, and synthons used in enantioselective syntheses. Part 5.

The enantiomeric excess of chiral starting materials is one of the important factors determining the enantiopurity of products in asymmetric synthesis. Fifty-one commercially available chiral reagents used as building blocks, catalysts, and auxiliaries in various enantioselective syntheses were assayed for their enantiomeric purity. The test results were classified within five impurities level (ie, <0.01%, 0.01%-0.1%, 0.1%-1%, 1%-10%, >10%). Previously from 1998 to 2013, several reports have been published on the enantiomeric composition of more than 300 chiral reagents. This series of papers is necessitated by the fact that new reagents are forthcoming and that the enantiomeric purity of the same reagent can vary from batch to batch and/or from supplier to supplier. This report presents chiral liquid chromatography (LC) and gas chromatography (GC) methods to separate enantiomers of chiral compounds and evaluate their enantiomeric purities. The accurate and efficient LC analysis was done using newly introduced superficially porous particle (SPP 2.7 µm) based chiral stationary phases (TeicoShell, VancoShell, LarihcShell-P, and NicoShell).

Variation of anionic moieties of dicationic ionic liquid GC stationary phases: Effect on stability and selectivity.

Dicationic ionic liquids (DILs) are more and more accepted as a new class of high temperature and polar stationary phases for gas chromatography (GC). This study deals with the effect of seven different fluorosulfonyl derivatized anions associated with two dications: 1,3-di(3-methylimidazolium)-2-methylpropane [2mC3(mim)2], and 1,3-di(3-methylimidazolium)-isobutene [i-eneC4(mim)2]. Thermophysical properties of the 14 synthesized DILs were evaluated in terms of melting point, viscosity, and thermal stability. The optimal physicochemical properties of 13 DILs allowed preparing 13 GC capillary columns. Accordingly, the polarity and selectivity of the DILs were evaluated by determining the Rohrschneider-McReynolds constants and the equivalent chain lengths of C18 fatty acid methyl esters (FAMEs). The symmetrical fluoroalkylsulfonyl and the trifluorosulfonate anions seem to produce the most polar DILs. Compared to classical polyethyleneglycol phases, the DILs showed substantially decreased retention of apolar compounds and a much stronger retention of the polar ones. Unique selectivities were observed with unsaturated FAMEs, polyaromatic hydrocarbons, and bacterial specific FAMEs. The two applications presented included a biodiesel and bacterial FAME analyses.

Gas chromatography selectivity of new phosphonium-based dicationic ionic liquid stationary phases.

Three phosphonium-based dicationic ionic liquids were synthesized as bis(trifluoromethylsulfonyl) imide salts. The three dications had a nonyl spacer between two identical phosphonium-substituted groups. The three phosphonium moieties were dipropyl(phenyl), diphenyl(propyl), and diphenyl(toluyl). The physicochemical properties of the dicationic ionic liquids were appropriate to prepare 30 m capillary columns that were tested in gas chromatography. A unique selectivity compared to different polysiloxane or polar cyanosiloxane commercial columns was observed for selected mixes of phthalates, polyaromatic hydrocarbons, polychlorobiphenyls, and dioxins. Only minor selectivity variations were observed with the three dicationic ionic liquids. The different number of aromatic rings on the positively charged phosphonium group did not influence the dicationic ionic liquid selectivity significantly.

Correction to: Branched-chain dicationic ionic liquids for fatty acid methyl ester assessment by gas chromatography.

The authors would like to call the reader's attention to the fact that the original publication included some corrections needed to be addressed.

Dicationic ionic liquid thermal decomposition pathways.

The rapid expansion in the study and use of ionic liquids (ILs) is a result of their unique properties including negligible volatility, high thermal stability, and ability to dissolve disparate compounds. However, because ILs have infinitely variable structures (often referred to as "tunability"), these properties can differ considerably. Herein, we focus on the thermal stability of 15 bis-/dicationic ionic liquids. Specifically, their thermal breakdown products are examined to determine the structural linkages, bonds, or atoms most susceptible to thermally induced changes and whether such changes occur before possible volatilization. In most cases, the heteroatom-carbon single bonds were susceptible to thermolytic decomposition. Graphical abstract Capture of dicationic ionic liquid thermal decomposition products for subsequent identification.

Branched-chain dicationic ionic liquids for fatty acid methyl ester assessment by gas chromatography.

Twelve bis- or dicationic ionic liquids (ILs) including eight based on imidazolium, a single one based on phosphonium, and three based on pyrrolidinium cationic units were prepared with the bis(trifluoromethyl sulfonyl) imide anion. The two identical cationic moieties were attached by different alkyl spacers having three or five carbons and differing alkyl substituents attached to the spacer. The SLB-IL111 column, as the most polar commercial stationary phase known, was included in the study for comparison. Isothermal separations of a rapeseed oil fatty acid methyl ester (FAME) sample were used to study and compare the 12 IL-based column performances and selectivities. The retention times of the most retained methyl esters of lignoceric (C24:0) and erucic (C22:1) acids were used to estimate the IL polarity. The phosphonium dicationic IL column was, by far, the least polar. Imidazolium-based dicationic IL columns were the most polar. Polarity and selectivity for the FAME separation were somewhat related. The separation of a 37-FAME standard mixture allowed the investigation of selectivity variations observed on the 12 IL-based columns under temperature gradients up to 230 °C. The remarkable selectivity of the IL-based columns is demonstrated by the detailed analysis of the cis/trans C18:1 isomers of a partially hydrogenated vegetable oil sample on 30-m columns, separations competing with that done following an "official method" performed on a 100-m column. Graphical abstract Separation of fatty acid methyl esters on a 30-m 3m2C5(mpy)2. 2NTf2 branched-chain dicationic IL-based column. Branched chain dicationic ILs show great selectivity for separation of cis/trans, ω-3/ω-6, and detailed analysis of cis/trans fats.

Duloxetine Hydrochloride-Induced Oral Lichenoid Reaction: A Case Report.

OBJECTIVE: To report the first case of duloxetine hydrochloride (DH)-induced oral lichenoid drug reaction (OLDR). CLINICAL PRESENTATION AND INTERVENTION: A 57-year-old male patient presented with painful ulcerative lesions on the bilateral buccal mucosa of 2-year duration. The patient was on multiple drug therapy for his systemic ailments. After thorough evaluation for possible medical ailments and with the physician's consent, withdrawal of DH was done. The oral lesions were resolved after 2 weeks. CONCLUSION: In this case, DH induced OLDR.