Temporal and institutional trends in robotic surgery.

Robotic surgery has become increasingly prevalent in general surgery practice. While previous studies have shown the safety and efficacy of robotic assistance in laparoscopic general surgery procedures, few studies have evaluated the temporal and regional trends in implementation. In our retrospective population-based study, we aim to evaluate the national trends in robotic surgery. National Inpatient Database (NIS 2009-2014) was used to identify adults who underwent robotic assisted surgery (ICD 9 codes 17.41 to 17.49). Robotic procedures related to seven abdominal organ systems were compared against the trends of Urology, Gynaecologic, and Orthopedic robotic procedures. Discharge weights were applied to calculate National temporal trends separated by hospital size, teaching status and US geographic region. 894,163 patients received a robotic assisted procedure between 2009 and 2014 with 64% increase in utilization. The largest percent change was witnessed in biliary robotic procedures with 2984% change in utilization, followed by hernia (1376%). Lowest percent change was witnessed in esophageal procedures with 114% increase. Medium sized hospitals had the largest change in robotic utilization (41%), with large institutions seeing 18% decrease. Gastric procedures were the most common robotic procedure performed at small institutions (7917 total cases; 316%). Large institutions saw an overall decrease in gastric (- 47%), esophageal (- 17%), small and large intestinal (-16%), and hepatic (- 7%) robotic procedures. Rural non-teaching hospitals saw the largest increase in robotic surgery (274%). Urban non-teaching hospitals saw a decrease of 29%. While urban teaching institutions saw a 20% and 6% increase in gynecological and urological procedures, an overall decrease was seen in esophageal (- 10%), gastric (- 12%), intestinal (- 11%), hepatic (- 17%), biliary (- 10%), pancreatic (- 11%) and hernia procedures (- 14%). Biliary procedures saw the largest increase in rural institutions (740 cases; 392%), followed by hernia (144% increase). South region of the nation had the largest increase in robotic procedures (23%). No change was seen in the use of robotic surgery in the northeast region with the midwest and west seeing an overall decrease (- 4% and - 22%, respectively). Our study highlights the increase in use of robotics for both general and specialty surgery, with an increase in utilization over time. Increased incidence of robotic surgery in smaller, rural institutions with overall decrease in larger, urban teaching hospitals suggests increasing comfort in robotic surgery in the community setting. Further studies are necessary to evaluate the factors associated with increased utilization in smaller institutions.

Baseline findings of a multicentric ambispective cohort study (2021-2022) among hospitalised mucormycosis patients in India.

In India, the incidence of mucormycosis reached high levels during 2021-2022, coinciding with the COVID-19 pandemic. In response to this, we established a multicentric ambispective cohort of patients hospitalised with mucormycosis across India. In this paper, we report their baseline profile, clinical characteristics and outcomes at discharge. Patients hospitalized for mucormycosis during March-July 2021 were included. Mucormycosis was diagnosed based on mycological confirmation on direct microscopy (KOH/Calcofluor white stain), culture, histopathology, or supportive evidence from endoscopy or imaging. After consent, trained data collectors used medical records and telephonic interviews to capture data in a pre-tested structured questionnaire. At baseline, we recruited 686 patients from 26 study hospitals, of whom 72.3% were males, 78% had a prior history of diabetes, 53.2% had a history of corticosteroid treatment, and 80% were associated with COVID-19. Pain, numbness or swelling of the face were the commonest symptoms (73.3%). Liposomal Amphotericin B was the commonest drug formulation used (67.1%), and endoscopic sinus surgery was the most common surgical procedure (73.6%). At discharge, the disease was stable in 43.3%, in regression for 29.9% but 9.6% died during hospitalization. Among survivors, commonly reported disabilities included facial disfigurement (18.4%) and difficulties in chewing/swallowing (17.8%). Though the risk of mortality was only 1 in 10, the disability due to the disease was very high. This cohort study could enhance our understanding of the disease's clinical progression and help frame standard treatment guidelines.

Clinical effects of Lactobacillus reuteri probiotic in chronic periodontitis - a systematic review.

OBJECTIVE: This systematic review examines the effectiveness of Lactobacillus reuteri as an adjunct to scaling and root planing in the treatment of chronic periodontitis. MATERIALS AND METHODS: Scopus, PubMed, and Web of Science databases were searched according to specific inclusion and exclusion criteria in October 2022. Randomized control trials that evaluated the effects of Lactobacillus reuteri in patients with periodontitis were included. The primary outcome was pocket depth and clinical attachment levels, while the secondary outcome considered was bleeding on probing, microbial levels, and gingival index score. Study quality was assessed based on the Cochrane Handbook for Systematic Reviews of Interventions and the ROB2 tool. RESULTS: A total of eleven studies that examined 369 subjects were included in the review. Adults in the age group of 18-70 years of age suffering from chronic periodontitis were evaluated. Eight out of the eleven studies reported statistically significant improvement in the intergroup pocket depths, whereas seven studies showed a statistically significant reduction in the clinical attachment levels in the probiotic group. Three studies showed no significant improvement in the pocket depth levels in the probiotic group as compared to the controls. Four studies showed no significant reduction in clinical attachment levels between the two groups. The overall risk of bias was high in four studies, while seven studies reported some concerns about the risk of bias. CONCLUSIONS: Based on the limited evidence available, the adjunctive use of Lactobacillus reuteri to scaling and root planing may provide some additional benefit in improving periodontal parameters.

Field application of Ca-doped ZnO nanoparticles to maize and wheat plants.

Nanoparticles play a vital role in modern agriculture to provide the nutrients required by plants. Herein, we report the preparation of calcium-doped zinc oxide nanoparticles (CZO NPs) via a simple and cost-effective co-precipitation method, with the aim of realizing increased fertilizer response. The synthesized nanoparticles were analyzed to study their physicochemical properties using various characterization techniques. The X-ray diffraction pattern showed a small shift in peak position towards higher values of 2θ and reduced crystal size after the zinc oxide (ZnO) matrix had been doped with Ca. Field-emission scanning electron microscopy images clearly revealed a grain-like surface morphology. The X-ray photoelectron spectroscopy study produced evidence of Zn2+ substitution by Ca2+ and enhanced Zn-O bond strengths in the CZO samples. Two major crops, maize (Zea mays L.) and wheat (Triticum aestivum L.) were selected to study the impact of the CZO NP-based nanofertilizer on plant growth. During the study, the effect of the CZO-based fertilizer on growth parameters such as seed germination, root and shoot length, plant height, root and stem width, number of leaves, and leaf size was studied based on comparisons with control plants. We observed significantly increased plant growth parameters after the application of the CZO NP-based fertilizers.

A Comparative Evaluation of Three Methods of Disinfection of Gypsum Casts and the Changes in Surface Roughness and Dimensional Accuracy after Disinfection-An Ex Vivo Study.

BACKGROUND: One of the major problems of everyday dental practice is cross-contamination. It can place office personnel, dentists, and patients at risk of acquiring serious illness. Disinfection helps in controlling this cross-contamination to an extent. The evaluation was done to find the efficient disinfection method on gypsum casts. AIMS: The aim of this study is to evaluate and compare the efficacy of three methods of disinfection of gypsum casts, namely, chemical disinfection by immersion, spray method, and microwave method, and also to evaluate and compare changes in surface roughness and dimensional accuracy between the three methods after disinfection. MATERIALS AND METHODS: Ex vivo and experimental study. Thirty participants were selected, and impressions of the maxillary arch were made using polyvinyl siloxane impression material. Ninety type IV die stone gypsum casts were poured. It was divided into three groups and was subjected to chemical disinfection by immersion and spray methods, and microwave method. The disinfected casts were evaluated for microbial growth, surface roughness, and dimensional accuracy. It was performed by using the one-way analysis of variance test and paired t-test followed by the Kruskal - Wallis test and Wilcoxon signed rank test (α = 0.05). RESULTS: Microwave disinfection was more effective than both immersion and spray chemical disinfection methods (P < 0.010 and <0.001). The surface roughness of the microwave-irradiated casts had significantly increased after disinfection. However, there were no significant dimensional changes by any of the methods of disinfection. CONCLUSION: Within the limitations of the study, the microwave method of disinfection is more effective in eradicating microorganisms when compared to chemical methods of disinfection by immersion and spray methods.

Sustainable intensification of climate-resilient maize-chickpea system in semi-arid tropics through assessing factor productivity.

Global trends show that the rapid increase in maize production is associated more with the expansion of maize growing areas than with rapid increases in yield. This is possible through achieving possible higher productivity through maize production practices intensification to meet the sustainable production. Therefore, a field experiment on "Ecological intensification of climate-resilient maize-chickpea cropping system" was conducted during consecutive three years from 2017-2018 to 2019-2020 at Main Agricultural Research Station, Dharwad, Karnataka, India. Results of three years pooled data revealed that ecological intensification (EI) treatment which comprises of all best management practices resulted in higher grain yield (7560 kg/ha) and stover yield compared to farmers' practice (FP) and all other treatments which were deficit in one or other crop management practices. Similarly, in the succeeding winter season, significantly higher chickpea yield (797 kg/ha) was recorded in EI. Further EI practice recorded significant amount of soil organic carbon, available nitrogen, phosphorus, potassium, zinc, and iron after completion of third cycle of experimentation (0.60%, 235.3 kg/ha,21.0 kg/ha,363.2 kg/ha,0.52 ppm and 5.2 ppm respectively). Soil enzymatic activity was also improved in EI practice over the years and improvement in each year was significant. Lower input energy use was in FP (17,855.2 MJ/ha). Whereas total output energy produced was the highest in EI practice (220,590 MJ ha-1) and lower output energy was recorded in EI-integrated nutrient management (INM) (149,255 MJ/ha). Lower energy productivity was noticed in EI-INM. Lower specific energy was recorded in FP and was followed by EI practice. Whereas higher specific energy was noticed is EI-INM. Each individual year and pooled data showed that EI practice recorded higher net return and benefit-cost ratio. The lower net returns were obtained in EI-integrated weed management (Rs. 51354.7/ha), EI-recommended irrigation management (Rs. 56,015.3/ha), integrated pest management (Rs. 59,569.7/ha) and farmers' practice (Rs. 67,357.7/ha) which were on par with others.

Public Awareness on Perio-systemic Interplay: A Cross-Sectional Survey in South India.

BACKGROUND: The oral cavity has been referred to as "the gateway to overall health." It is also said to be the meeting point of medicine and dentistry. AIMS: Our study sought to determine the extent to which the public was aware of the connection between oral/periodontal conditions and general health. SETTINGS AND DESIGN: The observational cross-sectional study's questionnaire was sectioned into oral health awareness, systemic influence on oral health, and personal oral health assessment. MATERIALS AND METHODS: A total of 994 responses were recorded and a Chi-square test was performed to uncover the relationships using SPSS version 22.0. According to responses, 70% of the population on average comprehended the responses to the majority of the oral health awareness-related questions. RESULTS: It has been noticed that only 30% of the general public was aware of the prevalent health issues like diabetes, hypertension, and malnutrition's impact on dental health. However, more than 60% had confidence in their oral health and gave a rating of at least 5. CONCLUSION: The study indicates that a good number of the population was prioritizing their oral health. However, there exists a definitive need to improve oral health awareness thereby ameliorating the overall health of an individual.

Evaluating newly approved drugs in combination regimens for multidrug-resistant tuberculosis with fluoroquinolone resistance (endTB-Q): study protocol for a multi-country randomized controlled trial.

BACKGROUND: Treatment for fluoroquinolone-resistant multidrug-resistant/rifampicin-resistant tuberculosis (pre-XDR TB) often lasts longer than treatment for less resistant strains, yields worse efficacy results, and causes substantial toxicity. The newer anti-tuberculosis drugs, bedaquiline and delamanid, and repurposed drugs clofazimine and linezolid, show great promise for combination in shorter, less-toxic, and effective regimens. To date, there has been no randomized, internally and concurrently controlled trial of a shorter, all-oral regimen comprising these newer and repurposed drugs sufficiently powered to produce results for pre-XDR TB patients. METHODS: endTB-Q is a phase III, multi-country, randomized, controlled, parallel, open-label clinical trial evaluating the efficacy and safety of a treatment strategy for patients with pre-XDR TB. Study participants are randomized 2:1 to experimental or control arms, respectively. The experimental arm contains bedaquiline, linezolid, clofazimine, and delamanid. The control comprises the contemporaneous WHO standard of care for pre-XDR TB. Experimental arm duration is determined by a composite of smear microscopy and chest radiographic imaging at baseline and re-evaluated at 6 months using sputum culture results: participants with less extensive disease receive 6 months and participants with more extensive disease receive 9 months of treatment. Randomization is stratified by country and by participant extent-of-TB-disease phenotype defined according to screening/baseline characteristics. Study participation lasts up to 104 weeks post randomization. The primary objective is to assess whether the efficacy of experimental regimens at 73 weeks is non-inferior to that of the control. A sample size of 324 participants across 2 arms affords at least 80% power to show the non-inferiority, with a one-sided alpha of 0.025 and a non-inferiority margin of 12%, against the control in both modified intention-to-treat and per-protocol populations. DISCUSSION: This internally controlled study of shortened treatment for pre-XDR TB will provide urgently needed data and evidence for clinical and policy decision-making around the treatment of pre-XDR TB with a four-drug, all-oral, shortened regimen. TRIAL REGISTRATION: ClinicalTrials.Gov NCT03896685. Registered on 1 April 2018; the record was last updated for study protocol version 4.3 on 17 March 2023.

Comparative Evaluation of Various Lens and Ring Flash Combination for Intraoral Photography.

BACKGROUND: Extraoral and intraoral dental photographs serve as preoperative records and document the entire treatment. Correctly composed orthodontic photographs are crucial for remote diagnosis and may serve as a bulwark against medicolegal challenges. MATERIALS AND METHODS: In this prospective study, intraoral frontal photographs of patients with ideal occlusion were taken using two types of lenses (EF-S 18-55 mm f/3.5-5.6 IS STM lens (Canon, Tokyo, JP), SP 90 mm F/2.8 MACRO VC lens (Model F017 Tamron, NY, USA)) and two different ring flash systems (Meike FC-100 Macro Ring LED Light (Meike, China), Macro Ring flash Lite YN-14EX (Yongnuo digital, China)). The combination of lens and flash used was grouped into four groups. Twenty-eight intraoral photographs of patients were taken. An image quality assessment survey was distributed among two groups - 50 orthodontists and 50 other dental specialists. RESULTS: The participants were asked to assess all the intraoral images and subjectively score them on a scale of one to ten, with one being very poor and ten being excellent, considering the sharpness, color, brightness, contrast, and overall quality of the image. The general dentists rated the images taken with a 90-mm macro lens and ring flash as the best quality photographs. Images obtained using an 18-55 mm lens and ring LED received significantly lesser scores and were graded good by dentists. CONCLUSION: This combination of lens and flash may prove a valuable investment in the long-term aiding in excellent dental images for diagnosis and treatment monitoring.

Validation of Diagnostic Utility of Salivary Urea in Patients with Chronic Kidney Disease in Chennai: A Cross-Sectional Study.

BACKGROUND: Serum urea levels are essential for the diagnosis of chronic kidney disease (CKD), as they are a measure of renal function. Salivary urea has been used as an alternative to serum urea in patients with CKD. AIM: To estimate serum urea levels and their correlation with salivary urea levels in order to validate the use of saliva as an alternative diagnostic tool for renal dysfunction. PATIENTS AND METHODS: Thirty healthy individuals and 150 patients with CKD (30 from each CKD stage) were recruited for the study. Serum and salivary samples were collected to estimate the urea levels, and statistical analyses were performed. RESULTS: Statistically significant (P < 0.05) differences in the mean serum and salivary urea levels were observed between the healthy and each stage of the CKD group; significance at P < 0.05 was observed within the stages of CKD as well. Correlation analysis also showed significant differences between the serum and salivary urea levels at each stage of the disease. Receiver operating characteristic analysis revealed a higher area under the curve of 0.917 at a 95% confidence interval with a salivary urea cut-off of 28.25 mg/dl (sensitivity and specificity: 88% and 84%, respectively). CONCLUSION: The variability in salivary urea levels in the early and late stages suggests the use of salivary urea in the late stages of CKD. It is suggested that salivary urea levels may be used as an alternative to serum to assess and monitor the progression of renal impairment along with other standard renal function markers.

Comparison of bacterial colonization on absorbable non-coated suture with Triclosan- or Chlorhexidine-coated sutures: a randomized controlled study.

OBJECTIVE: The oral cavity is a colossal reservoir for the bacteria. The healing of tissues is compromised after flap surgery, particularly in the presence of sutures, as they can act as repositories for bacteria, ultimately leading to surgical site infections. Hence, antibacterial-coated sutures have been considered as an alternative to reduce the risk of these infections and further improve the wound healing of the tissues after flap surgery. Since minimal information is available on the effect of antibacterial-coated sutures on periodontal tissues, this study aims to clinically and microbiologically assess the antibacterial efficacy of Triclosan (TCS) and Chlorhexidine-coated sutures (CCS) on periodontal tissues compared to non-coated sutures (NCS). PATIENTS AND METHODS: A total of 75 subjects with moderate to severe periodontitis were included in the study and randomly allocated to one of the three groups, (TCS, CCS, and NCS groups) equally. Suture removal was performed on postoperative day 8, and parameters such as wound healing and post-operative pain were evaluated. The retrieved suture samples were subjected to microbiological analysis and the bacteria were identified quantitatively and qualitatively. RESULTS: Intragroup analysis of the wound healing index and post-operative pain for all the groups showed a significant improvement (p<0.01), from day 8 to day 30. Intergroup analysis of the wound healing index revealed significant wound healing (p<0.05) on day 15 and day 30. For post-operative pain, intergroup analyses showed significantly low pain scores (p<0.01) for the TCS group. Microbiologic analysis of aerobic colony counts in both anterior and posterior regions revealed significantly (p<0.01) least colony counts in TCS and highest colony counts in NCS groups, respectively. Although anaerobic colony counts were not statistically significant, relatively fewer colony counts were identified in the TCS group. Whereas, relatively higher anaerobic colony counts were seen in the CCS group in the anterior region and in the NCS group in the posterior region. Qualitative assessment revealed higher amounts of Streptococcus and Staphylococcus species in all the three groups (TCS, CCS, and NCS groups). CONCLUSIONS: Antibacterial-coated sutures, particularly Triclosan-coated sutures, are effective in reducing bacterial accumulation compared to non-coated sutures. Therefore, these sutures can be effectively utilized in periodontal flap surgery.

Success rate of immediately loaded implants in the posterior zone.

Dental implants are considered an ideal treatment for a missing single tooth. Immediate loading of implants can hasten the procedure, providing comfort to the patients. Recently, immediate loading of implants has gained much importance as it helps hasten the procedure and provides more comfort to patients. A previous systematic review published 5 years ago compared the success rates between immediate and conventional loading. There are several factors that influence the success rate of implants that were not discussed in detail in the previous review. Hence, the present systematic review is done to report differences in the outcomes from single implant restorations of missing teeth in the posterior region in patients who were subjected to immediate loading and conventional loading. A follow up for 1 year was done. Electronic databases of Medline, Scopus, and Web of Science were searched for publications in the English Language during May 2021. The search results yielded 306 articles, out of which 225 were excluded based on title and abstract screening. Screening of the remaining 81 full text articles yielded 14 original research articles that satisfied the predefined inclusion criteria. Meta analysis was not possible due to the heterogeneity of the data. The overall success rate of the immediate loading of a single implant is 94.31%. Implants in the maxillary region had a higher survival rate than those in the mandibular region. The age range between 18 and 80 years showed good prognosis and outcomes in older individuals. Good oral hygiene was emphasized for all patients to prevent any secondary conditions or delays in healing.

Comprehensive examination on codon usage bias pattern of the Bovine Ephemeral fever virus.

Bovine Ephemeral Fever Virus (BEFV) is a non-contagious virus that commonly infects cattle and water buffalo, reduces milk productivity, decreases the quality of beef, and causes an adverse economic impact on the global livestock industry. However, the evolution of BEFV is unclear, and uncertainty exists regarding its global geodynamics. Consequently, this study aims to comprehend the pattern of viral evolution and gene expression in the BEFV genes G, M, N, and P, including synonymous codons. Additionally, we performed recombination analyses, which exclusively detected recombination signals in the G- and P-genes. Subsequently, a phylogenetic tree was constructed to validate and support these findings. The codon usage bias results showed that the BEFV-selected genes were influenced by both natural and mutation pressure. Furthermore, nucleotide A is more abundant in all the selected genes. The eNC values, ranging from 42.99 to 47.10, revealed the presence of moderate codon usage bias, where gene P exhibited the highest and gene G had the lowest codon usage bias. The neutrality and PR-2 plots, specified codon usage patterns of the genes, are also being shaped by strong selectional pressure. This comprehensive analysis of BEFV genes (G, M, N, and P) sheds light on the molecular evolutionary patterns, co-adaptation, and different genes expression in diverse regions, facilitating the development of preventative programs and insights into viral pathogenesis and vaccine design.Communicated by Ramaswamy H. Sarma.

Analysis of medians under two-way model with and without interaction for Birnbaum-Saunders distributed response.

The Birnbaum-Saunders (BS) distribution, well-known as the fatigue-life distribution, has been used in numerous disciplines ranging from engineering to medical sciences. In this article, we develop a test for analysis of medians for BS distributed response to assess the impact of two interacting factors on the median, where no test is presently available. The proposed integrated likelihood ratio test (ILRT) eliminates the nuisance shape parameters by integrating them out. The second-order accurate asymptotic chi-square distribution of ILRT is derived. An in-depth simulation study strongly supports its excellent performance even under small group sizes. Furthermore, ILRT developed under the one-way model is found uniformly superior over its peers, is straightway extendable under general multiway setup, and has potential to be extended to other non-normal response variables. Its genuine need in industry, where non-normal responses are commonly encountered, is highlighted through analysis of three real data sets: ILRT strongly picked out the deposition time as influential factor in epitaxial layer experiment, revealed significant impact of spools on fiber life for the failure times of Kevlar 49 fiber data, and gave more accurate parameter estimates in delivery time data experiment, as assessed by various model adequacy tools, where its competitors failed to deliver desired results.

Evaluation of scanning accuracy for two commercially available intraoral scanners in reproducing orthodontic bracket dimensions.

OBJECTIVE: The aim of this study was to compare the scanning accuracy of two different intra-oral scanners- MEDIT i500 and TRIOS 3 shape in reproducing orthodontic bracket dimensions. MATERIALS AND METHODS: This in vivo cross-sectional study comprised seven subjects with a full complement of permanent dentition without third molars. Complete arch scanning was carried out with two intraoral scanners, such as MEDIT i500, TRIOS 3 shape, after bonding with brackets. The control group consisted of bracket dimensions measured directly by using Vernier calipers before bonding. Bracket dimensions of three-dimensional (3D) images were measured by using OrthoAnalyzer software. The accuracy of intraoral scanning was investigated by comparing bracket dimensions among the three groups using One-way ANOVA and Post-Hoc Tukey HSD test, and by evaluating outcomes for each quadrant and an individual tooth in complete-arch scans. RESULTS: When comparing bracket dimensions of 3D images with manual measurements using a traditional Vernier caliper, MEDIT i500 showed no significant difference when compared to the control group (p>0.05) in full arch scanning as well as the quadrant and single tooth scans in complete arch scanning. TRIOS 3 shape showed a significant difference when compared to the control and MEDIT i500 group (p<0.05) for all parameters. CONCLUSIONS: MEDIT i500 showed higher accuracy and better reproduction of orthodontic bracket dimensions than TRIOS 3 shape.

Root surface changes following manual and ultrasonic instrumentation - a scanning electron microscopic study.

OBJECTIVE: The aim of this study is to assess the efficacy of hand and ultrasonic scaling and to evaluate the surface roughness on the root surface of periodontally involved teeth using a scanning electron microscope. PATIENTS AND METHODS: A sample of 90 single-rooted teeth with a hopeless prognosis was selected for the study and divided into three separate groups. Group I consist of no treatment. In Group II, hand scaling was done using Gracey curettes, and in Group III, ultrasonic scaling was done. The teeth were then extracted and fixed in 10% formaldehyde solution for 24-48 hours and subjected to scanning electron microscopic (SEM) evaluation. RESULTS: The SEM analysis revealed that the remaining calculus index was found to be similar in the ultrasonic group and the hand scaling group, whereas the surface roughness was found to be the least in the ultrasonic group. CONCLUSIONS: Hand instrumentation has resulted in more surface roughness as compared to ultrasonic instruments.

A split-mouth randomized controlled trial to compare the rate of canine retraction after a soft tissue procedure compared against a corticotomy procedure for accelerated tooth movement.

Background and Aim: Various methods to accelerate the orthodontic tooth movement have been used, among which corticotomy is considered to be the most common one. The suggested reasoning for such acceleration was the regional acceleratory phenomenon (RAP). Since the RAP is a property of both the hard and soft tissues, we designed a soft tissue flap procedure to compare the effects with the conventional corticotomy procedure. A split-mouth study was conducted where the two procedures were assessed in a single participant. Patients and Methods: The total sample size was calculated to be 40 with 20 participants in each group. The rate of tooth movement was the primary outcome measure, and the secondary outcomes were dentoalveolar changes, which were studied in both the conventional corticotomy and the flap-only procedure based on a cone-beam computed tomography (CBCT) wherein the alveolar bone density (BD) around canines, tipping, and rotational changes in canines, premolars, and molars were assessed. Results: Corticotomy resulted in greater canine angulation, lesser canine rotation and premolar rotation, and greater molar rotation compared with flap elevation, but these differences were statistically insignificant. Conclusion: Though the corticotomy resulted in higher BD, the differences were statistically insignificant. There was no significant difference in the rate of space closure assessed by the two techniques compared.

In Vitro Evaluation of marginal adaptation of polyether ether ketone and zirconia copings.

Background: Polyether ether ketone (PEEK) has emerged as a new thermoplastic material with potential applications as a restorative material. Aim: This study aimed to evaluate the marginal adaptation of PEEK copings compared to zirconia copings using field emission scanning electron microscopy. Materials and Methods: A freshly extracted maxillary central incisor was prepared for a full-coverage restoration following standard principles of tooth preparation. The tooth was sent to a laboratory for fabrication of samples using computer-aided design and manufacturing (CAD/CAM). Twenty samples of polyether ether ketone (PEEK) copings (group A) and 20 of zirconia copings were fabricated (group B). The copings were scanned under a field emission scanning electron microscope and measurements were taken at four distinct points. The marginal adaptation over the buccal, lingual, mesial, and distal margins for both groups was evaluated. One-way analysis of variance (ANOVA) and independent t test were applied. Results: Our findings indicate that PEEK showed better marginal adaptation than zirconia at all measurement points. The mean marginal gap value of the PEEK group was 33.99 ± 8.81 µm and of the zirconia group was 56.21 ± 15.07 µm. On comparing marginal adaptation among the mesial, distal, buccal, and lingual aspects, PEEK showed better adaptation on all four margins, with the best adaptation on the buccal margin that had the lowest mean gap value of 29.27 ± 6.07 µm. The zirconia group adapted best at the distal margin, with a lowest mean gap value of 53.58 ± 15.25 µm (P ≤ 0.05). Conclusion: PEEK copings had better marginal adaptation and fit compared to zirconia copings. It may have applications as a restorative material in fixed prostheses.