An optical sensor for the detection and quantification of lidocaine in cocaine samples.

An optical sensor (OS) was synthesized by mixing 10,12-pentacosadiinoic acid (PDA) with a triblock copolymer for use in the detection/quantification of lidocaine (LD) in seized cocaine hydrochloride (seized CH) samples. In the presence of LD, the OS presented a chromatic transition from blue to red, while no chromatic transition was observed for other typical cocaine adulterants or cocaine hydrochloride. Isothermal titration calorimetry analysis revealed specific interactions between the PDA molecules of the OS and the LD molecules, with these interactions being enthalpically favorable (-1.20 to -36.7 kJ mol-1). Therefore, the OS color change only occurred when LD was present in the sample, making the OS selective for LD. Consequently, LD was successfully detected in seized CH samples, irrespective of the type of adulteration. The OS was used for the quantification of LD in seized CH samples containing different adulterants, providing a linear range of 0.0959 to 0.225% (w/w), a precision of 7.2%, an accuracy ranging from -10 to 10%, and limits of detection and quantification of 0.0110% (w/w) and 0.0334% (w/w), respectively.

Green speciation of iron using aqueous two-phase system.

Fe(II) and Fe(III) have distinct chemical and biological functions. Consequently, it is more important to determine the fraction of both oxidation state that knowing the total iron concentration in a sample. However, green methods for iron speciation are still limited. This work uses aqueous two-phase system, a safe alternative to liquid-liquid extraction, to perform the chemical speciation of iron. This method is based on the reaction of Fe(II) with 1,10-phenanthroline extractant, forming a complex of Fe(II)-phenanthroline that concentrates in the top phase of the system. The Fe(III) specie concentrated in the bottom phase of the system. Iron speciation was affected by the electrolyte nature, macromolecule type, quantity of phenanthroline added, and pH. The system formed by PEO1500 + Na3C6H5O7 + H2O at pH 6.00, containing 5.00 mmol kg-1 of phenanthroline, was successfully used to separate the iron species before determination by flame atomic absorption spectrometry. Under these optimal conditions, a separation factor of 233 was obtained between Fe(II) and Fe(III) with extraction percentages of (95.1 ± 1.0)% and (7.68 ± 0.50)%, respectively The proposed method was successfully applied for iron speciation in water samples, and provided recovery percentages ranging between 90 and 106%.

Green recovery of mercury from domestic and industrial waste.

Recovery of mercury from effluents is fundamental for environmental preservation. A new, green method was developed for separation of mercury from effluent containing different metals. The extraction/separation of Hg(II) was studied using aqueous two-phase system (ATPS) comprising by polyethylene oxide (PEO1500) or triblock copolymers (L64 or L35), electrolyte (sodium citrate or sodium sulfate) and water in the presence or absence of chloride ions. The extraction behavior of the Hg(II) for the macromolecule-rich phase is affected by the following parameters: amount of added extractant, pH, and the nature of the electrolyte and macromolecule of the ATPS. The APTS of PEO1500+sodium citrate+H2O (pH 1.00 and 0.225 mol kg(-1) KCl) produced the highest Hg(II) %E=(92.3 ± 5.2)%. Under the same conditions, excellent separation factors (1.54×10(2)-3.21×10(10)) for recovery of mercury in the presence of co-existing metals were obtained. Efficient and selective extraction of Hg(II) from domestic and industrial synthetic effluents was achieved using this ATPS.