HME-assisted formulation of taste-masked dispersible tablets of cefpodoxime proxetil and roxithromycin.

Objectives: Antibiotics are the most commonly administered medications among pediatric patients. However most of the time, accurate dose administration to children becomes a problem due to the extremely bitter taste. Cefpodoxime proxetil (CP) and roxithromycin (ROX) are antibiotics often prescribed to the pediatric population and have a bitter taste. Marketed formulations of these drugs are dry suspension and/or tablets. The lyophilization method involves various steps and thus is time consuming and expensive. The objective of this study was to mask the bitter taste of CP and ROX without compromising the solubility and drug release profile compared to marketed formulations, as well as to overcome the disadvantages associated with the currently used lyophilization technique. Methods: Hot melt extrusion (HME) technology was used to process CP and ROX individually with Eudragit E PO polymer. The extrudates obtained were characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, and differential scanning calorimetry. The powdered extrudates were formulated as dispersible tablets and evaluated for in vitro and in vivo taste-masking efficiency. Results: The tablets prepared in this study showed comparable dissolution profiles but the taste-masking efficiency was significantly enhanced compared to the marketed tablets of CP and ROX. The results of in vivo human taste-masking evaluation were also in agreement with the in vitro taste-masking studies. Conclusion: The current work presents solvent-free, scalable, and continuous HME technology for addressing the bitter taste issues of CP and ROX. The disadvantages associated with the currently used lyophilization technique were overcome by developing the formulations using HME technology.

Fabrication, optimization and characterization of an osmotic push-pull drug delivery system for paliperidone.

Objectives: Paliperidone is a BCS class II drug with low solubility and high permeability. It has 28% absolute oral bioavailability and an elimination half-life of 23 h. An osmotic push-pull trilayer tablet currently available on the market has achieved controlled release of a low dose over an extended time period, while avoiding the need for a loading dose. However, this trilayer tablet has several disadvantages, such as complicated processing, high production costs and difficulty in achieving uniformity of the contents. Thus, the objective of this study was to overcome the above difficulties associated with paliperidone and to formulate a bilayer tablet with a similar drug profile to that of the reference listed drug Invega®. Methods: The bilayer tablets were prepared by optimization of the core and semi-permeable membrane. Effects of the curing time, and the size and number of orifices on the prepared tablets' dissolution profile were analyzed. Two different grades of polyethylene oxide were used in the core and push layer as pore formers. Results: The weight variation, friability and hardness values of the prepared tablets were well within compendium limits. The optimized bilayer parameters for the prepared tablets were curing time, 5 h; seal coat, 7% w/w; ER coat, 13% w/w; orifice size, 0.6 mm; and orifice number, 2. Further tablet formulation resulted in an F2 value of 75.67, indicating a dissolution profile similar to that of Invega®. Conclusion: Bi-layer tablets of paliperidone overcoming the drawbacks of the marketed formulation were successfully prepared, and offer advantages such as a simpler preparation process, cost effectiveness and faster preparation of the tablet core.

Fabrication of electrospun nanofibres of BCS II drug for enhanced dissolution and permeation across skin.

The present work reports preparation of irbesartan (IBS) loaded nanofibre mats using electrospinning technique. The prepared nanofibres were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction analysis, in vitro diffusion and ex vivo skin permeation studies. FTIR studies revealed chemical compatibility of IBS and polyvinyl pyrrolidine (PVP K-30). SEM images confirmed formation of nanofibres wherein IBS existed in amorphous form as revealed by DSC and XRD analyses. The prepared nanofibre mats of IBS were found to be superior to IBS loaded as cast films when analysed for in vitro IBS release and ex vivo skin permeation studies since the flux of IBS loaded nanofibres was 17 times greater than as cast film. The improvement in drug delivery kinetics of IBS loaded nanofibres could be attributed to amorphization with reduction in particle size of IBS, dispersion of IBS at molecular level in PVP matrix and enormous increase in the surface area for IBS release due to nanonization. Thus transdermal patch of IBS loaded nanofibres can be considered as an alternative dosage form in order to improve its biopharmaceutical properties and enhance therapeutic efficacy in hypertension.

Fabrication of novel GMO/Eudragit E100 nanostructures for enhancing oral bioavailability of carvedilol.

In the present work, novel nanostructures comprising of glyceryl monooleate (GMO) and Eudragit E100 were prepared using high intensity ultrasonic homogenization. 3(2) Factorial design approach was used for optimization of nanostructures. Results of regression analysis revealed that the amount of GMO and Eudragit E100 had a drastic effect on particle size and percent entrapment efficiency. Optimized carvedilol-loaded nanostructures (Car-NS) were characterized by FTIR, TEM, DSC, in vitro drug release study. Pharmacokinetic parameters such as Cmax, Tmax, Ke, Ka, Vd and AUC were estimated for Car-NS upon its oral administration in Sprague-Dawley rats. Particle size of Car-NS was found to be 183 ± 2.43 nm with an entrapment efficiency of 81.4 ± 0.512%. FTIR studies revealed loading and chemical compatibility of carvedilol with the components of nanostructures. DSC thermograms did not show endothermic peak for melting of carvedilol which could be attributed to solubilization of carvedilol in molten GMO during DSC run. The prepared Car-NS released carvedilol in sustained manner over a period of 10 h as suggested by in vitro drug release study. The pharmacokinetic study of Car-NS showed significant improvement in Cmax (two fold, p < 0.001) and AUC (four folds, p < 0.001) of carvedilol when compared to carvedilol suspension. Car-NS were found to be stable for a period of 3 months. Thus, a stable, floating, multiparticulate GMO/Eudragit E100 nanostructures having ability to release the drug in sustained manner with enhanced oral bioavailability can prove to be a promising carrier system for poorly water soluble drugs.

Exploring Microstructural Changes in Structural Analogues of Ibuprofen-Hosted In Situ Gelling System and Its Influence on Pharmaceutical Performance.

The present work explores inner structuration of in situ gelling system consisting of glyceryl monooleate (GMO) and oleic acid (OA). The system under study involves investigation of microstructural changes which are believed to govern the pharmaceutical performance of final formulation. The changes which are often termed mesophasic transformation were analysed by small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), rheology and plane polarised light (PPL) microscopy. The current work revealed transformation of blank system from W/O emulsion to reverse hexagonal structure upon addition of structural analogues of ibuprofen. Such transformations are believed to occur due to increased hydrophobic volume within system as probed by SAXS analysis. The findings of SAXS studies were well supported by DSC, rheology and PPL microscopy. The study established inverse relationship between log P value of structural analogues of ibuprofen and the degree of binding of water molecules to surfactant chains. Such relationship had pronounced effect on sol-gel transformation process. The prepared in situ gelling system showed sustained drug release which followed Higuchi model.

Liquid crystalline phase as a probe for crystal engineering of lactose: carrier for pulmonary drug delivery.

The current work was undertaken to assess suitability of liquid crystalline phase for engineering of lactose crystals and their utility as a carrier in dry powder inhalation formulations. Saturated lactose solution was poured in molten glyceryl monooleate which subsequently transformed into gel. The gel microstructure was analyzed by PPL microscopy and SAXS. Lactose particles recovered from gels after 48 h were analyzed for polymorphism using techniques such as FTIR, XRD, DSC and TGA. Particle size, morphology and aerosolisation properties of prepared lactose were analyzed using Anderson cascade impactor. In situ seeding followed by growth of lactose crystals took place in gels with cubic microstructure as revealed by PPL microscopy and SAXS. Elongated (size ∼ 71 µm) lactose particles with smooth surface containing mixture of α and ß-lactose was recovered from gel, however percentage of α-lactose was more as compared to ß-lactose. The aerosolisation parameters such as RD, ED, %FPF and % recovery of lactose recovered from gel (LPL) were found to be comparable to Respitose® ML001. Thus LC phase (cubic) can be used for engineering of lactose crystals so as to obtain particles with smooth surface, high elongation ratio and further they can be used as carrier in DPI formulations.

Probing influence of methodological variation on active loading of acetazolamide into nanoliposomes: biophysical, in vitro, ex vivo, in vivo and rheological investigation.

In the present work comparative evaluation of acetate and pH gradient techniques for effective drug loading in liposomes has been investigated. The acetazolamide (ACZ) loaded liposomes prepared by two methods were analyzed by vesicle size analysis, zeta potential, percent encapsulation efficiency, in vitro drug release studies and intraocular pressure lowering activity. ICH guidelines were followed for determining stability of the prepared liposomes. The superiority of acetate gradient method for active loading of acetazolamide has been established. The prepared acetate gradient positive liposomes showed extended hypotensive effect when compared to other liposomal formulations. Thus ACZ loaded liposomes prepared by acetate gradient technique may serve as promising ocular delivery system in the treatment of glaucoma. The current work emphasizes the fact that the techniques used for active drug loading into liposomes strongly influence the pharmaceutical performance of the final formulation.

Mapping ion-induced mesophasic transformation in lyotropic in situ gelling system and its correlation with pharmaceutical performance.

PURPOSE: To investigate influence of ion induced mesophasic transformation on pharmaceutical performance of in situ gelling system consisting of glyceryl monooleate. METHODS: The prepared system showed mesophasic transformation during its conversion from sol to gel upon controlled hydration. The process of mesophasic transformation was studied by SAXS, DSC, rheology and plane polarized light microscopy. Further the influence of additives i.e. naproxen salts (sodium and potassium) and naproxen (base) on the process of mesophasic transformation was also elucidated. RESULTS: It was observed that addition of salt form of naproxen transformed W/O emulsions into cubic mesophase whereas addition of base form of naproxen formed reverse hexagonal (HII) phase upon controlled hydration. The cubic mesophase formed by naproxen salts retarded the drug release for initial 3 h whereas HII phase showed sustained drug release characteristics for naproxen base following Higuchi drug release kinetics. CONCLUSION: The current work suggests that formulations with tailor made pharmaceutical performance can be developed by selecting proper additives in the system so as to obtain the desired mesophase 'on demand' thereby controlling drug release characteristics.

Rheological investigation and its correlation with permeability coefficient of drug loaded carbopol gel: influence of absorption enhancers.

CONTEXT: The present study was planned to investigate the effect of absorption enhancers on the microstructure of Losartan potassium gel and hence its influence on the diffusion of Losartan potassium across nasal mucosa. METHOD: Losartan potassium loaded carbopol gel (1% w/v) with and without absorption enhancers was prepared. Polyethylene glycol (PEG) 4000 and ethanol were used as absorption enhancers. Microstructural elucidation of prepared gels was done using shear rheology. Ex vivo drug release studies were performed on the prepared gels. RESULTS: It was observed that the absorption enhancers PEG 4000 and ethanol altered the gel microstructure. The prepared gels were viscoelastic in nature suggesting their suitability for topical application. Permeability coefficient of Losartan potassium loaded into gels was found to be inversely proportional to the storage modulus. Thus increase in storage modulus lead to slow drug diffusion. CONCLUSION: The current study emphasizes on the fact that selection of polymeric carrier for nasal drug delivery and/or absorption enhancer strongly influence the microstructure of the gel and hence the pharmaceutical performance of the formulation.

Microstructural elucidation of self-emulsifying system: effect of chemical structure.

PURPOSE: Self-emulsifying systems (SES) emulsify spontaneously to produce fine oil-in-water emulsion when introduced into aqueous phase. The self-emulsification process plays an important role during formation of emulsion. The objective of current work was to understand and explore the inner structuration of SES through controlled hydration and further to study the influence of additive on the same which ultimately governs performance of final formulation in terms of droplet size. METHODS: Droplet size of final formulations containing structural analogues of ibuprofen was determined. Microstructural properties of intermediate hydrated regimes of SES were investigated using techniques such as small angle X-ray scattering, differential scanning calorimetry and rheology. RESULTS: The current work established inverse relationship between droplet size of the formulations containing structural analogues of ibuprofen and their Log P values. Microstructural analysis of intermediate hydrated regimes of the prepared samples showed formation of local lamellar structure. Structural analogues of ibuprofen significantly altered microstructure of lamellae which was well correlated with the droplet size of final formulations. In vitro drug release study showed increase in dissolution rate of lipophillic drugs when formulated as SES. CONCLUSION: The current work emphasizes the fact that tailor-made formulations can be prepared by controlling the properties of intermediate regimes.

Probing influence of mesophasic transformation on performance of self-emulsifying system: effect of ion.

Self-emulsifying systems are mixtures of oils and surfactants, ideally isotropic, sometimes including cosolvents, which emulsify under conditions of gentle agitation, similar to those which would be encountered in the gastrointestinal tract. The process of self-emulsification has remained the center of attraction for most researchers. Controlled hydration of self-emulsifying systems shows formation of an intermediate gel phase which upon rupture forms an emulsion. Current work was undertaken to understand and explore the microstructural properties of intermediate gel phase which are believed to influence the performance (droplet size) of the final formulation. The effect of additives on microstructural properties of intermediate gel phase has also been investigated. Microstructural elucidation of hydrated samples of intermediate regimes was done by using techniques such as small angle X-ray scattering, differential scanning calorimetry and rheology. Samples from intermediate regimes showed formation of local lamellar structure which swelled with hydration. In the present work, the effect of addition of salt form of naproxen (sodium and potassium) and naproxen (base) on microstructural properties of intermediate regimes was investigated. Systems containing naproxen salts formed larger droplets whereas naproxen base formed smaller ones. Microstructural properties of intermediate lamellar structures were well correlated with performance of the final formulation. The current studies indicate that by controlling the properties of intermediate regimes optimized formulations with desired performance can be tailor-made.