Effects of different amosite preparations on macrophages, lung damages, and autoimmunity.

The underlying mechanisms of asbestos-related autoimmunity are poorly understood. As the size, surface reactivity, and free radical activity of asbestos particles are considered crucial regarding the health effects, this study aims to compare the effects of exposure to pristine amosite (pAmo) or milled amosite (mAmo) particles on lung damage, autoimmunity, and macrophage phenotype. Four months after lung exposure to 0.1 mg of amosite, BAL levels of lactate dehydrogenase, protein, free DNA, CCL2, TGF-ß1, TIMP-1, and immunoglobulin A of pAmo-exposed C57Bl/6 mice were increased when compared to fluids from control- and mAmo-exposed mice. Effects in pAmo-exposed mice were associated with lung fibrosis and autoimmunity including anti-double-strand DNA autoantibody production. mAmo or pAmo at 20 µg/cm2 induced a pro-inflammatory phenotype characterized by a significant increase in TNFα and IL-6 secretion on human monocyte-derived macrophages (MDMs). mAmo and pAmo exposure induced a decrease in the efferocytosis capacities of MDMs, whereas macrophage abilities to phagocyte fluorescent beads were unchanged when compared to control MDMs. mAmo induced IL-6 secretion and reduced the percentage of MDMs expressing MHCII and CD86 markers involved in antigen and T-lymphocyte stimulation. By contrast, pAmo but not mAmo activated the NLRP3 inflammasome, as evaluated through quantification of caspase-1 activity and IL-1ß secretion. Our results demonstrated that long-term exposure to pAmo may induce significant lung damage and autoimmune effects, probably through an alteration of macrophage phenotype, supporting in vivo the higher toxicity of entire amosite (pAmo) with respect to grinded amosite. However, considering their impact on efferocytosis and co-stimulation markers, mAmo effects should not be neglected. KEY MESSAGES: Lung fibrosis and autoimmunity induced by amosite particles depend on their physicochemical characteristics (size and surface) Inhalation exposure of mice to pristine amosite fibers is associated with lung fibrosis and autoimmunity Anti-dsDNA antibody is a marker of autoimmunity in mice exposed to pristine amosite fibers Activation of lung mucosa-associated lymphoid tissue, characterized by IgA production, after exposure to pristine amosite fibers Pristine and milled amosite particle exposure reduced the efferocytosis capacity of human-derived macrophages.

Reaction with Water Vapor Defines Surface Reconstruction and Membranolytic Activity of Quartz Milled in Different Molecular Environments.

Industrial processing of quartz (SiO2) and quartz-containing materials produces toxic dust. Fracturing quartz crystals opens the Si‒O bond and produces highly reactive surface species which mainly react with molecules like water and oxygen. This surface-reconstruction process forms silanol (Si‒OH) on the quartz surface, which can damage biological membranes under specific configurations. To comprehend the impact of the quartz surface restructuring on membranolytic activity, the formation and reactivity of quartz radicals produced in four distinct molecular environments with electron paramagnetic resonance (EPR) spectroscopy are evaluated and their membranolytic activity is measured through in vitro hemolysis test. The four molecular environments are formulated with and without molecular water vapor and oxygen (±H2O/±O2). The absence of water favored the formation of surface radical species. In water-rich environments, diamagnetic species prevailed due to radical recombination. Quartz milled in -H2O/±O2 acquired membranolytic activity when exposed to water vapor, unlike quartz milled in +H2O/±O2. After being stabilized by reaction with water vapor, the membranolytic activity of quartz is maintained over time. It is demonstrated that the type and the reactivity of radical sites on quartz are modulated by the outer molecular environment, ultimately determining the biological activity of milled quartz dust.

Physico-Chemical Approaches to Investigate Surface Hydroxyls as Determinants of Molecular Initiating Events in Oxide Particle Toxicity.

The study of molecular recognition patterns is crucial for understanding the interactions between inorganic (nano)particles and biomolecules. In this review we focus on hydroxyls (OH) exposed at the surface of oxide particles (OxPs) which can play a key role in molecular initiating events leading to OxPs toxicity. We discuss here the main analytical methods available to characterize surface OH from a quantitative and qualitative point of view, covering thermogravimetry, titration, ζ potential measurements, and spectroscopic approaches (NMR, XPS). The importance of modelling techniques (MD, DFT) for an atomistic description of the interactions between membranes/proteins and OxPs surfaces is also discussed. From this background, we distilled a new approach methodology (NAM) based on the combination of IR spectroscopy and bioanalytical assays to investigate the molecular interactions of OxPs with biomolecules and membranes. This NAM has been already successfully applied to SiO2 particles to identify the OH patterns responsible for the OxPs' toxicity and can be conceivably extended to other surface-hydroxylated oxides.

Gasdermin D membrane pores orchestrate IL-1α secretion from necrotic macrophages after NFS-rich silica exposure.

IL-1α is an intracellular danger signal (DAMP) released by macrophages contributing to the development of silica-induced lung inflammation. The exact molecular mechanism orchestrating IL-1α extracellular release from particle-exposed macrophages is still unclear. To delineate this process, murine J774 and bone-marrow derived macrophages were exposed to increasing concentrations (1-40 cm2/ml) of a set of amorphous and crystalline silica particles with different surface chemical features. In particular, these characteristics include the content of nearly free silanols (NFS), a silanol population responsible for silica cytotoxicity recently identified. We first observed de novo stocks of IL-1α in macrophages after silica internalization regardless of particle physico-chemical characteristics and cell stress. IL-1α intracellular production and accumulation were observed by exposing macrophages to biologically-inert or cytotoxic crystalline and amorphous silicas. In contrast, only NFS-rich reactive silica particles triggered IL-1α release into the extracellular milieu from necrotic macrophages. We demonstrate that IL-1α is actively secreted through the formation of gasdermin D (GSDMD) pores in the plasma membrane and not passively released after macrophage plasma membrane lysis. Our findings indicate that the GSDMD pore-dependent secretion of IL-1α stock from macrophages solely depends on cytotoxicity induced by NFS-rich silica. This new regulated process represents a key first event in the mechanism of silica toxicity, suitable to refine the existing adverse outcome pathway (AOP) for predicting the inflammatory activity of silicas.

Cytotoxicity of fibrous antigorite from New Caledonia.

Exposure to asbestos and asbestos-like minerals has been related to the development of severe lung diseases, including cancer and malignant mesothelioma (MM). A high incidence of non-occupational MM was observed in New Caledonia (France) in people living in proximity of serpentinite outcrops, containing chrysotile and fibrous antigorite. Antigorite is a magnesium silicate, which shares with chrysotile asbestos the chemical formula. To achieve information on antigorite toxicity, we investigated the physico-minero-chemical features relevant for toxicity and cellular effects elicited on murine macrophages (MH-S) and alveolar epithelial cells (A549) of three fibrous antigorites (f-Atg) collected in a Caledonian nickel lateritic ore and subjected to supergene alteration. Field Atg were milled to obtain samples suitable for toxicological studies with a similar particle size distribution. UICC chrysotile (Ctl) and a non-fibrous antigorite (nf-Atg) were used as reference minerals. A high variability in toxicity was observed depending on shape, chemical alteration, and surface reactivity. The antigorites shared with Ctl a similar surface area (16.3, 12.1, 20.3, 13.4, and 15.6 m2/g for f-Atg1, 2, 3, nf-Atg, and Ctl). f-Atg showed different level of pedogenetic weathering (Ni depletion f-Atg1 ≪ f-Atg2 and 3) and contained about 50% of elongated mineral particles, some of which exhibited high aspect ratios (AR > 10 µm, 20%, 26%, 31% for f-Atg1, 2, and 3, respectively). The minerals differed in bio-accessible iron at pH 4.5 (f-Atg1 ≪ f-Atg3, < f-Atg2, nf-Atg < Ctl), and surface reactivity (ROS release in solution, f-Atg1 ≪ f-Atg2, 3, nf-Atg, and Ctl). f-Atg2 and f-Atg3 induced oxidative stress and pro-inflammatory responses, while the less altered, poorly reactive sample (f-Atg1) induced negligible effects, as well nf-Atg. The slow dissolution kinetics observed in simulated body fluids may signal a high biopersistence. Overall, our work revealed a significative cellular toxicity of f-Atg that correlates with fibrous habit and surface reactivity.

Top-Down Preparation of Nanoquartz for Toxicological Investigations.

Occupational exposure to quartz dust is associated with fatal diseases. Quartz dusts generated by mechanical fracturing are characterized by a broad range of micrometric to nanometric particles. The contribution of this nanometric fraction to the overall toxicity of quartz is still largely unexplored, primarily because of the strong electrostatic adhesion forces that prevent isolation of the nanofraction. Furthermore, fractured silica dust exhibits special surface features, namely nearly free silanols (NFS), which impart a membranolytic activity to quartz. Nanoquartz can be synthetized via bottom-up methods, but the surface chemistry of such crystals strongly differs from that of nanoparticles resulting from fracturing. Here, we report a top-down milling procedure to obtain a nanometric quartz that shares the key surface properties relevant to toxicity with fractured quartz. The ball milling was optimized by coupling the dry and wet milling steps, using water as a dispersing agent, and varying the milling times and rotational speeds. Nanoquartz with a strong tendency to form submicrometric agglomerates was obtained. The deagglomeration with surfactants or simulated body fluids was negligible. Partial lattice amorphization and a bimodal crystallite domain size were observed. A moderate membranolytic activity, which correlated with the number of NFS, signaled coherence with the previous toxicological data. A membranolytic nanoquartz for toxicological investigations was obtained.

Molecular recognition between membrane epitopes and nearly free surface silanols explains silica membranolytic activity.

Inhaled crystalline silica causes inflammatory lung diseases, but the mechanism for its unique activity compared to other oxides remains unclear, preventing the development of potential therapeutics. Here, the molecular recognition mechanism between membrane epitopes and "nearly free silanols" (NFS), a specific subgroup of surface silanols, is identified and proposed as a novel broad explanation for particle toxicity in general. Silica samples having different bulk and surface properties, specifically different amounts of NFS, are tested with a set of membrane systems of decreasing molecular complexity and different charge. The results demonstrate that NFS content is the primary determinant of membrane disruption causing red blood cell lysis and changes in lipid order in zwitterionic, but not in negatively charged liposomes. NFS-rich silica strongly and irreversibly adsorbs zwitterionic self-assembled phospholipid structures. This selective interaction is corroborated by density functional theory and supports the hypothesis that NFS recognize membrane epitopes that exhibit a positive quaternary amino and negative phosphate group. These new findings define a new paradigm for deciphering particle-biomembrane interactions that will support safer design of materials and what types of treatments might interrupt particle-biomembrane interactions.

Nearly free silanols drive the interaction of crystalline silica polymorphs with membranes: Implications for mineral toxicity.

Crystalline silica (CS) is a well-known hazardous material that causes severe diseases including silicosis, lung cancer, and autoimmune diseases. However, the hazard associated to crystalline silica is extremely variable and depends on some specific characteristics, including crystal structure and surface chemistry. The crystalline silica polymorphs share the SiO2 stoichiometry and differentiate for crystal structure. The different crystal lattices in turn expose differently ordered hydroxyl groups at the crystal surface, i.e., the silanols. The nearly free silanols (NFS), a specific population of weakly interacting silanols, have been recently advanced as the key surface feature that governs recognition mechanisms between quartz and cell membrane, initiating toxicity. We showed here that the nearly free silanols occur on the other crystalline silica polymorphs and take part in the molecular interactions with biomembranes. A set of crystalline silica polymorphs, including quartz, cristobalite, tridymite, coesite, and stishovite, was physico-chemically characterized and the membranolytic activity was assessed using red blood cells as model membranes. Infrared spectroscopy in highly controlled conditions was used to profile the surface silanol topochemistry and the occurrence of surface nearly free silanols on crystalline silica polymorphs. All crystalline silica polymorphs, but stishovite were membranolytic. Notably, pristine stishovite did not exhibited surface nearly free silanols. The topochemistry of surface silanols was modulated by thermal treatments, and we showed that the occurrence of nearly free silanols paralleled the membranolytic activity for the crystalline silica polymorphs. These results provide a comprehensive understanding of the structure-activity relationship between nearly free silanols and membranolytic activity of crystalline silica polymorphs, offering a possible clue for interpreting the molecular mechanisms associated with silica hazard and bio-minero-chemical interfacial phenomena, including prebiotic chemistry.

Nearly free surface silanols are the critical molecular moieties that initiate the toxicity of silica particles.

Inhalation of silica particles can induce inflammatory lung reactions that lead to silicosis and/or lung cancer when the particles are biopersistent. This toxic activity of silica dusts is extremely variable depending on their source and preparation methods. The exact molecular moiety that explains and predicts this variable toxicity of silica remains elusive. Here, we have identified a unique subfamily of silanols as the major determinant of silica particle toxicity. This population of "nearly free silanols" (NFS) appears on the surface of quartz particles upon fracture and can be modulated by thermal treatments. Density functional theory calculations indicates that NFS locate at an intersilanol distance of 4.00 to 6.00 Å and form weak mutual interactions. Thus, NFS could act as an energetically favorable moiety at the surface of silica for establishing interactions with cell membrane components to initiate toxicity. With ad hoc prepared model quartz particles enriched or depleted in NFS, we demonstrate that NFS drive toxicity, including membranolysis, in vitro proinflammatory activity, and lung inflammation. The toxic activity of NFS is confirmed with pyrogenic and vitreous amorphous silica particles, and industrial quartz samples with noncontrolled surfaces. Our results identify the missing key molecular moieties of the silica surface that initiate interactions with cell membranes, leading to pathological outcomes. NFS may explain other important interfacial processes involving silica particles.

Cytotoxicity of fractured quartz on THP-1 human macrophages: role of the membranolytic activity of quartz and phagolysosome destabilization.

The pathogenicity of quartz involves lysosomal alteration in alveolar macrophages. This event triggers the inflammatory cascade that may lead to quartz-induced silicosis and eventually lung cancer. Experiments with synthetic quartz crystals recently showed that quartz dust is cytotoxic only when the atomic order of the crystal surfaces is upset by fracturing. Cytotoxicity was not observed when quartz had as-grown, unfractured surfaces. These findings raised questions on the potential impact of quartz surfaces on the phagolysosomal membrane upon internalization of the particles by macrophages. To gain insights on the surface-induced cytotoxicity of quartz, as-grown and fractured quartz particles in respirable size differing only in surface properties related to fracturing were prepared and physico-chemically characterized. Synthetic quartz particles were compared to a well-known toxic commercial quartz dust. Membranolysis was assessed on red blood cells, and quartz uptake, cell viability and effects on lysosomes were assessed on human PMA-differentiated THP-1 macrophages, upon exposing cells to increasing concentrations of quartz particles (10-250 µg/ml). All quartz samples were internalized, but only fractured quartz elicited cytotoxicity and phagolysosomal alterations. These effects were blunted when uptake was suppressed by incubating macrophages with particles at 4 °C. Membranolysis, but not cytotoxicity, was quenched when fractured quartz was incubated with cells in protein-supplemented medium. We propose that, upon internalization, the phagolysosome environment rapidly removes serum proteins from the quartz surface, restoring quartz membranolytic activity in the phagolysosomes. Our findings indicate that the cytotoxic activity of fractured quartz is elicited by promoting phagolysosomal membrane alteration.

The puzzling issue of silica toxicity: are silanols bridging the gaps between surface states and pathogenicity?

BACKGROUND: Silica continues to represent an intriguing topic of fundamental and applied research across various scientific fields, from geology to physics, chemistry, cell biology, and particle toxicology. The pathogenic activity of silica is variable, depending on the physico-chemical features of the particles. In the last 50 years, crystallinity and capacity to generate free radicals have been recognized as relevant features for silica toxicity. The 'surface' also plays an important role in silica toxicity, but this term has often been used in a very general way, without defining which properties of the surface are actually driving toxicity. How the chemical features (e.g., silanols and siloxanes) and configuration of the silica surface can trigger toxic responses remains incompletely understood. MAIN BODY: Recent developments in surface chemistry, cell biology and toxicology provide new avenues to improve our understanding of the molecular mechanisms of the adverse responses to silica particles. New physico-chemical methods can finely characterize and quantify silanols at the surface of silica particles. Advanced computational modelling and atomic force microscopy offer unique opportunities to explore the intimate interactions between silica surface and membrane models or cells. In recent years, interdisciplinary research, using these tools, has built increasing evidence that surface silanols are critical determinants of the interaction between silica particles and biomolecules, membranes, cell systems, or animal models. It also has become clear that silanol configuration, and eventually biological responses, can be affected by impurities within the crystal structure, or coatings covering the particle surface. The discovery of new molecular targets of crystalline as well as amorphous silica particles in the immune system and in epithelial lung cells represents new possible toxicity pathways. Cellular recognition systems that detect specific features of the surface of silica particles have been identified. CONCLUSIONS: Interdisciplinary research bridging surface chemistry to toxicology is progressively solving the puzzling issue of the variable toxicity of silica. Further interdisciplinary research is ongoing to elucidate the intimate mechanisms of silica pathogenicity, to possibly mitigate or reduce surface reactivity.

Ζ potential evidences silanol heterogeneity induced by metal contaminants at the quartz surface: Implications in membrane damage.

Among the physico-chemical features responsible for the so-called "variability of quartz hazard", a key role has been assigned to the silica surface charge, evaluated by means of ζ potential measurement. The ζ potential of silica describes the protonation state of silanols which, in turn, determine interactions with cell membranes. To gain a molecular understanding of the role of silanols in silica pathogenicity, we conducted a systematic investigation of the variation of the ζ potential as a function of pH (ζ plot titration curve) on a large set of respirable quartz particles with different levels of metal contaminants. The membranolytic activity of the particles on red blood cells, used as a readout of pathogenic activity, was assessed in parallel. Pure quartz surfaces showed sigmoid-shaped ζ plots suggesting the presence of silanol families with similar acidity, whereas contaminated dusts exhibited convex-shaped ζ plots, indicating a higher silanol heterogeneity on contaminated surfaces with respect to the pure ones. The quartz particles with a higher surface heterogeneity related to metal contamination showed a higher membranolytic activity. By removing structural defects and chemical heterogeneity, the ζ plot shifted towards the typical shape of pure quartz and the membranolytic activity was reduced. We conclude that the ζ plot is a useful readout to measure the acid-base behavior of quartz surfaces and to describe the chemical heterogeneity of quartz silanols. Surface heterogeneity, here induced by metal contamination, is proposed as the main cause of quartz membranolytic activity, further supporting the hypothesis that surface silanol disorganization determines silica pathogenicity.

Unveiling the Variability of "Quartz Hazard" in Light of Recent Toxicological Findings.

The variability of quartz hazard stands as one of the most puzzling issues in particle toxicology, notwithstanding the fact that silicosis, the most ancient occupational disease, was the very topic from which the study of the toxicity of particulates developed. Over the years, other adverse effects of silica particles (i.e., lung cancer and autoimmune diseases) were detected and described. However, a few gaps are still present in the physicochemical determinants and cellular pathways involved in the mechanisms of silica pathogenicity. In this perspective, we illustrate how pooling together studies in occupational health and nanotoxicology might fill such gaps, yielding a consistent picture of what imparts toxicity to a given silica source. Recent investigations have shown that crystallinity is not implied in the pathogenic process of silica per se, while patches of disorganized silanols at the surface of both crystalline and amorphous particles can promote membrane damage and inflammation, a process at the origin of silica-related diseases. Introducing these new findings into the accepted multistep model of silica pathogenicity, we obtain a picture of the chemical features of silica governing each cellular step in agreement with the outcomes of major previous studies. We ascribe the origin of the variability of silica hazard mainly to the distribution of various moieties at the particle surface, with silanols playing the major role. Toxicity turns out to be likely predictable by an ad hoc surface characterization. Tailored modifications of the surface can be envisaged to prepare safe materials or blunt toxicity in existing ones.

Editor's Highlight: Abrasion of Artificial Stones as a New Cause of an Ancient Disease. Physicochemical Features and Cellular Responses.

New outbursts of silicosis were recently reported among workers manufacturing an engineered material known as "artificial stone," composed by high percentages of quartz (up to 98%) agglomerated with pigments and polymeric resins. Dusts released by abrasion during artificial stone polishing were characterized for particle size, morphology, and elemental composition and studied for (1) ability to catalyze free radical generation in acellular tests, (2) membranolytic potential on human erythrocytes, (3) cytotoxic activity (lactate dehydrogenase release) on murine alveolar macrophages (MH-S) and human bronchial epithelial (BEAS-2B) cell lines, (4) induction of epithelial-mesenchymal transition (EMT) in BEAS-2B cells. Min-U-Sil 5 was used as reference quartz. Artificial stone dusts exhibited morphological features close to quartz, but contained larger amount of metal transition ions (mainly, Fe, Cu, and Ti), potentially responsible for the high reactivity in free radical generation observed. Opposite to Min-U-Sil 5, they were neither hemolytic nor cytotoxic on MH-S cells, a low cytotoxicity only being observed with BEAS-2B cells. The presence on the particle surface of residues of the resin accounts for this attenuated behavior, as hemolysis appeared and cytotoxicity increased after thermal degradation of the resin, when the free quartz surface was exposed. All dusts induced EMT with loss of E-cadherin expression and increased the expression of mesenchymal proteins (α-smooth muscle actin and vimentin). This may contribute to explain the development of fibrosis on workers exposed to artificial stone dusts.

Revisiting the paradigm of silica pathogenicity with synthetic quartz crystals: the role of crystallinity and surface disorder.

BACKGROUND: Exposure to some - but not all - quartz particles is associated to silicosis, lung cancer and autoimmune diseases. What imparts pathogenicity to any single quartz source is however still unclear. Crystallinity and various surface features are implied in toxicity. Quartz dusts used so far in particle toxicology have been obtained by grinding rocks containing natural quartz, a process which affects crystallinity and yields dusts with variable surface states. To clarify the role of crystallinity in quartz pathogenicity we have grown intact quartz crystals in respirable size. METHODS: Quartz crystals were grown and compared with a fractured specimen obtained by grinding the largest synthetic crystals and a mineral quartz (positive control). The key physico-chemical features relevant to particle toxicity - particle size distribution, micromorphology, crystallinity, surface charge, cell-free oxidative potential - were evaluated. Membranolysis was assessed on biological and artificial membranes. Endpoints of cellular stress were evaluated on RAW 264.7 murine macrophages by High Content Analysis after ascertaining cellular uptake by bio-TEM imaging of quartz-exposed cells. RESULTS: Quartz crystals were grown in the submicron (n-Qz-syn) or micron (µ-Qz-syn) range by modulating the synthetic procedure. Independently from size as-grown quartz crystals with regular intact faces did not elicit cellular toxicity and lysosomal stress on RAW 264.7 macrophages, and were non-membranolytic on liposome and red blood cells. When fractured, synthetic quartz (µ-Qz-syn-f) attained particle morphology and size close to the mineral quartz dust (Qz-f, positive control) and similarly induced cellular toxicity and membranolysis. Fracturing imparted a higher heterogeneity of silanol acidic sites and radical species at the quartz surface. CONCLUSIONS: Our data support the hypothesis that the biological activity of quartz dust is not due to crystallinity but to crystal fragmentation, when conchoidal fractures are formed. Besides radical generation, fracturing upsets the expected long-range order of non-radical surface moieties - silanols, silanolates, siloxanes - which disrupt membranes and induce cellular toxicity, both outcomes associated to the inflammatory response to quartz.

Why does the hemolytic activity of silica predict its pro-inflammatory activity?

BACKGROUND: The hemolytic activity of inhaled particles such as silica has been widely investigated in the past and represents a usual toxicological endpoint to characterize particle reactivity despite the fact that red blood cells (RBCs) are not involved in the pathogenesis of pulmonary inflammation or fibrosis caused by some inhaled particles. The inflammatory process induced by silica starts with the activation of the inflammasome, which leads to the release of mature IL-1ß. One of the upstream mechanisms causing activation of the inflammasome is the labilization of the phagolysosomal membrane after particle phagocytosis. Considering RBC lysis as a model of membrane damage, we evaluated the relationship between hemolytic activity and inflammasome-dependent release of IL-1ß for a panel of selected silica particles, in search of the toxicological significance of the hemolytic activity of an inhaled particle. METHODS: Well-characterized silica particles, including four quartz samples and a vitreous silica, with different surface properties and hemolytic potential were tested for their capacity to induce inflammasome-dependent release of IL-1ß in LPS-primed primary murine peritoneal macrophages by ELISA and Western blot analysis. The mechanisms of IL-1ß maturation and release were clarified by using ASC-deficient cells and inhibitors of phagocytosis and cathepsin B. RESULTS: The silica samples induced dose-dependent hemolysis and IL-1ß release of different amplitudes. A significant correlation between IL-1ß release and hemolytic activity was evidenced (r = 0.827) by linear regression analysis. IL-1ß release was completely abolished in ASC-deficient cells and reduced by inhibitors, confirming the involvement of the inflammasome and the requirement of phagocytosis and cathepsin B for activation. CONCLUSIONS: The same physico-chemical properties of silica particles which are relevant for the lysis of the RBC membrane also appear implicated in the labilization of the phagolysosome, leading to inflammasome activation and release of the pro-inflammatory cytokine IL-1ß. These findings strengthen the relevance of the hemolysis assay to predict the pro-inflammatory activity of silica dusts.

In search of the chemical basis of the hemolytic potential of silicas.

The membranolytic activity of silica particles toward red blood cells (RBCs) has been known for a long time and is sometimes associated with silica pathogenicity. However, the molecular mechanism and the reasons why hemolysis differs according to the silica form are still obscure. A panel of 15 crystalline (pure and commercial) and amorphous (pyrogenic, precipitated from aqueous solutions, vitreous) silica samples differing in size, origin, morphology, and surface chemical composition were selected and specifically prepared. Silica particles were grouped into six groups to compare their potential in disrupting RBC membranes so that one single property differed in each group, while other features were constant. Free radical production and crystallinity were not strict determinants of hemolytic activity. Particle curvature and morphology modulated the hemolytic effect, but silanols and siloxane bridges at the surface were the main actors. Hemolysis was unrelated to the overall concentration of silanols as fully rehydrated surfaces (such as those obtained from aqueous solution) were inert, and one pyrogenic silica also lost its membranolytic potential upon progressive dehydration. Overall results are consistent with a model whereby hemolysis is determined by a defined surface distribution of dissociated/undissociated silanols and siloxane groups strongly interacting with specific epitopes on the RBC membrane.